T-51639D084JU-FW-A-AB - Optrex Corporation

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 1/36

LCD Module Technical Specification

T-51639D084JU-FW-A-AB

No. Item Page

-- CONTENTS 1

1 APPLICATION 2

2 OVERVIEW 3

3 ABSOLUTE MAXIMUM RATINGS 4

4 ELECTRICAL CHARACTERISTICS 4

5 INTERFACE PIN CONNECTION 7

6 INTERFACE TIMING 9

7 BLOCK DIAGRAM 14

8 MECHANICAL SPECIFICATION 15

9 OPTICAL CHARACTERISTICS 17

10 RELIABILITY TEST CONDITION 19

11 INSPECTION STANDARDS 20

12 HANDLING PRECAUTIONS FOR TFT-LCD MODULE 21

-- PACKAGING SPECIFICATION 24

-- PRODUCTS NUMBER LABELING FORMS 28

-- LAMP UNIT FOR 8.4” XGA 30

Type No.

Jan 17, 2005

First Edition

Final Revision

******

Checked b

(

ACI En

ineerin

Division

)

Approved b

(

Qualit

Assurance Division

)

Prepared by

(ACI

Engineering Div

ision)

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 2/36

1. APPLICATION

This specification applies to color TFT-LCD module, T-51693D084JU-FW-A-AB.

These specification papers are the proprietary product of OPTREX and include materials protected

under copyright of OPTREX. No part of this document may be reproduced in any form or by any

means without the express written permission of OPTREX.

OPTREX does not assume any liability for infringement of patents, copyrights or other intellectual

property rights of third parties by or arising from use of a product specified in this document. No

license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual

property rights of OPTREX or of others.

OPTREX classifies the usage of the TFT-LCD module as follows. Please confirm the usage before

using the product.

(1) Standard Usage

Computers, office equipment, factory automation equipment, test and measurement

equipment, communications, transportation equipment(automobiles, ships, trains, etc.),

provided, however, that operation is not influenced by TFT-LCD directly.

(2) Special Usage

Medical equipment, safety equipment, transportation equipment, provided, however, that

TFT-LCD is necessary to its operation.

(3) Specific Usage

Cockpit Equipment, military systems, aerospace equipment, nuclear reactor control

systems, life support systems and any other equipment. OPTREX should make a contract

that stipulate apportionment of responsibilities between OPTREX and our customer.

The product specified in this document is designed for “Standard Usage” unless otherwise specified in

this document. If customers intend to use the product for applications other than those specified for

“Standard Usage”, they should contact OPTREX sales representative in advance.

OPTREX has been making continuous effort to improve the reliability of its products. Customers

should implement sufficient reliability design of their application equipments such as redundant

system design, fail-safe functions, anti-failure features.

OPTREX assumes no responsibility for any damage resulting from the use of the product that does

not comply with the instructions and the precautions specified in this document.

Please contact and consult a OPTREX sales representative for any questions regarding this product.

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 3/36

2. OVERVIEW

T-51639D084JU-FW-A-AB is 8.4” color TFT-LCD (Thin Film Transistor Liquid Crystal Display)

module composed of LCD panel, driver ICs, control circuit, and backlight unit.

By applying 6 bit or 8 bit digital data, 1024 × 768, 260K-color or 16.7M-color images are displayed on

the 8.4” diagonal screen. Input power voltage is 3.3 V for LCD driving.

The type of data and control signals are digital and transmitted via LVDS interface per Typ. 65 MHz

clock cycle.

Inverter for backlight is not included in this module. General specifications are summarized in the

following table:

ITEM SPECIFICATION

Display Area (mm) 171.264(H) × 128.448 (V)

(8.4-inch diagonal)

Number of Dots 1024 × 3 (H) × 768 (V)

Pixel Pitch (mm) 0.16725 (H) × 0.16725 (V)

Color Pixel Arrangement RGB vertical stripe

Display Mode Normally white TN

Number of Color 260K(6 bit/color)16.7M(8 bit/color)

Brightness (cd/m2) 300

Wide Viewing Angle Technology Optical Compensation Film

Viewing Angle (CR ≥ 10) -65~65° (H) -50~60° (V)

Surface Treatment Anti-glare and hard-coating 3H

Electrical Interface LVDS(6 bit/8 bit)

Optimum Viewing Angle (Contrast ratio) 12 o’clock

Module Size (mm) 205.0 (W) × 152.4 (H) × 11.3 (D)

Module Mass (g) 380

Backlight Unit CCFL, 2-tubes, edge-light, replaceable

Characteristic value without any note is typical value.

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 4/36

3. ABSOLUTE MAXIMUM RATINGS

ITEM SYMBOL MIN. MAX. UNIT

Power Supply Voltage for LCD VCC 0 4.0 V

Logic Input Voltage VI −0.3 VCC+0.3 V

Lamp Voltage VL 0 2,000 Vrms

Lamp Current IL 0 15 mArms

Lamp Frequency FL 30 60 kHz

Operation Temperature (Panel) Note 1,2) Top(Panel) −20 70 °C

Operation Temperature (Ambient) Note 2) Top(Ambient) −20 70 °C

Storage Temperature Note 2) Tstg −20 80 °C

[Note]

1) Measured at the center of active area and at the center of panel back surface

2) Top,Tstg ≤ 40°C : 90%RH max. without condensation

Top,Tstg > 40°C : Absolute humidity shall be less than the value of 90%RH at 40°C without

condensation.

4. ELECTRICAL CHARACTERISTICS

(1) TFT- LCD Ambient Temperature: Ta = 25°C

ITEM SYMBOL MIN. TYP. MAX. UNIT Remarks

Power Supply Voltage for LCD VCC 3.0 3.3 3.6 V *1)

Power Supply Current for LCD ICC -- 370 550 mA *2)

Permissive Input Ripple Voltage VRP -- -- 100 mVp-p VCC = +3.3V

*1) Power and signals sequence:

t1 ≤ 10ms 200ms ≤ t5

0 < t2 ≤ 50ms 200ms ≤ t6

0 < t3 ≤ 50ms 0 ≤ t7

t4 ≤ 10ms

t1 t2 t3

data 0.9VCC

0.9VCC

0.1VCC

VCC

t4 t5

t6 t7

data: RGB DATA, DCLK, HD, VD, DENA, SC

0.1VCC 0.1VCC

LCD Power Supply

ic Si

nal

Backlight Power Supp ly

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 5/36

VCC-dip conditions:

1) When 2.6 V ≤ VCC < 3.0 V, td ≤ 10 ms

2) When VCC < 2.6 V

VCC-dip conditions shall also follow the po we r and signals sequence.

2.6 V

3.0 V

VCC

*2) Current condition:

64-gray-bar-pattern(6 bit)

256-gray-bar-pattern(8 bit)

768 line mode

VCC = +3.3 V, fH = 48.4 kHz, fV = 60 Hz, fCLK = 65 MHz

(2) Backlight Ta = 25°C

ITEM SYMBOL MIN. TYP. MAX. UNIT Remarks

Lamp Voltage VL -- 450 -- Vrms IL = 6.0 mArms

Lamp Current IL 3.0 6.0 6.5 mArms *1), *5)

Lamp Frequency FL 30 -- 60 kHz *2)

750 -- -- Vrms Ta = 25°C

1125 -- -- Vrms Ta = 0°C Starting Lamp Voltage VS 1440 -- -- Vrms Ta = −20°C

Lamp Life Time LT 50,000 -- -- h *3), *4), IL = 6.0 mArms

Continuous Operation

*1) Lamp Current measurement method (The current meter is inserted in low voltage line.)

CTL

CTH

CTL

CTH

LCD

Module

Inverter Power

Supply

*2) Lamp frequency of inverter may produce interference with horizontal synchronous frequency, and

this may cause horizontal beat on the display. Therefore, please adjust lamp frequency, and keep

inverter as far from module as possible or use electronic shielding between inverter and module to

avoid the interference.

*3) Lamp life time is defined as the time either when the brightness becomes 50% of the initial value, or

when the starting lamp voltage does not meet the value specified in this table.

*4) The life time of the backlight depends on the ambient temperature. The life time will decrease under

low/high temperature.

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 6/36

*5) Please use the inverter which has symmetrical current wave form as follows,

The degree of unbalance: less than 10%

The ratio of wave height: less than 2±10%

IPH

IPL

IPH: High side peak

IPL: Low side peak

The d egree of unbalance = |IPH - IPL| / Irm s × 100(%)

The rat io of wave height = IPH(or IPL) / Irms

CURRENT WAVE FORM

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 7/36

5. INTERFACE PIN CONNECTION

(1) CN 1(Interface Signal)

Used connector: FI-SEB20P-HFE(JAE)

Corresponding connector: FI-S20S[for discrete wire], FI-SE20M[for SMT]

Function (ISP 6 bit compatibility mode)

No. Symbol 6 bit input 8 bit input Function (ISP 8 bit

compatibility mode)

1 VCC +3.3 V Power supply ←

2 VCC +3.3 V Power supply ←

3GND GND ←

4GND GND ←

5 Link 0- R0, R1, R2, R3, R4, R5, G0 R2, R3, R4, R5, R6, R7, G2 R0, R1, R2, R3, R4, R5, G0

6 Link 0+ R0, R1, R2, R3, R4, R5, G0 R2, R3, R4, R5, R6, R7, G2 R0, R1, R2, R3, R4, R5, G0

7GND GND ←

8 Link 1- G1, G2, G3, G4, G5, B0, B1 G3, G4, G5, G6, G7, B2, B3 G1, G2, G3, G4, G5, B0, B1

9 Link 1+ G1, G2, G3, G4, G5, B0, B1 G3, G4, G5, G6, G7, B2, B3 G1, G2, G3, G4, G5, B0, B1

10 GND GND ←

11 Link 2- B2, B3, B4, B5, HD, VD,

DENA B4, B5, B6, B7, HD, VD,

DENA B2, B3, B4, B5, HD, VD,

DENA

12 Link 2+ B2, B3, B4, B5, HD, VD,

DENA B4, B5, B6, B7, HD, VD,

DENA B2, B3, B4, B5, HD, VD,

DENA

13 GND GND ←

14 CLKIN- Clock −←

15 CLKIN+ Clock + ←

16 GND GND ←

17 Link3- See: *2) R0, R1, G0, G1, B0, B1 R6, R7, G6, G7, B6, B7

18 Link3+ See: *2) R0, R1, G0, G1, B0, B1 R6, R7, G6, G7, B6, B7

19 MODE Low=ISP 6 bit compatibility mode High=ISP

8 bit compatibility mode

20 SC Scan direction Control. Low = Normal, High = Reverse ←

*1) The shielding case is connected with GND

*2) Recommended wiring of Pin 17,18 (6 bit input)

LOW data

LVDS

transmitter 680Ω

620Ω

Pin 17

Pin 18 Pin 17

Pin 18

VCC

(2) CN 2,3 (Backlight)

Used connector: BHR-02(8.0)VS-1N(JST)

Corresponding connector: SM02(8.0)B-BHS(JST)

Pin No. Symbol Function

1CTH

VBLH（High Voltage）

2CTL

VBLL（Low Voltage）

[Note]

VBLH-VBLL = VL

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 8/36

(3) ISP data mapping

a. ISP 6 bit compatibility mode( 6 bit input)

CLKIN+/-

Link0+/-

1CLK

Link1+/-

Link2+/-

G0 R5 R4 R3 R2 R0

B1 B0 G5 G4 G3 G1

DENA VD HD B5 B4 B2

CLKIN+/-

Link0+/-

1CLK

Link1+/-

Link2+/-

Link3+/-

G2 R7 R6 R5 R4 R2

B3 B2 G7 G6 G5 G3

DENA VD HD B7 B6 B4

B1 B0 G1 G0 R0

b. ISP 6 bit compatibi lity mode(8 bit input)

CLKIN+/-

Link0+/-

1CLK

Link1+/-

Link2+/-

Link3+/-

R1G0 R5 R4 R3 R2 R0

G2B1 B0 G5 G4 G3 G1

B3DENA VD HD B5 B4 B2

R7B7 B6 G7 G6 R6

c. ISP 8 bit compatibility mode

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 9/36

6. INTERFACE TIMING

LVDS transmitter input signal

(1)Timing Specifications

ITEM SYMBOL MIN. TYP. MAX. UNIT

Frequency fCLK 43.6 65 80 MHz

DCLK Period tCLK 12.5 15.4 22.9 ns

Horizontal Active Time tHA 1024 1024 1024 tCLK

Horizontal Front Porch tHFP 024--t

CLK

Horizontal Back Porch tHBP 4 296 -- tCLK

Vertical Active Time tVA 768 768 768 tH

DENA

Vertical Front Porch tVFP 23--t

Vertical Back Porch tVBP 135-- t

Frequency fH42.4 48.4 60 kHz

Period tH16.6 20.7 23.6 µs

Low Width tWHL 1 136 -- tCLK

Frequency fV55 60 75 Hz

Period tV13.3 16.7 18.2 msVD

Low Width tWVL 16--t

[Note]

1) Polarities of HD and VD are negative in this specification.

2) DENA (Data Enable) shall always be positive polarity as shown in the timing specification.

3) DCLK shall appear during all invalid period, and HD shall appear during invalid period of

frame cycle.

4) LVDS timing follows the timing specifications of LVDS receiver IC: THC63LVDF84B(Thine).

5) 20 ≤ tHFP + tHBP < 512

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 10/36

(2) Timing Chart

a. Horizontal Timing Chart

DCLK

DATA

(R,G,B) 12 1023 10243

Invalid Data Invalid Data

tHA

tHFP tHBP

tWHL

tH=1/fH

First Data Last Data

DENA

12 7677683

Invalid Data Invalid Data

tWVL

tVFP tVBP

=1/f

LINE DATA

DENA

b. Vertical Timing Chart

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 11/36

(3) Color Data Assignment

a. 6 bit input INPUT DATA

R DATA G DATA B DATA

R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0

COLOR

MSBLSBMSBLSBMSBLSB

BLACK 000000000000000000

RED(63) 111111000000000000

GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0

BLUE(63) 000000000000111111

CYAN 000000111111111111

MAGENTA111111000000111111

YELLOW 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0

BASIC

COLOR

WHITE 111111111111111111

RED(1) 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0

RED(2) 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0

RED(62) 111110000000000000

RED

RED(63) 111111000000000000

GREEN(1) 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0

GREEN(2) 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0

GREEN(62) 0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0

GREEN

GREEN(63) 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0

BLUE(1) 000000000000000001

BLUE(2) 000000000000000010

BLUE(62) 000000000000111110

BLUE

BLUE(63) 000000000000111111

[Note]1) Definition of gray scale

Color (n) ---n indicates gray scale level.

Higher n means brighter level.

2) Data 1:High, 0: Low

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 12/36

b. 8 bit input INPUT DATA

R DATA G DATA B DATA

R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0

COLOR

MSB LSB MSB LSB MSB LSB

BLACK 0 000000 0 0 000000 0 0 000000 0

RED(255) 1 111111 1 0 000000 0 0 000000 0

GREEN(255) 0 000000 0 1 111111 1 0 000000 0

BLUE(255) 0 000000 0 0 000000 0 1 111111 1

CYAN 0 000000 0 1 111111 1 1 111111 1

MAGENTA 1 111111 1 0 000000 0 1 111111 1

YELLOW 1 111111 1 1 111111 1 0 000000 0

BASIC

COLOR

WHITE 1 111111 1 1 111111 1 1 111111 1

RED(1) 0 000000 1 0 000000 0 0 000000 0

RED(2) 0 000001 0 0 000000 0 0 000000 0

RED

RED(255) 1 111111 1 0 000000 0 0 000000 0

GREEN(1) 0 000000 0 0 000000 1 0 000000 0

GREEN(2) 0 000000 0 0 000001 0 0 000000 0

GREEN

GREEN(255) 0 000000 0 1 111111 1 0 000000 0

BLUE(1) 0 000000 0 0 000000 0 0 000000 1

BLUE(2) 0 000000 0 0 000000 0 0 000001 0

BLUE

BLUE(255) 0 000000 0 0 000000 0 1 111111 1

[Note]1) Definition of gray scale

Color (n) --- n indicates gray scale level.

Higher n means brighter level.

2) Data

1:High, 0: Low

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 13/36

(4) Display Position and Scan Direction

D(X,Y) shows the data number of input signal for LCD panel signal processing PCB.

SC: Low SC: High

D(1,1) D(1024,1)

D(1,768) D(1024,768) CN3

D(1024,768) D(1,768)

D(1024,1) D(1,1) CN3

CN2 CN2

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 14/36

7. BLOCK DIAGRAM

S3072

S3071

I/F Connec tor CN1

Timing Converter

Drivers(source)

TFT-LCD

Drivers(gate)

Power

Supply

Circuit

BACKLIGHT

CCFL

CN2,3

G768

Timi ng signal

Display data

Power

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 15/36

8. MECHANICAL SPECIFICATIONS

(1) Front Side

Unit:mm

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 16/36

(2) Rear Side

Unit:mm

[Note]

We recommend you referring to the detailed drawing for your design.

Please contact our company sales representative when you need the detailed drawing.

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 17/36

9. OPTICAL CHARACTERISTICS

Ta = 25°C, VCC = 3.3 V, Input Signals: Typ. Values shown in Section 6

ITEM SYMBOL CONDITION MIN. TYP. MAX. UNIT Remarks

Contrast Ratio CR θ = φ = 0° 300 400 -- -- *1)*2)*6)

Luminance Lw θ = φ = 0° 250 300 -- cd/m2*1)*3)*6)

Luminance Uniformity ∆Lw θ = φ = 0° -- -- 30 % *1)*4)*6)

tr θ = φ = 0° -- 6 -- ms *1)*5)*6)

Response Time tf θ = φ = 0° -- 19 -- ms *1)*5)*6)

Horizontal φ-55∼55 -65∼65 -- ° *1)*6)

Vertical θCR ≥ 10 -40∼50 -50∼60 -- ° *1)*6)

Horizontal φ-70∼70 -80∼80 -- ° *1)*6)

Viewing

Angle Vertical θCR ≥ 5-60∼70 -70∼80 -- ° *1)*6)

Image Sticking tis 2 h -- -- 2 s *7)

Red Rx 0.539 0.569 0.599

Ry 0.297 0.327 0.357

Green Gx 0.287 0.317 0.347

Gy 0.490 0.520 0.550

Blue Bx 0.125 0.155 0.185

By 0.118 0.148 0.178

White Wx 0.283 0.313 0.343

Color

Coordinates

θ = φ = 0°

0.299 0.329 0.359

-- *1)*6)

[Note]

These items are measured using CS1000(MINOLTA) for color coordinates, EZContrast(ELDIM) for

viewing angle, and CS1000 or BM-5A(TOPCON) for others under the dark room condition (no ambient

light) after more than 30 minutes from turning on the lamp unless noted.

Condition: IL = 6.0 mArms, FL = 55 kHz

*1) Measurement Point

Contrast Ratio, Luminance, Response Time, Vie wing Angle, Color Coordinates: Display Center

Luminance Uniformity: point 1∼5 shown in a figure below

(1,1) 256 512 768

192

384

576

(1024,768)

*2) Definition of Contrast Ratio

CR=ON (White) Luminance / OFF(Black) Luminance

*3) Definition of Luminance

Lw= ON (White) Luminance

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 18/36

*4) Definition of Luminance Uniformity

∆Lw=[Lw(MAX)/Lw(MIN)-1] × 100

*5) Definition of Response Time

White

90%90%

10%10% Black tf

Luminance

*6) Definition of Viewing Angle( θ , φ)

*7) Image Sticking

Continuously display the test pattern shown in the figure below for two-hours. Then display a

completely white screen. The previous image shall not persist more than two seconds at 25°C.

Black

Lines

White

Area

Cols 510-514

Rows 382-386

TEST PATTERN FOR IMAGE STICKING TEST

T-51639D084JU-FW-A-AB (AB) No. 2005-0004 OPTREX CORPORATION Page 19/36

10. RELIABILITY TEST CONDITION

(1) Temperature and Humidity

TEST ITEM CONDITIONS

HIGH TEMPERATURE

HIGH HUMIDITY OPERATION 40°C, 90% RH, 240h

(No condensation)

HIGH TEMPERATURE STORAGE 80°C, 240 h

LOW TEMPERATURE STORAGE −20°C, 240 h

THERMAL SHOCK (NON- OPERATION) BETWEEN −20°C (1h) and 80°C(1h),

100 CYCLES

(2) Shock & Vibration

ITEM CONDITIONS

SHOCK

(NON-OPERATION)

Shock level: 980 m/s2 (100 G)

Waveform: half sinusoidal wave, 2 ms

Number of shocks: one shock input in each direction of three mutually

Perpendicular axes for a total of six shock inputs

VIBRATION

(NON-OPERATION)

Vibration level: 9.8 m/s2 (1.0 G)

Waveform: sinusoidal

Frequency range: 5 to 500Hz

Frequency sweep rate: 0.5 octave /min

Duration: one sweep from 5 to 500 Hz in each of three mutually

Perpendicular axis(each x,y,z axis: 1 hour, total 3 hours)

(3) Judgment standard

The judgment of the above tests should be made as follow:

Pass: Normal display image, no damage of the display function. (ex. no line defect)

Partial transformation of the module parts should be ignored.

Fail: No display image, damage of the display function. (ex. line defect)