2N6489 - Continental Device India Limited

Continental Device India Limited Data Sheet Page 1 of 3

2N6486, 6487, 6488 NPN PLASTIC POWER TRANSISTORS

2N6489, 6490, 6491 PNP PLASTIC POWER TRANSISTORS

General Purpose Amplifier and Switching Applications

ABSOLUTE MAXIMUM RATINGS 6486 6487 6488

6489 6490 6491

Collector-base voltage (open emitter) VCBO max. 50 70 90 V

Collector-emitter voltage (open base) VCEO max. 40 60 80 V

Collector current ICmax. 15 A

Total power dissipation up to TC = 25°C Ptot max. 75 W

Junction temperature Tjmax. 150 °C

Collector-emitter saturation voltage

IC = 5 A; IB = 0.5 A VCEsat max. 1.3 V

D.C. current gain

IC = 5 A; VCE = 4 V hFE min. 20

max. 150

RATINGS (at TA=25°C unless otherwise specified)

Limiting values 6486 6487 6488

6489 6490 6491

Collector-base voltage (open emitter) VCBO max. 50 70 90 V

Collector-emitter voltage (open base) VCEO max. 40 60 80 V

Emitter-base voltage (open collector) VEBO max. 5.0 V

2N6486, 2N6487, 2N6488

2N6489, 2N6490, 2N6491

PIN CONFIGURATION

1. BASE

2. COLLECTOR

3. EMITTER

4. COLLECTOR

123

CDIM MIN. MAX.

All diminsions in mm.

A 14.42 16.51

B 9.63 10.67

C 3.56 4.83

D0.90

E 1.15 1.40

F 3.75 3.88

G 2.29 2.79

H 2.54 3.43

J0.56

K 12.70 14.73

L 2.80 4.07

M 2.03 2.92

N 31.24

ODEG 7

123

TO-220 Plastic Package

Continental Device India Limited

An ISO/TS16949 and ISO 9001 Certified Company

Continental Device India Limited Data Sheet Page 2 of 3

Collector current ICmax. 15 A

Base current IBmax. 5.0 A

Total power dissipation up to TC = 25°C Ptot max. 75 W

Derate above 25°C max. 0.6

Total power dissipation up to TA = 25°C Ptot max. 1.8 W

Derate above 25°C max. 0.014

Junction temperature Tjmax. 150 °C

Storage temperature Tstg –65 to +150 °

THERMAL RESISTANCE

From junction to ambient Rth j–a 70 °

C/W

From junction to case Rth j–c 1.67 °

C/W

CHARACTERISTICS

Tamb = 25°C unless otherwise specified 6486 6487 6488

6489 6490 6491

Collector cutoff current

IB = 0; VCE = 20 V ICEO max. 1.0 – – mA

IB = 0; VCE = 30 V ICEO max. – 1.0 – mA

IB = 0; VCE = 40 V ICEO max. – – 1.0 mA

VEB(off) = 1.5 V; VCE = 45 V ICEX max.500 – – µA

VEB(off) = 1.5 V; VCE = 65 V ICEX max. – 500 – µA

VEB(off) = 1.5 V; VCE = 85 V ICEX max. – – 500 µA

VEB(off) = 1.5 V; VCE = 40 V; TC=150°C ICEX max. 5.0 – – mA

VEB(off) = 1.5 V; VCE = 60 V; TC=150°C ICEX max. – 5.0 – mA

VEB(off) = 1.5 V; VCE = 80 V; TC=150°C ICEX max. – – 5.0 mA

Emitter cut-off current

IC = 0; VEB = 5 V IEBO max. 1.0 mA

Breakdown voltages

IC = 200 mA; IB = 0 VCEO(sus)* min. 40 60 80 V

IC = 1 mA; IE = 0 VCBO min. 50 70 90 V

IC = 200 mA; VBE = 1.5 V VCEX(sus)* min. 50 70 90 V

IE = 1 mA; IC = 0 VEBO min. 5.0 V

Saturation voltages

IC = 5 A; IB = 0.5 A VCEsat* max. 1.3 V

IC = 15 A; IB = 5 A VCEsat* max. 3.5 V

Base-emitter on voltage

IC = 5 A; VCE = 4 V VBE(on)* max. 1.3 V

IC = 15 A; VCE = 4 V VBE(on)* max. 3.5 V

D.C. current gain

IC = 5 A; VCE = 4 V hFE* min. 20

max. 150

IC = 15 A; VCE = 4 V hFE* min. 5.0

Transition frequency

IC = 1 A; VCE = 4 V; f = 1 MHz fT(1) min. 5.0 MHz

Small signal current gain

IC = 1.0A; VCE = 4V; f = 1.0 KHz hfe min. 25

* Pulse test: pulse width ≤ 300 µs; duty cycle ≤ 2%

(1) fT = |hfe|• ftest

2N6486, 2N6487, 2N6488

2N6489, 2N6490, 2N6491

Continental Device India Limited Data Sheet Page 3 of 3

Notes

Disclaimer

The product information and the selection guides facilitate selection of the CDIL's Discrete Semiconductor Device(s) best suited

for application in your product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as

to confirm that the Device(s) meet functionality parameters for your application. The information furnished on the CDIL Web Site/

CD is believed to be accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete

information. Furthermore, CDIL does not assume liability whatsoever, arising out of the application or use of any CDIL product;

neither does it convey any license under its patent rights nor rights of others. These products are not designed for use in life

saving/support appliances or systems. CDIL customers selling these products (either as individual Discrete Semiconductor

Devices or incorporated in their end products), in any life saving/support appliances or systems or applications do so at their own

risk and CDIL will not be responsible for any damages resulting from such sale(s).

CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.

CDIL is a registered Trademark of

Continental Device India Limited

C-120 Naraina Industrial Area, New Delhi 110 028, India.

Telephone + 91-11-2579 6150, 5141 1112 Fax + 91-11-579 5290, 5141 1119

email@cdil.com www.cdilsemi.com