Type C Vertical Male Feed-To for Backplanes Series 8071 * 55 signal contacts and up to 22 ground shield contacts in 5 or 5+2 rows of 11 positions * Designed for gas tight press-fit installation * This connector should be used in conjunction with a Style A connector * This connector is designed for end positions only * Twelve different contact styles are available for customizing connector to exact specifications (see page 65) 17 17 17 17 8071 8071 8071 8071 055 055 077 077 506 510 509 512 XXX = Type C 55 signal contacts, no ground contacts L1 XXX = Type C 55 signal contacts, no ground contacts L2 XXX = Type C 55 signal contacts and 22 ground contacts L1,3 XXX = Type C 55 signal contacts and 22 ground contacts L2,3 XXX = Plating Code 833 863 24.95 Contact Area 0.1m min. Au.65m Pd/Ni 0.76m min. Au Press-fit Area 1.5-3.0m Solder 1.5-3.0m Solder Under Coat Nickel 1.2-3.0m Nickel 1.2-3.0m 0 -0.2 0.95 MAX. CONTACT LAYOUT (CONNECTOR MATING SIDE SHOWN) z 2X6=12.0 TYP. 9Z21XX 2.0 1 1 0 ELCO 8071 77P a b c d e f 11 2.0 TYP. 506 1 4.5 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 1 1 1 1 1 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 3 2 2 2 2 2 3 11 1 2 CONTACT DETAIL ELCO 3.5 RECOMMENDED P.C. BOARD LAYOUT (COMPONENT SIDE) 3.5 3.5 2X10+3=23.00.1 38 1 3 1 1 1 1 1 3 3 1 1 1 1 1 3 z a b c d e f 510 11.3 +0.2 -0 CONTACT AREA CONTACT AREA 2X10=20.00.1 9.8 +0.2 -0 f 2. 0 0. f P.C.B. 1 b c d e 2.00.1 TYP. 3 1 1 1 1 1 3 15.4 z a CONTACT AREA 1 8.3 +0.2 -0 77-f0.60.05 11 11 509 509 2X6=12.00.1 2.00.1 TYP. 3.0 13.45 2X10=20.0 3 512 512 3 2 2 2 2 2 3 1 3 2 2 2 2 2 3 z a b c d e f