Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Networking Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Spec-00069 M63.422.2661 7 763.422.2588 Ladder Rack System INDUSTRY STANDARDS APPLICATION Painted and Plated Straight Sections: UL/cULus Classified for Equipment Grounding and Load; File No. E236414 Curved Sections and Splice Kits: UL/cULus Classified for Equipment Grounding; File No. E236414 cULus Bonding & Grounding * Classified as suitable for an equipment ground conductor - CSA C22.2 No. 126.1-02 Section 5.2.8 Load Destruction Test * Two grounding jumper kits required per each splice kit on painted ladder rack sections cULus Load Testing * L oad capacity per 10 support lengths is 369.2 lb.; safety factor of 1.5X - CSA C22.2 No. 126.1-02 Section 5.1 Electrical Continuity Test The Ladder Rack System conveniently routes cables via a modular pathway through unused space on the floor, wall or ceiling while keeping cables accessible for easy maintenance. A variety of straight and curved sections are highly adaptable and can accommodate virtually any room layout. FEATURES * * * * ection cross members welded on 9-in. (229-mm) centers S Accessory adjustable cross members Butt-splice kits and junction-splice kits E ach model is boxed or bagged SPECIFICATIONS * * * traight and curved sections made of 1-1/2-in. steel S S ections available in 6-, 12-, 18- and 24-in. (152-, 305-, 457- and 610-mm) widths Steel connecting and mounting hardware FINISH Available in three finishes: * A NSI 61 gray polyester powder paint * R AL 9005 black polyester powder paint * P lated ACCESSORIES Touch-up Paint 1 Networking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00069 M Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Ladder Rack Straight Sections (cULus Classified) Supports cable on straight runs. Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) 16 gauge tubular steel with a painted or plated finish. Nominal installed length is 10 ft. (3.05 m). Each section is 9 ft. 11-1/2 in. (3.03 m) long with cross members welded at 9-in. (229-mm) intervals. Bulletin: DCR Finish Gray Black Plated Gray Black Plated Gray Black Plated Black Catalog Number LSS6G LSS6BLK LSS6GZ LSS12G LSS12BLK LSS12GZ LSS18G LSS18BLK LSS18GZ LSS24BLK W (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00 W (mm) 152 152 152 305 305 305 457 457 457 610 Ladder Rack Curved Sections (cULus Classified) Provide a vertical change in direction. They are made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) tubular steel with a painted or plated finish. Cross members are welded on the inside (inside bends) or outside (outside bends) of the section. Connect to straight section with butt-splice kits. Designed for category 5e, 6, 6A and fiber optic cable. Bulletin: DCR Catalog Number LIB6G LIB6BLK LIB6GZ LIB12G LIB12BLK LIB12GZ LIB18G LIB18BLK LIB18GZ LIB24BLK LOB6G LOB6BLK LOB6GZ LOB12G LOB12BLK LOB12GZ LOB18G LOB18BLK LOB18GZ LOB24BLK Finish Gray Black Plated Gray Black Plated Gray Black Plated Black Gray Black Plated Gray Black Plated Gray Black Plated Black Vertical Bend Type Inside Inside Inside Inside Inside Inside Inside Inside Inside Inside Outside Outside Outside Outside Outside Outside Outside Outside Outside Outside W (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00 W (mm) 152 152 152 305 305 305 457 457 457 610 152 152 152 305 305 305 457 457 457 610 90-Degree Horizontal E-Bend Section (cULus Classified) Provide a 90-degree horizontal change in cable runway direction. Made of 1-1/2 in. x 3/8 in. (38 mm x 8 mm) tubular steel with a painted or plated finish. Connect to straight sections with butt-splice kits. Designed for category 5e, 6, 6A and fiber optic cable. Bulletin: DCR Catalog Number L90HB12G L90HB12BLK L90HB12GZ L90HB18G L90HB18BLK L90HB18GZ L90HB24BLK Finish Gray Black Plated Gray Black Plated Black W (in.) 12.00 12.00 12.00 18.00 18.00 18.00 24.00 W (mm) 305 305 305 457 457 457 610 Butt-Splice Kit (cULus Classified) Joins straight ladder rack sections, inside and outside bends, and 90-degree horizontal e-bends. Each kit connects one section to another. Includes mounting hardware. Catalog Number LBSKG LBSKB LBSK Finish Gray Black Plated Kit Qty. 2 2 2 Catalog Number LABSKG LABSKB LABSK Finish Gray Black Plated Kit Qty. 2 2 2 Bulletin: DCR Adjustable Butt-Splice Kit (cULus Classified) Provides a change in up-and-down direction of the cable runway. It can be adjusted to any angle from 0 to 90 degrees. Made of steel with a painted or plated finish. Each kit connects one ladder rack section to another. Includes mounting hardware. Bulletin: DCR EQUIPMENT PROTECTION Spec-00069 M PH 763.422.2661 * FAX 763.422.2588 * HOFFMANONLINE.COM Networking 2 Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Junction Splice Kit (cULus Classified) Connects two straight ladder rack sections at a 90-degree angle. Made of steel with a painted or plated finish. Each kit connects one section to another. Includes mounting hardware. Catalog Number LJSKG LJSKB LJSK Finish Gray Black Plated Kit Qty. 2 2 2 Catalog Number LAJSKG LAJSKB LAJSK Finish Gray Black Plated Kit Qty. 2 2 2 Catalog Number LRP LRPB Finish Plated Black Kit Qty. 1 1 Catalog Number LLBG LLBB LLB Finish Gray Black Plated Kit Qty. 1 1 1 Bulletin: DCR Adjustable Junction Splice Kit (cULus Classified) Connects two ladder rack sections at any junction angle. Made of steel with a painted or plated finish. Each kit connects one section to another. Includes mounting hardware. Bulletin: DCR Retaining Post Kit Provides extra ladder rack capacity. Mounts onto rack side stringer. Post is unthreaded 1/2-in. tube. Kit components are plated steel. Includes post cap and mounting hardware. Bulletin: DCR L-Bracket Kit The L-Bracket Kit supports power or other cables that need to be separated from the main cable run. Made of steel with a painted or plated finish. Mounts onto ladder rack stringer. Includes mounting hardware. Bulletin: DCR Radius Drop Kit Mounts over ladder rack cross member to provide bending radius when dropping cable. Includes cable spools to separate cable and all mounting hardware. Made of extruded aluminum. Bulletin: DCR Catalog Number LRD6G LRD6BLK LRD6GZ LRD12G LRD12BLK LRD12GZ LRD18G LRD18BLK LRD18GZ LRD24BLK Finish Gray Black Aluminum Gray Black Aluminum Gray Black Aluminum Black Cable Runway Width (in.) 6.00 6.00 6.00 12.00 12.00 12.00 18.00 18.00 18.00 24.00 Cable Runway Width(mm) 152 152 152 305 305 305 457 457 457 610 Kit Qty. 1 1 1 1 1 1 1 1 1 1 Stringer Radius Drop Kit Mounts over ladder rack stringer to provide bending radius when dropping cable. Includes cable spools to separate cable and all mounting hardware. Made of extruded aluminum. Catalog Number LSRDG LSRDBLK LSRDGZ Finish Gray Black Aluminum Kit Qty. 1 1 1 Bulletin: DCR 3 Networking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00069 M Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Ceiling Support Kit Supports ladder rack from ceiling. Components available separately or as a kit. Six-foot-long, 5/8-in. diameter rod is threaded for easy tension adjustment. Made of plated steel. Requires surface mounting hardware (not included). Bulletin: DCR LRWSBK Foot Kit Secures ladder rack to floor, ceiling or wall. Made of steel with a painted or plated finish. One kit secures one ladder rack section. Requires surface mounting hardware (not included). Catalog Number LCK Finish Plated LTR LRWBK Plated Plated LRWBKB Black LCBK Plated LCBKB Black LRWSBK Plated LRWSBKB Black Description Kit includes one each: - LTR Threaded Rod - 5/8-in. nuts (4) - LRWBK Rack Runway Bracket - LCBK Ceiling Bracket 5/8-in. x 6-ft. Threaded Rod Rack Runway Brackets (10) 5/8-in. nuts (20) Rack Runway Brackets (10) 5/8-in. nuts (20) Ceiling Brackets (10) 5/8-in nuts (20) Ceiling Brackets (10) 5/8-in nuts (20) Rack-to-Runway Brackets (10) Slip-On 5/8 in. nuts (2) Rack-to-Runway Brackets (10) Slip-On 5/8 in. nuts (2) Finish Gray Black Plated Catalog Number LFKG LFKB LFK Kit Qty. 1 1 1 1 1 1 1 1 Kit Qty. 2 2 2 Bulletin: DCR Rack-to-Runway Mounting Plate Kit Secures ladder rack to the top of equipment racks. Made of steel with a painted or plated finish. The plate is designed for mounting either parallel or perpendicular to the rack. Includes mounting hardware. Bulletin: DCR Catalog Number LRRMPG LRRMPBLK LRRMPGZ LRRMPG18 LRRMPBLK18 LRRMPGZ18 LRRMPBLK24 Fits Ladder Width 6, 12 6, 12 6, 12 12, 18 12, 18 12, 18 18, 24 Finish Gray Black Plated Gray Black Plated Black Kit Qty. 1 1 1 1 1 1 1 Vertical Wall Bracket Secures ladder rack section to wall or other flat surface. Made of steel with a painted or plated finish. Requires surface mounting hardware (not included). Catalog Number LVWBG LVWBB LVWB Finish Gray Black Plated Kit Qty. 2 2 2 Bulletin: DCR EQUIPMENT PROTECTION Spec-00069 M PH 763.422.2661 * FAX 763.422.2588 * HOFFMANONLINE.COM Networking 4 Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Triangle Support Bracket Kit Supports ladder rack from wall. Bracket is made of steel with painted or plated finish. Brackets have predrilled mounting holes for two sizes of ladder rack. Includes one J-Bolt Kit. Bulletin: DCR Catalog Number LTSB12G LTSB12BLK LTSB12GZ LTSB18G LTSB18BLK LTSB18GZ LTSB24BLK A in. 0.00 0.00 0.00 0.00 0.00 0.00 24.00 A mm 610 Finish Gray Black Plated Gray Black Plated Black Fits Cable Runway 6, 12 6, 12 6, 12 12, 18 12, 18 12, 18 12, 18, 24 Kit Qty. 1 1 1 1 1 1 1 Modular Triangle Support Bracket Kit Secures and supports ladder rack to wall. Design features three bracket support arms that easily attach to each other with quick-release pins and fold down to ease assembly. Each model accomodates two ladder rack widths. Kit includes one modular bracket assembly, three quick-release pins and two J-bolts with washers and nuts. Bracket made of painted steel with plated hardware. Fits Cable Runway 6, 12 12, 18 18, 24 Finish Black Black Black Catalog Number LMTSB12B LMTSB18B LMTSB24B Kit Qty. 1 1 1 Bulletin: DCR Wall Angle Support Supports ladder rack from wall or other flat surface. Made of 2-in. x 2-in. 10 gauge steel angle with painted or plated finish. Includes two J-bolts, nuts and screws. Bulletin: DCR Catalog Number LWASK6G Finish Gray LWASK6BLK Black LWASK6GZ Plated LWASK12G Gray LWASK12BLK Black LWASK12GZ Plated LWASK18G Gray LWASK18BLK Black LWASK18GZ Plated LWASK24BLK Black L in./mm 8.00 203 8.00 203 8.00 203 14.00 356 14.00 356 14.00 356 20.00 508 20.00 508 20.00 508 26.00 660 R in./mm 6.00 152 6.00 152 6.00 152 12.00 305 12.00 305 12.00 305 18.00 457 18.00 457 18.00 457 24.00 610 S in./mm 6.38 162 6.38 162 6.38 162 12.38 314 12.38 314 12.38 314 18.38 467 18.38 467 18.38 467 24.38 619 Kit Qty. 1 1 1 1 1 1 1 1 1 1 Corner Support Bracket Kit Provides additional support for 90-degree ladder rack junction. Made of steel with a painted or plated finish. Bulletin: DCR 5 Networking Catalog Number LCSKG LCSKB LCSK SUBJECT TO CHANGE WITHOUT NOTICE Finish Gray Black Plated Kit Qty. 1 1 1 EQUIPMENT PROTECTION Spec-00069 M Cable Pathway / Bonding and Grounding Cable Pathway and Accessories End Cap Kit Provides protective covering for ends of ladder rack. Made of black vinyl. Catalog Number LEC Kit Qty. 2 Bulletin: DCR Runway Termination Kit Provides a solid termination when the last section of ladder rack ends away from a wall. Made of steel with a painted or plated finish. Bulletin: DCR Fits Cable Runway 12 12 12 18 18 18 24 Finish Gray Black Plated Gray Black Plated Black Catalog Number LRTK12G LRTK12B LRTK12 LRTK18G LRTK18B LRTK18 LRTK24B Kit Qty. 1 1 1 1 1 1 1 Movable Cross Member Supports cable at drop locations between welded cross members. Made of steel with a painted or plated finish. For maximum cable protection, use with radius drop kit. Includes hardware for secure mounting to ladder rack stringers. Bulletin: DCR Rack-to-Wall Kit Includes one section of straight ladder rack and everything needed to fasten the ladder section to an open frame rack and to the wall. Ladder is 54-in. (1372-mm) long by 12-in. (305-mm) wide. All parts have a black painted finish. Order open frame rack separately. Catalog Number LMCM12G LMCM12BLK LMCM12GZ LMCM18G LMCM18BLK LMCM18GZ LMCM24BLK Finish Gray Black Plated Gray Black Plated Black Catalog Number E45RUBKIT W (in.) 12.00 12.00 12.00 18.00 18.00 18.00 24.00 Kit Qty. 1 1 1 1 1 1 1 W (mm) 305 305 305 457 457 457 610 Description Each Rack-to-Wall Kit includes one: - LSS12BLK [54-in. (1372-mm) long] Ladder Rack* - LWASK12BLK Wall Angle Support with j-bolts - LRRMPBLK Rack-to-Runway Mounting Kit - LEC End Cap Kit * Ladder Rack is cULus Classified Bulletin: DOFR2 Runway Elevation Kit 6WUDLJKW 6HFWLRQ $ 5DFNWR5XQZD\ 0RXQWLQJ3ODWH.LW 2UGHU6HSDUDWHO\ 2SHQ )UDPH 5DFN EQUIPMENT PROTECTION Spec-00069 M Elevates ladder rack 3 or 6 in. (76 or 152 mm) above rack-toladder mounting plate. Use on any width ladder rack. Kit includes two brackets and all mounting hardware. Made of heavy plated steel. Bulletin: DCR Catalog Number LEK3 LEK3B LEK6 LEK6B LEK12 LEK12B A (in.) 3.00 3.00 6.00 6.00 12.00 12.00 PH 763.422.2661 * FAX 763.422.2588 * HOFFMANONLINE.COM A (mm) 76 76 152 152 305 305 Finish Plated Black Plated Black Plated Black Kit Qty. 1 1 1 1 1 1 Networking 6 Cable Pathway / Bonding and Grounding Cable Pathway and Accessories Runway Overhead 12-in. Stack Kit Allows stacking any width of ladder rack runways 12 in. (305 mm) above each other. Each kit contains two complete stacking brackets with all necessary hardware. Use one kit at least every 5 ft. (1.5 m). Brackets and fasteners made of plated steel. Catalog Number LST12 LST12B Finish Plated Black Includes 2 brackets and hardware 2 brackets and hardware Kit Qty. 1 1 Bulletin: DCR Runway Center Support Kit Threaded rod and bracket supports center of ladder rack from ceiling. Kit includes heavy-duty ladder rack cross member, two mounting brackets, two #12-24 screws, 5/8-in. threaded rod, protected sleeve and four 5/8-in. nuts. Use one kit at least every 5 ft. (1.5 m). Made of plated steel. Catalog Number LCSK6 LCSK12 LCSK18 LCSK24 Finish Plated Plated Plated Plated Catalog Number LCRDSK Finish Black plastic spool; plated steel bracket Fits Cable Runway 6 12 18 24 Kit Qty. 1 1 1 1 Bulletin: DCR Spool Divider Kit Spools separate cables to improve cable management and to control cable-to-cable distances. Spool and bracket attach to ladder rack cross member and can be located anywhere across the width. Kit includes ten 4-in.-tall spools, brackets and all necessary hardware. Spool made of black plastic and bracket made of plated steel. Kit Includes 10 spools, 10 brackets and mounting hardware Bulletin: DCR Insulated Ground Jumper Kit Fastens across splices to provide a secure ground between sections of ladder rack. Made of #6 AWG x 7 strand wire with green THW insulation and two-hole compression lugs mounted on each end. Includes fasteners. Catalog Number DGJ Conductor Type #6-7 Stranded L in./mm 12.00 305 cULus requires 2 kits per splice on all painted ladder sections Bulletin: DBG 7 Networking SUBJECT TO CHANGE WITHOUT NOTICE EQUIPMENT PROTECTION Spec-00069 M Cable Pathway / Bonding and Grounding Cable Pathway and Accessories J-Bolt Kit Connects ladder rack to top of cabinet or to auxiliary support channel. Each kit includes two J-bolts and makes one support connection. Kit components are plated steel. Includes mounting hardware. Each kit contains: (2) J-Bolts, 5/16 in. (2) Nuts, 5/16 in. (2) Washers, 5/16 in. (2) Lock Washers, 5/16 in. (1) Plate Bulletin: DCR J (in.) 3.5 5.00 6.00 7.00 Catalog Number LJBK LJBK5 LJBK6 LJBK7 J (mm) 89 127 152 178 Finish Plated Plated Plated Plated - CABLERACKTM % & $ CABLERACKTM is used for ladder or basket tray mounting and securing 19-inch rack equipment for Data centers, Telecommunication rooms and other locations. The fixed, open frame rack allows suspending 19-inch rack equipment from Ladder Rack or Basket Tray. The rack has universal tapped holes per industry standards to accommodate typical applications. These open frame racks are ideal for high-density cabling applications which require above-the-cabinet mounting of equipment, and provide maximum access to cables and equipment. CABLERACK is ideal for Data Center applications, expanding equipment to above-the-cabinet while providing increased equipment and cable densities. Standard Product Catalog Number E19T6U AxBxC in./mm 12.44 x 20.16 x 11.50 316 x 512 x 292 Rack Units 6 Cable Bend Radius Accessory ECMBA4 Bulletin: DOFRW EQUIPMENT PROTECTION Spec-00069 M PH 763.422.2661 * FAX 763.422.2588 * HOFFMANONLINE.COM Networking 8