VS-1N1183, VS-1N3765, VS-1N1183A, VS-1N2128A Series
www.vishay.com Vishay Semiconductors
Revision: 10-Jul-2018 2Document Number: 93492
For technical questions within your region: DiodesAmericas@vishay.com, DiodesAsia@vishay.com, DiodesEurope@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Notes
(1) JEDEC® registered values
(2) I2t for time tx = I2√t x √tx
Notes
(1) JEDEC registered values®
(2) Recommended for pass-through holes
(3) Recommended for holed threaded heatsinks
FORWARD CONDUCTION
PARAMETER SYMBOL TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS
Maximum average forward current
at case temperature IF(AV) 1-phase operation,
180° sinusoidal conduction
35 (1) 35 (1) 40 (1) 60 (1) A
140 (1) 140 (1) 150 (1) 140 (1) °C
Maximum peak one cycle
non-repetitive surge current IFSM
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Following any
rated load
condition and
with rated
VRRM applied
480 380 765 860
A
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
500 (1) 400 (1) 800 (1) 900 (1)
Half cycle 50 Hz
sine wave or 6 ms
rectangular pulse
Following any
rated load
condition and
with ½ VRRM
applied following
surge = 0
570 455 910 1000
Half cycle 60 Hz
sine wave or 5 ms
rectangular pulse
595 475 950 1050
Maximum I2t for fusing
I2t
t = 10 ms With rated VRRM
applied following
surge, initial
TJ = TJ maximum
1140 730 2900 3700
A2s
t = 8.3 ms 1040 670 2650 3400
Maximum I2t for individual
device fusing
t = 10 ms With VRRM = 0
following surge,
initial
TJ = TJ maximum
1610 1030 4150 5250
t = 8.3 ms 1470 940 3750 4750
Maximum I2√t for individual
device fusing I2√t (2) t = 0.1 to 10 ms,
VRRM = 0 following surge 16 100 10 300 41 500 52 500 A2√s
Maximum peak forward voltage
at maximum forward current (IFM)VFM TJ = 25 °C 1.7 (1) 1.8 (1) 1.3 (1) 1.3 (1) V
110 110 126 188 A
Maximum average
reverse current
VRRM = 700
IR(AV)
Maximum rated IF(AV) and TC
-5.0
(1) --
mA
VRRM = 800 - 4.0 (1) --
VRRM = 900 - 3.0 (1) --
VRRM = 1000 - 2.0 (1) --
Maximum rated IF(AV), VRRM and TC10 (1) -2.5
(1) 10 (1)
THERMAL AND MECHANICAL SPECIFICATIONS
PARAMETER SYMBOL TEST CONDITIONS 1N1183 1N3765 1N1183A 1N2128A UNITS
Maximum operating
case temperature range TC-65 to +190 (1) -65 to +200
°C
Maximum storage
temperature range TStg -65 to +175 (1) -65 to +200
Maximum internal thermal
resistance, junction to case RthJC DC operation 1.00 (1) 1.1 (1) 0.65 (1)
°C/W
Thermal resistance,
case to sink RthCS Mounting surface, smooth, flat and greased 0.25
Maximum allowable
mounting torque
(+ 0 %, - 10 %)
Not lubricated thread, tighting on nut (2) 3.4 (30)
N · m
(lbf · in)
Lubricated thread, tighting on nut (2) 2.3 (20)
Not lubricated thread, tighting on hexagon (3) 4.2 (37)
Lubricated thread, tighting on hexagon (3) 3.2 (28)
Approximate weight 17 g
0.6 oz.
Case style JEDEC® DO-5 (DO-203AB)