DSP 8 VRRM = 800/1200 V IF(RMS) = 2x17 A IF(AV)M = 2x11 A Phase-leg Rectifier Diode VRSM VRRM V V Type 900 800 DSP 8-08A 1300 1200 TO-220 AB DSP 8-12A TO-263 AA 1 TO-263AB TAB 3 TO-220 AB 1 2 3 DSP 8-08AS DSP 8-08S DSP 8-12AS DSP 8-12S TO-263 AA 1 2 (TAB) 2 3 2 (TAB) TO-263 AB TAB 1 3 1 = Cathode, 2 = Anode/Cathode, 3 = Anode TAB = Anode/Cathode Symbol Conditions IFRMS IF(AV)M TVJ = TVJM Tcase = 100C; 180 sine IFSM TVJ = 45C; I 2t Maximum Ratings A A t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 100 110 A A TVJ = 150C; t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 90 100 A A TVJ = 45C; t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 50 50 A 2s A 2s TVJ = 150C; t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine 41 42 A 2s A 2s -40...+180 180 -40...+150 C C C 0.4...0.6 Nm 2/4 g TVJ TVJM Tstg Md 1) 17 11 Mounting torque Weight TO-263/TO-220 Symbol Conditions IR TVJ = 25C VF IF = 7 A; TVJ = 25C VT0 rT For power-loss calculations only TVJ = TVJM RthJC RthCH 1) DC current DC current (with heatsink compound) a Maximum allowable acceleration Features * International standard packages JEDEC TO-220 AB and TO-263 AA surface mountable * For single and three phase bridge configuration * Planar passivated chips * Epoxy meets UL 94V-0 flammability classification Characteristic Values VR = VRRM 5 A 1.15 V 0.8 40 V m 3.5 0.5 K/W K/W 100 m/s2 typ. 1) 427 TO-220 only Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions 1-3 (c) 2004 IXYS All rights reserved http://store.iiic.cc/ DSP 8 TO-220 AB Outline Dim. A B C D E F G H J K M N Q R Millimeter Min. Max. 12.70 13.97 14.73 16.00 9.91 10.66 3.54 4.08 5.85 6.85 2.54 3.18 1.15 1.65 2.79 5.84 0.64 1.01 2.54 BSC 4.32 4.82 1.14 1.39 0.38 0.56 2.29 2.79 Inches Min. Max. 0.500 0.550 0.580 0.630 0.390 0.420 0.139 0.161 0.230 0.270 0.100 0.125 0.045 0.065 0.110 0.230 0.025 0.040 0.100 BSC 0.170 0.190 0.045 0.055 0.015 0.022 0.090 0.110 Millimeter Min. Max. 4.06 4.83 2.03 2.79 0.51 0.99 1.14 1.40 0.46 0.74 1.14 1.40 8.64 9.65 7.11 8.13 9.65 10.29 6.86 8.13 2.54 BSC 14.61 15.88 2.29 2.79 1.02 1.68 0 0.38 0.46 0.74 Inches Min. Max. .160 .190 .080 .110 .020 .039 .045 .055 .018 .029 .045 .055 .340 .380 .280 .320 .380 .405 .270 .320 .100 BSC .575 .625 .090 .110 .040 .066 0 .015 .018 .029 TO-263 AA Outline Dim. A A1 b b2 c c2 D D1 E E1 e L L1 L2 L4 R TO-263 AB Outline Millimeter Min. Max. Inches Min. Max. A A1 4.06 2.03 4.83 2.79 .160 .080 .190 .110 b b2 0.51 1.14 0.99 1.40 .020 .045 .039 .055 c c2 0.46 1.14 0.74 1.40 .018 .045 .029 .055 D D1 8.64 8.00 9.65 8.89 .340 .315 .380 .350 E E1 e 9.65 10.29 6.22 8.13 2.54 BSC .380 .405 .245 .320 .100 BSC L L1 L2 L3 L4 14.61 2.29 1.02 1.27 0 15.88 2.79 1.68 1.78 0.20 .575 .090 .040 .050 0 .625 .110 .066 .070 .008 R 0.46 0.74 .018 .029 427 1.Gate 2.Collector 3.Emitter 4.Collector Botton Side Dim. IXYS reserves the right to change limits, test conditions and dimensions 2-3 (c) 2004 IXYS All rights reserved http://store.iiic.cc/ DSP 8 150 25 A TVJ = 180C TVJ = 25C 102 50 Hz, 80% VRRM 20 2 It IFSM IF VR = 0 V A2s A 100 TVJ = 45C 15 TVJ = 45C 10 TVJ = 150C 50 TVJ = 150C 5 0 0.0 0.5 1.0 1.5 VF 0 0.001 2.0 V 2.5 101 0.01 0.1 1 s 1 2 3 t Fig. 1 Forward current versus voltage drop per diode 4 5 6 7 ms 8 910 t Fig. 3 I2t versus time per diode Fig. 2 Surge overload current 20 15 W RthJA: 15 3 5 8 12 20 50 Ptot 10 A 12 K/W K/W K/W K/W K/W K/W Id(AV)M 9 6 5 3 0 0 0 3 6 9 A 0 30 60 90 120 150 C 180 0 40 80 Tamb Id(AV)M Fig. 4 Power dissipation versus direct output current and ambient temperature, sine 180 120 160 TC C Fig. 5 Max. forward current versus case temperature 4 K/W 3 2 Constants for ZthJC calculation: i 1 0 0.0001 DSP 8 0.001 0.01 0.1 1 s 1 2 3 4 Rthi (K/W) ti (s) 0.252 1.045 1.932 0.271 0.002 0.032 0.227 1.2 10 Fig. 6 Transient thermal impedance junction to case 427 t IXYS reserves the right to change limits, test conditions and dimensions 3-3 (c) 2004 IXYS All rights reserved http://store.iiic.cc/