DSS 25-0045A IFAV = 25 A VRRM = 45 V VF = 0.58 V Power Schottky Rectifier VRSM VRRM V V 45 45 Type A C TO-220 AC C A DSS 25-0045A C (TAB) A = Anode, C = Cathode , TAB = Cathode Symbol Conditions Maximum Ratings IFRMS IFAV TC = 155C; rectangular, d = 0.5 IFSM TVJ = 45C; tp = 10 ms (50 Hz), sine EAS IAR 35 25 A A 400 A IAS = 18 A; L = 180 H; TVJ = 25C; non repetitive 46 mJ VA =1.5*VRRM typ.; f = 10 kHz; repetitive 1.8 A 1000 V/s -55...+175 175 -55...+150 C C C 135 W 0.4...0.6 Nm 2 g (dv/dt)cr TVJ TVJM Tstg Ptot TC = 25C Md mounting torque Weight typical Symbol Conditions Characteristic Values typ. max. IR VR = VRRM; TVJ = 25C VR = VRRM; TVJ = 125C VF IF = 25 A; IF = 25 A; IF = 50 A; TVJ = 125C TVJ = 25C TVJ = 125C RthJC RthCH 0.5 1 10 mA mA 0.58 0.69 0.71 V V V 1.1 K/W K/W Features * International standard package * Very low VF * Extremely low switching losses * Low IRM-values * Epoxy meets UL 94V-0 Applications * Rectifiers in switch mode power supplies (SMPS) * Free wheeling diode in low voltage converters Advantages * High reliability circuit operation * Low voltage peaks for reduced protection circuits * Low noise switching * Low losses Dimensions see Outlines.pdf IXYS reserves the right to change limits, Conditions and dimensions. (c) 2006 IXYS All rights reserved 0623 Pulse test: Pulse Width = 5 ms, Duty Cycle < 2.0% Data according to IEC 60747 and per diode unless otherwise specified. 1-2 DSS 25-0045A 100 10000 100 mA A pF TVJ=175C IR IF 10 CT 150C 1 125C 10 1000 100C 0.1 TVJ = 175C 150C 125C 25C 75C 50C 0.01 25C 1 0.0 0.2 0.4 0.6 0.8 V 1.0 0 10 20 30 0 40 V 50 VR VF Fig. 1 Maximum forward voltage drop characteristics TVJ= 25C 100 0.001 Fig. 2 Typ. value of reverse current IR versus reverse voltage VR 10 20 30 VR 40 V Fig. 3 Typ. junction capacitance CT versus reverse voltage VR 25 W 40 A 35 20 30 IF(AV) d=0.5 DC 25 A P(AV) IFSM d= DC 0.5 0.33 0.25 0.17 0.08 15 20 10 15 10 5 5 0 0 0 40 80 120 TC 160C Fig. 4 Average forward current IF(AV) versus case temperature TC 1 K/W ZthJC 0 5 10 15 20 25 30 35 A IF(AV) s tP Fig. 5 Forward power loss characteristics D=0.5 0.33 0.25 0.17 0.1 0.08 Single Pulse (Thermal Resistance) 0.01 0.0001 DSS 25-0045A 0.001 0.01 0.1 s 1 10 t IXYS reserves the right to change limits, Conditions and dimensions. (c) 2006 IXYS All rights reserved Note: All curves are per diode 0623 Fig. 6 Transient thermal impedance junction to case at various duty cycles 2-2