5/16"(8.0mm) dia. hole for 3/8 LAG bolts (4) - not supplied.

B) LAG assembled plinth to floor. Assure that plinth is square and accurate.

C) Open or remove doors on base unit (item 2) for ease of assembly. This

will allow for visual alignment of mating parts. Remove .5 dia knockouts

in bottom of base unit.

D) Align base unit over top opening in plinth unit. Side edges o f base unit

and plinth are to be flush.

E) Front and rear holes in the base unit bottom are to be aligned with

mounting holes on plinth top.

F) Once the base unit is seated properly on the plinth remove cover plates on