NSVS1100 Mar-04
Application
243.95MHz PHS 1st IF
Electrical Specification: (Table 1)
The device characteristics are measured in the circuit shown in Fig.1.
Table 1. Elect r ical Specifications Spec. Typ.
243.95MHz -
±130kHz -
4.0dB 3.0dB
1.0dB 0.40dB
1.0us 0.40us
--
Attenuation f0± 600kHz 25dB 30dB
f0±10.7MHz 40dB 60dB
f0±21.4MHz 60dB 65dB
---
Ripple f0±100kHz
Group Delay Time Ripple f0±100kHz
Item
Nominal Center Fr equency (f0)
3dB Band Width
Insertion Loss at f0
Maximum Rating: (Table 2)
Mechanical Specifications: (Fig.2)
Package is designed as small as 3.0x3.0x1.15[mm3] for SMD (Surface Mount Device) type.
Notice:
This part is electrostatic discharge sensitive and may be damaged by improper handling.
Table 2. Maximum Ratings
Item Rating
Maximum Input Pow er +5dBm
Operating Temperature Range -10~+60ºC
S torage Temperature -40~+85ºC
JRC SAW FILTER
NSVS1100
Communications Equipment Division
Communications Equipment Marketing Department
10-1, Nishi-Shinjuku 6-chome, Shinjuku-ku,
Tokyo, 160-8328 Japan
Tel. +81 3-3348-3845
Fax. +81 3-3348-3935
http://www.jrc.co.jp/jp/product/device/saw/index.html (Japanese)
http://www.jrc.co.jp/eng/product/comm/device/saw/saw_top_e.html (English)
UNDER
DEVELOPMENT
NSVS1100 Mar-04
Pin no. Connection
1 GND
2 GND
3 IN/OUT
4 GND
5 OUT/IN
6 GND
7 OUT/IN
8 GND
UNDER
DEVELOPMENT
Fig.1 Measuring circuit
1
2
3 4 5
6
7
8
S
A
W
IN
50Ω
OUT
Ω
50
430
S3
Marking
(1) Lot Number
(a) Year
(b) Month
Oct. --- X
Nov. --- Y
Dec. --- Z
(c) Date
0 - 90
10 - 19 1
20 - 31 2
(2) Part number Mark
0.93
0.60.93 3.8
1.15 0.6 1.15
3.8
Via-Hole(
Φ
0.3)
Fig.3 Desirable land area (in mm)
Fig.2 Package dimension s (in mm)
(0.55)
(0.6)
[4x]
(0.53)
[4x]
(0.75)
1
2
3
4
5
6
1.15±0.15
3.0±0.15
3.0±0.15
(a)
(1)
(2)
7
(1.2)
8[6x]
(c)
(b)
NSVS1100 Mar-04
Notice
1. Use this component within operating temperature range. It might not be
satisfied with electrical specification without operating temperature range.
When it is used less than –10ºC or more than +60ºC, it might be a cause of
degradation or destruction of the component. Even if it endures during a short
time, it causes degradation of qualification.
2. When soldering iron is used, solder with the temperature at the tip of
soldering ir on: 350ºC max., the time of solder ing: 10 seconds max., the power
of soldering iron: 30W max..
3. Notice that the allowed time of soldering with soldering iron is accumulated
time, when soldering is repeated.
4. As rapid temperature change for cleaning after reflow soldering might be a
cause of destruction clean this component after confirming that temperature
of this co mponent goes down to room tempe rature.
5. Confirm that there are not any influence for qualification to this component in
mounting on PCB when this component is cleaned.
6. As it might be a cause of degradation of destruction to apply static electricity
to this component, do not apply static electricity or excessive voltage while
assembling and measuring. And do not transport this component with bare
hand.
Note
1. This specification specifies the quality of this component as a single unit. Make
sure that this component is evaluated and confirmed against this specification
when it is mounted to your products.
2. The information contained herein may be changed without prior notice. It is
therefore advisable to contact Japan Radio Company before proceeding with
the design of equipment incorporating this product.
NSVS1100 Mar-04
Fig.4
LQW18ANR11G00
(Murata)
110nH
LQW18ANR11G00
(Murata)
110nH
GRM1554C1H2R0Z01
(Murata)
2pF
GRM1554C1H2R0Z01
(Murata)
2pF
1
2
3 4 5
6
7
8
S
A
W
IN
50Ω
OUT
Ω
50
UNDER
DEVELOPMENT
Insertion Loss
Frequency[MHz]
[dB]
Return Loss
Smith Chart
S11
S22
Center Freq. 243.95 [MHz]
Freq.Span 0 [MHz]
[5dB/div]
0
2
4
6
8
10
243.45 243.95 244.45
Japan Radio Co.,Ltd
NSVS1100
Insertion Loss
Frequency[MHz]
[dB]
Return Loss
Smith Chart
S11
S22
Center Freq. 243.95 [MHz]
Freq.Span 2 [MHz]
[5dB/div]
0
20
40
60
80
100
242.45 243.95 245.45
Japan Radio Co.,Ltd
NSVS1100
Insertion Loss
Frequency[MHz]
[dB]
Return Loss
Smith Chart
S11
S22
Center Freq. 243.95 [MHz]
Freq.Span 9 [MHz]
[5dB/div]
0
20
40
60
80
100
238.95 243.95 248.95
Japan Radio Co.,Ltd
NSVS1100
Insertion Loss
Frequency[MHz]
[dB]
Return Loss
Smith Chart
S11
S22
Center Freq. 243.950008 [MHz]
Freq.Span 50 [MHz]
[5dB/div]
0
20
40
60
80
100
218.95 243.95 268.95
Japan Radio Co.,Ltd
NSVS1100
Group Delay
Frequency[MHz]
[ns] 0
1000
2000
3000
4000
5000
243.45 243.95 244.45
Japan Radio Co.,Ltd
NSVS1100
