F-219 FTM-125-02-L-DV FTMH-116-02-L-DV-P 10 YEAR MFG WITH 30 " GOLD FTMH-111-02-F-DV-ES-A EXTENDED LIFE PRODUCT HIGH MATING CYCLES (1.00 mm) .0394" SMT MICRO TERMINAL STRIPS Mates with: CLM, MLE SPECIFICATIONS Optional pick & place pads For complete specifications and recommended PCB layouts see www.samtec.com?FTMH or www.samtec.com?FTM Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Current Rating (FTMH/CLM): 2.8 A per pin (2 pins powered) Operating Temp Range: -55 C to +125 C Plating: Sn or Au over 50 " (1.27 m) Ni RoHS Compliant: Yes Low profile (1.79 mm) .071" Surface mount PROCESSING Lead-Free Solderable: Yes -DV Lead Coplanarity: (0.10 mm) .004" max -DH Lead Coplanarity: (0.10 mm) .004" max (05-25) (0.15 mm) .006" max (26-50)* *(.004" stencil solution may be available; contact IPG@samtec.com) TYPE STRIP FTMH RECOGNITIONS = SMT Micro -L -03 = 02 thru 50 (unshrouded) = 05 thru 46 (shrouded) = Micro Low Profile FILE NO. E111594 = Gold flash on post, Matte Tin on tail = (1.91 mm) .075" Post (Mates with MLE) FTM FTM -F -02 = 05 thru 50 FTMH For complete scope of recognitions see www.samtec.com/quality PLATING OPTION LEAD STYLE NO. PINS PER ROW 1 = (1.65 mm) .065" Post (Mates with CLM) = 10 " (0.25 m) Gold on post, Matte Tin on tail FTMH ALSO AVAILABLE (MOQ Required) * End shrouds with board locks * Molded end shrouds for 05 through 08 positions * Other platings 02 No. of positions x (1.00) .03937 100 OPTION B - ES (1.57) .062 (4.06) .160 (5.49) .216 - EC (3.17) .125 - EP 01 FTMH 99 (1.91) .075 DIA (3.84) .151 FTMH No. of positions x (1.00) .03937 + B LEAD STYLE A - 02 (1.91) .075 (1.65) .065 - 03 (1.00) .03937 (0.30) .012 SQ TYP (3.10) .122 (4.32) .170 (1.22) .048 -ES OPTION - EP OPTION -EC OPTION A (3.18) .125 X (5.08) .200 (5.00) .197 A (1.49) .059 Note: Some sizes, styles and options are non-standard, non-returnable. Shrouded option removed for clarity (5.21) .205 (1.80) .071 -DV OPTION (0.69) .027 (2.59) .102 -DH OPTION (0.64) .025 DIA -A OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply. (3.18) .125 -P OPTION FTMH-128-03-L-DV-EP FTMH-122-02-F-DV-EC FTMH-135-02-F-DH FTMH-120-02-L-DV FTM-125-02-L-DV FTMH, FTM SERIES Low profile (1.27 mm) .050" Surface mount Shrouded and alignment pin options available Flex Shroud options available ROW OPTION -DV (FTMH-DV only with 9 pins/row minimum) -DH = End Shroud = Dual Vertical -S -EC -EP 50 (3.18) .125 (5.21) .205 46 OPTION C -S (7.00) .276 (4.00) .157 - SA (3.23) (4.44) .127 .175 01 (0.97) .038 = End Shroud with Alignment Pins (05 through 46 positions) FTM No. of positions x (1.00) .03937 + C 02 -K = (2.50 mm) .098" DIA Polyimide Film Pick & Place Pad (FTMH-DH only) -SA = End Shroud with Guide Post (Use only when mating with CLM) 49 FTM = Alignment Pin (3 positions minimum) Metal or plastic at Samtec discretion (FTMH-DV only) = End Shroud (05 positions minimum). Molded or press-fit shroud at Samtec's discretion (See assembly print at www.samtec.com?FTM for dimensions) = End Shroud with Locking Clip (Manual placement required) 02 -A (FTM only) -ES = Dual Horizontal (FTMH only) 01 OTHER OPTIONS FLEX SHROUD OPTIONS -P = Plastic Pick & Place Pad (-DV only) (6 positions minimum FTMH) (7 positions minimum FTM) -TR FTM = Tape & Reel LEAD STYLE D - 02 (1.91) .075 (1.65) .065 - 03 (2.54) .100 x (5.08) .200 45 (0.30) .012 SQ TYP D No of positions x (1.00) .03937 (1.27) .050 -DV OPTION Shrouded options removed for clarity (1.40) (3.56) .055 .140 (1.00) .039 DIA (3.56) .140 -S OPTION (3.18) .125 -P OPTION (1.50) .059 -SA OPTION Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.