The MLP’s high-energy storage and box-shape make it perfect for
voltage holdup or ltering in military SEM-E modules, telecom
circuit packs and computer cards. The MLP delivers up to 20 joules
of energy storage in a 1/2” height with 50 year’s life at +45 ºC. You
can readily heatsink it to double the ripple-current capability. The MLP
is the square-peg component that ts the square-holes in electronic
assemblies.
Highlights
- Low-prole replacement for snap-ins
- Double the ripple capability with a heatsink
- Nearly hermetic welded seal assures 50-year life
- Withstands more than 80,000 feet altitude
Specications
Temperature Range –55°C to +85°C ≤250 Vdc
–40°C to +85°C ≥300 Vdc
Rated Voltage Range 7.5 Vdc to 450 Vdc
Capacitance Range 110 µF to 47,000 µF
Capacitance Tolerance ±20%
Leakage Current ≤ 0.002 CV µA, @ 25 °C and 5 min.
Ripple Current Multipliers Ambient Temperature, No Heatsink
Low Temperature Characteristics Impedance ratio: Z–55⁰C ∕ Z+25⁰C
≤ 10 (7.5 - 20 Vdc)
≤ 2 (25 – 250 Vdc)
Impedance ratio: Z–20⁰C ∕ Z+25⁰C
≤ 4 (300–450Vdc)
Endurance Life Test 2000 h @ full load at +85 °C
∆ Capacitance ±10%
ESR 200% of limit
DCL 100% of limit
Shelf Life Test 500 h at 85 °C
Capacitance 100% of limit
ESR 100% of limit
DCL 100% of limit
Vibration All case sizes: 10g.
MIL-STD-202, Meth. 204,Sine Swept, EIEC 60068-2-6
Frequency
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type MLP 85 °C Flatpack, Ultra Long Life, Aluminum Electrolytic
Very Low Prole
45 °C 55 °C 65 °C 75 °C 85 °C
3.79 3.32 2.77 2.08 1.00
45 °C 55 °C 65 °C 75 °C 85 °C
1.00 0.90 0.75 0.56 0.27
50 Hz 60 Hz 120 Hz 360 Hz 1 kHz 5 kHz
10 kHz
& up
7.5 to 63 V 0.94 0.95 1.00 1.04 1.05 1.06 1.06
80 to 450 V 0.80 0.85 1.00 1.17 1.24 1.28 1.29
Case Temperature
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type MLP 85 °C Flatpack, Ultra Long Life, Aluminum Electrolytic
Very Low Prole
Vibration Test Level
The specimens, while deenergized or operating under the load conditions
specied, shall be subjected to the vibration amplitude, frequency range,
and duration specied for each case size.
Amplitude
The specimens shall be subjected to a simple harmonic motion having an
amplitude of either 0.06-inch double amplitude (maximum total excursion)
or peak level specied above (XXg peak), whichever is less. The tolerance
on vibration amplitude shall be ±10 percent.
Frequency Range
The vibration frequency shall be varied logarithmically between the
approximate limits of 10 to 2,000 Hz.
Sweep Time and Duration
The entire frequency range of 10 to 2,000 Hz and return to 10 Hz shall be
traversed in 20 minutes. This cycle shall be performed 12 times in each
of three mutually perpendicular directions (total of 36 times), so that
the motion shall be applied for a total period of approximately 12 hours.
Interruptions are permitted provided the requirements for rate of change
and test duration are met.
Thermal Resistance
ESL <30 nH measured 1/4” from case at 1 MHz
Weight Case EK 30 g typical
Case EA 42 g typical
Case EB 66 g typical
Terminals 18 AWG copper wire with 60/40 tin-lead electroplate, 20 amps max
Case Material Aluminum
Double the Ripple Current Attach the MLP to an external heatsink and you can easily double the ripple
current capability and assure long life through cooler operation. The broad,
at top and bottom on the MLP are ideal for cooling the capacitor and
removing the heat caused by ripple current.
Ripple Current Capability The ripple current capability is set by the maximum permissible internal
core temperature, 88 ºC. This assures that the case does not inate beyond
0.5 inch height.
Air Cooled The ripple currents in the ratings tables are for 85 ºC case temperatures.
For air temperatures without a heatsink use the multipliers Ambient
Temperature, No Heatsink.
Heatsink Cooled Temperature rise from the internal hottest spot, the core, to ambient air is
∆T = I2(ESR)(θcc + θca)
where θcc is the thermal resistance from core to case and θca from case to
ambient. To calculate maximum ripple capability with the MLP attached to a
heatsink use the maximum core temperature and the values for θcc.
Example As an illustration, suppose you operate an insulated MLP332M080EB1C
in 65 ºC air and attach it to a commercial heatsink with a free-air thermal
resistance of 2.7 ºC/W. Use a good thermal grease between the MLP and
the heatsink, and the total thermal resistance is 2.7 +1.7 or 4.4 ºC/W. The
power which would heat the core to 88 °C is (88-65)/4.4 or 5.2 W. For an ESR
of 31 mΩ,5.2 W equates to a ripple current of 13 A.
Large Sides
Heatsinked
Case Length 1.5" 2.0" 3.0"
Insulation ºC/W ºC/W ºC/W
one None 2.9 2.1 1.4
Polyester 3.3 2.4 1.6
both None 2.7 1.9 1.2
Polyester 2.9 2.1 1.3
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type MLP 85 °C Flatpack, Ultra Long Life, Aluminum Electrolytic
Mounting tabs and negative
lead are welded to the case.
Mounting tabs and negative
lead are welded to the case.
The negative lead is welded
to the case.
Three negative leads are
welded to the case.
Outline Drawings Note: The polyester tape wrap may add up to 0.020 inches to the thickness and width of the capacitor.
Part Numbering System
MLP 102 M 200 EB 0 A
Type Capacitance Tolerance Rated Voltage Case Code Insulation Mounting Style
MLP 821=820 µF
102 = 1000 µF
M=±20% Vdc EK, L=1.5 in.
EA, L=2.0 in
EB, L=3.0 in.
0 = bare can
1 = polyester
A = mounting tabs
B = four leads
C = two leads/no tabs
D = hook leads/tabs
E = hook leads/no tabs
Case
Code
Length
L (in)
Weight
(g)
EK 1.5 30
EA 2.0 42
EB 3.0 66
•
•
L ±0.02 1.5 MIN
0.040 DIA, 18 AWG LEADS
(TYP)
1.00
±0.01
1.75
±0.01
0.50 MAX
1.5 MIN
+
•
•
L ±0.02 1.5 MIN
0.040 DIA, 18 AWG
(TYP)
1.00
±0.01
1.75
±0.01
0.50 MAX
+
L +0.375
±0.03
.188
±0.01
Φ.156
±0.01
.375
±0.01
L
0.02
1.00
±0.01 1.75
±0.01
.260
Φ0.156 ±0.01 SLOT
Φ0.040, 18 AWG LEADS
(TYP)
MAY BE SQUARE
.036
.030
.50 MAX
Style D: Hook Leads
L±.02
.375±.01
Φ.156
±0.01
.188±.01
L+.375
±0.03
1.75
±0.01
1.00
±0.01
1.5 MIN
.156 ±0.01 SLOT
MAY BE SQUARE
0.040 DIA, 18 AWG LEADS
(TYP)
.030
.036
.50 MAX
Style B: Four Leads
Style A: Mounting Tabs
Style C: No Tabs
±0.01
Typical Performance Curves
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type MLP 85 °C Flatpack, Ultra Long Life, Aluminum Electrolytic
Very Low Prole
1
10
100
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 11.1 1.2 1.3 1.4 1.5
Expected Operating Life, kh
Rated Ripple-Current Multiple
300 V and Up, Operating Life in Kilohours vs Ripple Current
45 ºC
55 ºC
65 ºC
75 ºC
85 ºC
10
100
1000
00.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 11.1 1.2 1.3 1.4 1.5
Expected Operating Life, kh
Rated Ripple-Current Multiple
7.5 to 250 V, Operating Life in Kilohours vs Ripple Current
45 ºC
55 ºC
65 ºC
75 ºC
85 ºC
ESR max
25 ºC (mΩ) Ripple (A)
Case @ 85 °C ESR max
25 ºC (mΩ) Ripple (A)
Case @ 85 °C
Cap.
(µF) Catalog
Part Number Length
(Inches) Cap.
(µF) Catalog
Part Number Length
(Inches)120 Hz 20 kHz 120 Hz 20 kHz 120 Hz 20 kHz 120 Hz 20 kHz
7.5 Vdc (10 Vdc Surge) 100 Vdc (125 Vdc Surge)
19,000 MLP193M7R5EK0A 76 66 4.2 4.5 1.5 1100 MLP112M100EK0A 112 78 3.5 4.2 1.5
28,000 MLP283M7R5EA0A 50 44 5.8 6.2 2.0 1600 MLP162M100EA0A 76 54 4.7 5.6 2.0
47,000 MLP473M7R5EB0A 30 26 9.1 9.8 3.0 2700 MLP272M100EB0A 46 33 7.4 8.7 3.0
10 Vdc (13 Vdc Surge) 150 Vdc (180 Vdc Surge)
17000 MLP173M010EK0A 77 67 4.2 4.5 1.5 500 MLP501M150EK0A 355 248 1.9 2.3 1.5
26000 MLP263M010EA0A 51 45 5.8 6.1 2.0 770 MLP771M150EA0A 238 166 2.7 3.2 2.0
43000 MLP433M010EB0A 30 27 9.0 9.6 3.0 1300 MLP132M150EB0A 143 100 4.2 5.0 3.0
16 Vdc (20 Vdc Surge) 200 Vdc (250 Vdc Surge)
13000 MLP133M016EK0A 81 69 4.1 4.4 1.5 400 MLP401M200EK0A 388 253 1.9 2.3 1.5
21000 MLP213M016EA0A 53 46 5.7 6.1 2.0 600 MLP601M200EA0A 261 168 2.6 3.2 2.0
38000 MLP383M016EB0A 31 27 9.0 9.6 3.0 1000 MLP102M200EB0A 158 100 3.8 5.0 3.0
20 Vdc (25 Vdc Surge) 250 Vdc (300 Vdc Surge)
9600 MLP962M020EK0A 84 69 4.0 4.4 1.5 330 MLP331M250EK0A 426 258 1.8 2.3 1.5
14000 MLP143M020EA0A 56 46 5.5 6.1 2.0 490 MLP491M250EA0A 285 172 2.4 3.1 2.0
24000 MLP243M020EB0A 33 27 8.7 9.6 3.0 820 MLP821M250EB0A 172 103 3.8 4.9 3.0
25 Vdc (30 Vdc Surge) 300 Vdc (350 Vdc Surge)
8000 MLP802M025EK0A 87 69 3.9 4.4 1.5 220 MLP221M300EK0A 597 393 1.5 1.9 1.5
12000 MLP123M025EA0A 57 46 5.5 6.1 2.0 330 MLP331M300EA0A 399 262 2.1 2.5 2.0
20000 MLP203M025EB0A 34 27 8.6 9.6 3.0 560 MLP561M300EB0A 240 157 3.2 4.0 3.0
35 Vdc (50 Vdc Surge) 350 Vdc (400 Vdc Surge)
5600 MLP562M035EK0A 90 70 3.4 4.4 1.5 150 MLP151M350EK0A 1000 734 1.2 1.4 1.5
8400 MLP842M035EA0A 59 46 5.4 6.1 2.0 220 MLP221M350EA0A 683 503 1.6 1.8 2.0
14000 MLP143M035EB0A 35 27 8.4 9.6 3.0 370 MLP371M350EB0A 420 310 2.3 2.8 3.0
50 Vdc (63 Vdc Surge) 400 Vdc (450 Vdc Surge)
4400 MLP442M050EK0A 97 70 3.7 4.4 1.5 130 MLP131M400EK0A 1320 970 1.0 1.2 1.5
6600 MLP662M050EA0A 62 46 5.2 6.1 2.0 200 MLP201M400EA0A 882 648 1.4 1.6 2.0
11000 MLP113M050EB0A 36 27 8.3 9.6 3.0 330 MLP331M400EB0A 530 390 2.1 2.5 3.0
63 Vdc (75 Vdc Surge) 420 Vdc (475 Vdc Surge)
2200 MLP222M063EK0A 101 76 3.7 4.2 1.5 130 MLP131M420EK0A 1320 970 1.0 1.2 1.5
3300 MLP332M063EA0A 64 50 5.2 5.8 2.0 200 MLP201M420EA0A 882 648 1.4 1.6 2.0
5600 MLP562M063EB0A 36 29 8.3 9.3 3.0 330 MLP331M420EB0A 530 390 2.1 2.5 3.0
80 Vdc (100 Vdc Surge) 450 Vdc (500 Vdc Surge)
1500 MLP152M080EK0A 106 77 3.6 4.2 1.5 110 MLP111M450EK0A 1456 1190 0.96 1.1 1.5
2100 MLP212M080EA0A 72 52 4.9 5.7 2.0 170 MLP171M450EA0A 973 797 1.3 1.5 2.0
3300 MLP332M080EB0A 44 31 7.5 9.0 3.0 280 MLP281M450EB0A 585 480 2.0 2.3 3.0
Ratings
Typical Performance Curves
CDM Cornell Dubilier • 140 Technology Place • Liberty, SC 29657 • Phone: (864)843-2277 • Fax: (864)843-3800
Type MLP 85 °C Flatpack, Ultra Long Life, Aluminum Electrolytic
Very Low Prole
0
0.2
0.4
0.6
0.8
1
1.2
10 100 1000 10000 100000
Frequency (Hz)
Capacitance vs Temperature & Frequency MLP442M050EK1C
65 ºC
25 ºC
85 ºC
0 ºC
–55 ºC
–40 ºC
45 ºC
–20 ºC
0.01
0.1
1
10
100
10 100 1000 10000 100000
Impedance (Ω)
Frequency (Hz)
Impedance vs Temperature and Frequency MLP331M400EB0A
–40 °C
0 °C
25 °C
45 °C
85 °C
65 °C
–20 °C
0.9
0.95
1
1.05
1.1
1.15
0200 400 600 800 1000 1200 1400 1600 1800 2000
Ratio to Initial Value
Test Hours 48 V and 1 A @ 60Hz
MLP 4400 µF 50 Vdc Ripple Life Test 85 ⁰C
ESR
Capacitance
0.9
1.1
1.3
1.5
1.7
1.9
2.1
2.3
2.5
2.7
0200 400 600 800 1000 1200 1400 1600 1800 2000
Ratio to Initial Value
Test Hours
MLP 300 µF 400 Vdc Life Test 105 ⁰C
ESR
Capacitance
1
1.01
1.02
1.03
1.04
1.05
1.06
1.07
1.08
0200 400 600 800 1000 1200 1400 1600 1800 2000
Ratio to Initial Value
Test Hours
MLP 4400 µF 50 Vdc Life Test 85 ⁰C
ESR
Capacitance
0.9
1.1
1.3
1.5
1.7
1.9
2.1
2.3
2.5
0200 400 600 800 1000 1200 1400 1600 1800 2000
Ratio to Initial Value
Test Hours 391 V and 0.5 A @ 60 Hz
MLP 300 µF 400 Vdc Ripple Life Test 85 ºC
ESR
Capacitance
Notice and Disclaimer: All product drawings, descriptions, specications, statements, information and
data (collectively, the “Information”) in this datasheet or other publication are subject to change. The
customer is responsible for checking, conrming and verifying the extent to which the Information con-
tained in this datasheet or other publication is applicable to an order at the time the order is placed. All
Information given herein is believed to be accurate and reliable, but it is presented without any guaran-
tee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability
for certain applications are based on the knowledge that the Cornell Dubilier company providing such
statements (“Cornell Dubilier”) has of operating conditions that such Cornell Dubilier company regards
as typical for such applications, but are not intended to constitute any guarantee, warranty or representa-
tion regarding any such matter – and Cornell Dubilier specically and expressly disclaims any guarantee,
warranty or representation concerning the suitability for a specic customer application, use, storage,
transportation, or operating environment. The Information is intended for use only by customers who
have the requisite experience and capability to determine the correct products for their application. Any
technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference
to the use of any Cornell Dubilier products is given gratis (unless otherwise specied by Cornell Dubilier),
and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although
Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design
and manufacturing of its products, in light of the current state of the art, isolated component failures may
still occur. Accordingly, customer applications which require a high degree of reliability or safety should
employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies
or other appropriate protective measures) in order to ensure that the failure of an electrical component
does not result in a risk of personal injury or property damage. Although all product-related warnings,
cautions and notes must be observed, the customer should not assume that all safety measures are indi-
cated in such warnings, cautions and notes, or that other safety measures may not be required.