ZM4728A to ZM4764A Vishay Semiconductors Zener Diodes Features * Silicon planar power Zener diodes * For use in stablilizing and clipping circuits with high power rating * Standard Zener voltage tolerance is 5 % * These diodes are also available in the DO-41 case with type designation 1N4728A to 1N4764A * AEC-Q101 qualified * Compliant to RoHS directive 2002/95/EC and in accordance to WEEE 2002/96/EC * Halogen-free according to IEC 61249-2-21 definition 18315 Mechanical Data Case: MELF DO-213AB (glass) Weight: approx. 135 mg Cathode band color: black Packaging codes/options: GS18/5K per 13" reel (12 mm tape), 10K/box GS08/1.5K per 7" reel (12 mm tape), 12K/box Absolute Maximum Ratings Tamb = 25 C, unless otherwise specified Parameter Test condition Symbol Value Unit Ptot 1 1) W Zener current (see Table "Characteristics") Power dissipation Note: 1) Valid provided that electrodes are kept at ambient temperature. Thermal Characteristics Tamb = 25 C, unless otherwise specified Parameter Test condition Thermal resistance junction to ambient air Symbol RthJA Value Unit 1) K/W 170 Junction temperature Tj 175 C Storage temperature Tstg - 65 to + 175 C Note: 1) Valid provided that electrodes are kept at ambient temperature. Document Number 85786 Rev. 1.4, 15-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 1 ZM4728A to ZM4764A Vishay Semiconductors Electrical Characteristics Part number Nominal Zener voltage 1) Test current VZ at IZT IZT Maximum dynamic impedance ZZT at IZT ZZK at IZK IZK Maximum reverse leakage current IR Surge current 3) Test voltage at TA = 25 C VR IR Maximum regulator current 2) IZM V mA mA A V mA mA ZM4728A 3.3 76 10 400 1 100 1 1380 276 ZM4729A 3.6 69 10 400 1 100 1 1260 252 ZM4730A 3.9 64 9 400 1 50 1 1190 234 ZM4731A 4.3 58 9 400 1 10 1 1070 217 ZM4732A 4.7 53 8 500 1 10 1 970 193 ZM4733A 5.1 49 7 550 1 10 1 890 178 ZM4734A 5.6 45 5 600 1 10 2 810 162 ZM4735A 6.2 41 2 700 1 10 3 730 146 ZM4736A 6.8 37 3.5 700 1 10 4 660 133 ZM4737A 7.5 34 4 700 0.5 10 5 605 121 ZM4738A 8.2 31 4.5 700 0.5 10 6 550 110 ZM4739A 9.1 28 5 700 0.5 10 7 500 100 ZM4740A 10 25 7 700 0.25 10 7.6 454 91 ZM4741A 11 23 8 700 0.25 5 8.4 414 83 ZM4742A 12 21 9 700 0.25 5 9.1 380 76 ZM4743A 13 19 10 700 0.25 5 9.9 344 69 ZM4744A 15 17 14 700 0.25 5 11.4 304 61 ZM4745A 16 15.5 16 700 0.25 5 12.2 285 57 ZM4746A 18 14 20 750 0.25 5 13.7 250 50 ZM4747A 20 12.5 22 750 0.25 5 15.2 225 45 ZM4748A 22 11.5 23 750 0.25 5 16.7 205 41 ZM4749A 24 10.5 25 750 0.25 5 18.2 190 38 ZM4750A 27 9.5 35 750 0.25 5 20.6 170 34 ZM4751A 30 8.5 40 1000 0.25 5 22.8 150 30 ZM4752A 33 7.5 45 1000 0.25 5 25.1 135 27 ZM4753A 36 7 50 1000 0.25 5 27.4 125 25 ZM4754A 39 6.5 60 1000 0.25 5 29.7 115 23 ZM4755A 43 6 70 1500 0.25 5 32.7 110 22 ZM4756A 47 5.5 80 1500 0.25 5 35.8 95 19 ZM4757A 51 5 95 1500 0.25 5 38.8 90 18 ZM4758A 56 4.5 110 2000 0.25 5 42.6 80 16 ZM4759A 62 4 125 2000 0.25 5 47.1 70 14 ZM4760A 68 3.7 150 2000 0.25 5 51.7 65 13 ZM4761A 75 3.3 175 2000 0.25 5 56 60 12 ZM4762A 82 3 200 3000 0.25 5 62.2 55 11 ZM4763A 91 2.8 250 3000 0.25 5 69.2 50 10 ZM4764A 100 2.5 350 3000 0.25 5 76 45 9 Notes: 1) The zener impedance is derived from the 1 kHz AC voltage which results when an AC current having an RMS value equal to 10 % of the zener current (IZT or IZK) is superimposed on IZT or IZK. Zener impedance is measured at two points to insure a sharp knee on the breakdown curve and to eliminate unstable units 2) Valid provided that electrodes are kept at ambient temperature 3) Measured under thermal equilibrium and DC test conditions. www.vishay.com 2 For technical questions within your region, please contact one of the following: Document Number 85786 DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com Rev. 1.4, 15-Sep-10 ZM4728A to ZM4764A Vishay Semiconductors Typical Characteristics Tamb = 25 C, unless otherwise specified W 1.0 Ptot 0.8 0.6 0.4 0.2 0 18289 0 100 200 C Tamb Figure 1. Admissible Power Dissipation vs. Ambient Temperature Package Dimensions in millimeters (inches): MELF DO-213AB (glass) 2.6 (0.102) 2.4 (0.094) Cathode identification 0.55 (0.022) 5.2 (0.205) 4.8 (0.189) The gap between plug and glass can be either on cathode or anode side Foot print recommendation: 4.00 (0.157) max. 3.00 (0.118) min. min. 1.25 (0.049) 6.50 (0.256) 18317 ref. Document Number 85786 Rev. 1.4, 15-Sep-10 For technical questions within your region, please contact one of the following: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com www.vishay.com 3 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 11-Mar-11 www.vishay.com 1