Printed in Japan 2008.12.BY©
古紙配合率100%再生紙使用す。大豆油で印刷す。
この パンはエコマー 紙を 使 していま
1. For the export of products which are controlled items subject to foreign and domestic export laws and regulations, you must obtain approval and/or follow the formalities of such laws
and regulations.
2. Products must not be used for military and/or antisocial purposes such as terrorism, and shall not be supplied to any party intending to use the products for such purposes.
3. Unless provided otherwise, the products have been designed and manufactured for application in equipment and devices which are sold to end-users in the market, such as AV
(audio visual) equipment, home electronic equipment, office and commercial electronic equipment, information and communication equipment or amusement equipment. The
products are not intended for use in, and must not be used for, any application of nuclear equipment, driving control equipment for aerospace or any other unauthorized use.
With the exception of the above mentioned banned applications, for applications involving high levels of safety and liability such as medical equipment, burglar alarm equipment,
disaster prevention equipment and undersea equipment, please contact an Alps sales representative and/or evaluate the total system on the applicability. Also, implement a fail-safe
design, protection circuit, redundant circuit, malfunction protection and/or fire protection into the complete system for safety and reliability of the total system.
4. Before using products which were not specifically designed for use in automotive applications, please contact an Alps sales representative.
1. Specifications indicated in this catalog are an outline only. When employing the product, please use an officially authorized specification sheet for the supply contract.
2. Unless specifically indicated otherwise, products in this catalog have been designed and manufactured for use in ordinary electronic equipment and devices, such as AV equipment,
electrical home appliances, office machines and communications equipment. Equipment manufacturers are consequently advised that when these products are planned for use in
equipment that requires a high degree of safety and reliability, especially items like medical equipment, aviation and aircraft equipment, space equipment and burglar alarm
equipment, they should ensure equipment safety by providing protection and redundant circuitry and should fully study the suitability of such products for the intended equipment.
3. The external appearance, performance and other properties of the product are subject to change for improvement without prior notice. Products introduced in this catalog may be
discontinued without prior notice.
4. Names of products and companies and titles of specifications indicated in this catalog are mostly trademarks or registered trademarks of their respective owners.
5. Please contact us for any enquiries and queries on our products and their uses.
6. The information in this catalog is based on our research as of September 2011.
7. This catalog is valid until December 31, 2011.
ProductsInformationCenter
81(3)5499-8154
ProductsInformationSite
http://www.alps.com/products/e/
Precautionswhenhandlingourproducts
Cautionsforusingthiscatalog
Inquiriesaboutthisproduct
1-7,Yukigaya-otsukamachi,Ota-ku,Tokyo,145-8501,Japan
SDDESeries
Features
Applications
TypicalSpecifications
Dimensions
PowerSwitchwithEncoder
MainpowerON/OFF,Modeselection,Startcanbecompletedwithoneswitch
Items Specifications
RatingACcontact
RatingDCcontact
RatingEncoder
Operatinglife(Encoder
Pushtravel
-Twoshaftsarecombined.
CentershaftPushswitch(Unlatching)
OutsideShaftEncoder
-Zerostandbypowerconsumptionisavailablebyauto-off
functionwithrelaymovementduetobuilt-inbothACand
DCcontactinthepushswitch
-Bothpulseandabsoluteoutputareavailableforthe
installedencoder
-
Dryer,Microwaveoven,IHcookingheater,Washingmachine
CircuitDiagram
1A/16A 250V〜
20mA12VDC
0.1A12VDC
30,000cycles
1.85mm
Unit :mm
NEW
2011
A
24
24
24.6
2-2.1
3.05
2-2.9
8.6
11.9
6.5
14
4
13
6
3
13
16
4.4
4.5
R1
0.87
Full stroke
position
P.W.Board
mounting face
DC switch
terminal DC switch
terminal
Terminal No
Terminal No
AC switch
terminal AC switch
terminal
Recommended Hole Dimension
φ10
φ9.2
φ3.05
φ4
4-φ1.4 hole
4-φ1.3 hole
φ5.9
3.2
3
10
4
1.5
C0.5
C0.5
φ6
φ9.4
φ2.95
2.7
14
0.5
4-1
3
13
25.6
16
6
3
3 44
1
1 22
6
4-0.8
4-0.5
8.6 6.5
13
8 C C 7 5
15
17.23.5
30 5.5
1.85
40
(t= 1.6
Terminal
CMotor,heater,pumpetc.
Load
Relay
Relay
switch
Powerswitchwithencoder
DCswitch
ACswitch
encoder
ACpowerline
Control
board
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
ALPS:
SDDE1C0100