LP150 series Low profile trackball Distinctive features and specifications 1.5" ball diameter Panel mount design Available in black or backlit illumination Several protocol options Additional button strips available Environmental Protection Classification (IP Rating): contact factory CONFIGURATION OPTIONS MECHANICAL * * * * * * * LED backlighting: Red, Blue, Green or Clear through a translucent Thermostat resin ball * Additional pushbutton switch: Two, three or four* buttons (* USB only) - see Button Strips * Connector cables * Conformally coated PCB Ball Diameter: 1.50" (38.10mm) Ball Rotation: Continuous in all directions Tracking Force: 10g (0.35oz) Weight: 118.5.5g (4.18oz) Life Cycle (ball rotations): 5 million Operating Temperature: -40C to +85C (-40F to +185F) PROTOCOL OPTIONS AND ELECTRICAL SPECIFICATIONS * USB: MOUNTING OPTIONS Input: 4.00V - 5.25V @ 25mA max (+30mA for backlit illumination option) Output: USB 1.1 * 180 horizontal to 90 vertical - please specify when ordering. * PS/2 (2/3BTN PS/2): Input: 5.00V @ 25mA max (+30mA for backlit illumination option) Output: CMOS/TTL * Microsoft Serial*:Input:DTR/RTS @ 14 mA max (+30mA for backlit illumination option) Output: RS-232, Serial * Quadrature: Input: 5.00V @ 30mA max (+30mA for backlit illumination option) Output: Quadrature Waveforms * Sun Workstation: Input: 5.00V @ 30mA max (Mouse Systems Serial) (+30mA for backlit illumination option) Output: CMOS/TTL NOTE: * = Microsoft Serial Interface requires a 5V supply for the LED backlighting option. All values are nominal. LP SERIES PROTOCOL FORMAT MODEL 150 1.50" Diameter (38.1mm) 1 3 5 6 7 MOUNTING POSITION Microsoft (2 btn Serial) PS/2 (2/3 btn) F - Level to 45 Quadrature N - Level to 90 SUN Workstations X - N/A USB RESOLUTION 10 - 120 resolution 20 - 240 resolution 30 - 480 resolution POWER REQUIREMENT V00 5V Regulated R00 RS-232* (DTR & RTS) *Microsoft Protocol only Note: The company reserves the right to change specifications without notice. APEM www.apem.com ILLUMINATION R B G C Red Blue Green Clear Black* *Non-illuminated LP150 series Low profile trackball MOUNTING CUTOUT DIMENSIONS 88.90 (3.50) 61.98 (2.44) 26.67 (1.05) - Without rubber gasket - With rubber gasket Mounting Hardware: - Two #4-40x7/8 Phl Flat Screws - Two Self Clinching Standoffs 26.67 (1.05) 61.98 (2.44) 26.67 (1.05) 43.69 (1.72) 45.47 (1.79) 53.34 (2.10) 29.21 (1.15) 73.15 (2.88) O4.57 (0.18) 26.67 (1.05) O4.57 (0.18) 43.69 (1.72) X4 36.32 (1.43) 32.00 (1.26) O38.10 (1.50) 43.69 (1.72) 61.98 (2.44) 43.69 (1.72) 36.32 (1.43) 32.00 (1.26) 29.21 (1.15) 1.27 (0.05) 26.92 (1.06) 24.13 (0.95) 53.34 (2.10) 38.10 (1.50) 2.54 (0.10) 88.90 (3.50) BUTTON STRIP FEATURES * Two, three, or four* (*USB only) buttons * Tactile feedback * Normally open momentary contact switch * 5 million lifecycles rating at 500mA at 12VDC * Black or gray button caps * Choice of convex or concave design 37.08 (1.46) 20.32 (0.80) #4-40 Screw, Nut & Washer (2 Places) 7.62 (0.30) + 15.24 (0.60) + 13.97 (0.55) 15.24 (0.60) 16.76 (0.66) 50.80 (2.00) 61.21 (2.41) Panel + + + 8.38 (0.33) 64.77 (2.55) 73.66 (2.90) Panel O13.97 (0.55) 16.00 (0.63) White Grey Green (Common) #4-40 Screw, Nut & Washer (2 Places) 18.54 (0.73) H For Convex Buttons H = 20.32/(0.80) For Concave Buttons H = 19.30/(0.76) White Grey Black Green (Common) NOTE: All dimensions are in mm/(inch). Note: The company reserves the right to change specifications without notice. LP150_JOYST1412R1US www.apem.com APEM