If it‘s Embedded, it‘s Kontron.
For quick evaluation purposes
Fully featured UGM connectors
Rich multimedia interfaces
UGM Evaluation Board
For UGM and COM Express™ modules
www.kontron.com/UGM
UGM Evaluation Board
#UGM Evaluation Board #30102008PDL
All data is for information purposes only and not guaranteed for legal purposes. Subject to change without notice. Information in this datasheet has been carefully checked and is believed to be accurate; however, no responsibilty is assumed for inaccurancies.
All brand or product names are trademarks or registered trademarks of their respective owners. DIMM-PC® and JUMPtec® are registered trademarks of Kontron Embedded Modules GmbH, Germany.
Product Overview
Technical Information
North America
14118 Stowe Drive
Poway, CA 92064-7147
USA
Tel.: +1 888 294 4558
Fax: +1 858 677 0898
sales@us.kontron.com
Europe, Middle East & Africa
Oskar-von-Miller-Str. 1
85386 Eching/Munich
Germany
Tel.: +49 (0)8165/ 77 777
Fax: +49 (0)8165/ 77 219
sales@kontron.com
Hard Disk
1 x 40 pin IDE connector
1 x Compact Flash Socket (vertical)
4 x SATA connectors
Ethernet
1 x Ethernet connector for 10/100/1000 LAN
Legacy interfaces
2 x COM connectors (pin header)
1 x LPT connector (pin header)
USB
4 x USB 2.0
2 x USB 2.0 (pin header)
LVDS and CRT interfaces
from COM Express™ module:
1 x JILI LVDS
1x D-SUB15 CRT
from UGM module:
1x JILI30 LVDS
2x DVI-I
1x TVout (CVBS, S-Video & Component)
PCI
1 x PCI Slot
PCI Express
1 x PCI Express x4 in x16 slot
PCI Express Card
1 x PCI Express Card slot (optional on backside)
Sound
7.1+2 Channel High Definition Audio Codec
6 jacks on front connector
2 jacks on pin header
1x SPDIF
Form Factor
305mm x 190mm x 38mm
ATX power connectors: 4 pin (12V/wide range) and 20 pin
Temperature (*)
Operating: 0 to +60°C
Storage: -25 to +85°C
Humidity
Operating: 10% to 90% (non condensing)
Non operating: 5% to 95% (non condensing)
The UGM Evaluation Board is designed to allow
embedded application developers to get up and run
quickly with COM Express™ and UGM modules. The
module can be run also with COM Express™ modules
separately. In particular, the evaluation board is for the
use and test of UGM modules, which deliversmaximum
graphic performance. In general, any COM Express™
module can be combined with UGM modules.
It offers well-established and current multimedia
interfaces of any kind. With a complete set of connectors,
it operates as reference design for several customized
variations. Thus, time-to-market is dramatically reduced
and future upgrades are as simple as choosing a new
COM Express™ module.
The UGM Evaluation Board is shipped without COM
Express™ module and without UGM module.
Corporate Offices
Ordering Information
Article Part.-No. Description
UGM Evaluation Board 41100-0000-00-0 Evaluation Board for UGM and COM Express™ modules
UGM-M72 41001-1280-00-0 High End Graphic Module based on ATI M72 with 128 MB RAM
UGM-M72 41001-2560-00-0 High End Graphic Module based on ATI M72 with 256 MB RAM
UGM-M72-COOLER1 41001-0000-99-0 Passive Heatspreader Kit for UGM-M72, all memory versions. Mandatory for the UGM-M72 module.
Kontron Embedded Modules
Brunnwiesenstr. 16
94469 Deggendorf
Germany
Tel.: +49 (0)991/ 370 24-100
Fax: +49 (0)991/ 370 24-333
sales@kontron.com
Asia Pacific
17 Building,Block #1,ABP.
188 Southern West 4th Ring Road
Beijing 100070,P.R.China
Tel.: + 86 10 63751188
Fax: + 86 10 83682438
kcn@kontron.cn
(*) Ask about extended temperature ranges
