DSCC 93026 www.vishay.com Vishay DSCC 93026 SuperTan(R) Wet Tantalum Capacitors FEATURES * * * * * * * * * * * Vishay's DSCC 93026 capacitor represents a major breakthrough in wet tantalum technology. Its unique cathode system provides the highest capacitance per unit volume. The design facilitates a doubling of capacitance, lower ESR and higher ripple current rating compared with conventional wet tantalum products. Moreover, the DSCC 93026 has the capacitance stability of a solid tantalum capacitor and there are no circuit impedance restrictions. The DSCC 93026 is housed in an all tantalum, hermetically sealed case and is manufactured to withstand hazardous environments. The DSCC 93026 is used widely in the defense and aerospace industries and whenever there is a space problem. Terminations: Standard tin/lead (Sn/Pb) Very high capacitance 10 F to 1800 F 25 VDC to 125 VDC - 55 C to + 125 C Very low ESR High ripple current All tantalum case Hermetically sealed Low DCL Mounting: Axial APPLICATION NOTES a) No continuous reverse voltage permissible. b) The peak of the applied AC ripple and the applied DC voltage must not exceed the DC voltage rating of the capacitor. c) Ripple current ratings by part number at 85 C and 40 kHz are included in the table. Ripple current correction factors for other temperatures and frequencies are given on the next page. d) Transient reverse voltage surges are acceptable under the following conditions: The peak reverse voltage does not exceed 1.5 V and the peak current times the duration of the reverse transient does not exceed 0.05 As. In addition, the repetition frequency of the reverse voltage surge is less than 10 Hz. DIMENSIONS in inches [millimeters] Terminal welded to case 0.025 + 0.002 (0.64 + 0.05) 0.250 (6.35) MAX. 0.094 (2.38) MAX. E L1 E "D" dia. Terminal location within 0.031 of center CASE CODE D 0.016 [0.41] MAX. INSULATED (DIA.) L1 + 0.031 [0.79] UNINSULATED E 0.250 [6.35] MAX. T1 0.188 [4.78] 0.219 [5.56] 0.453 [11.51] 1.500 [38.10] T2 0.281 [7.14] 0.312 [7.92] 0.641 [16.28] 2.250 [57.15] L2 0.281 [7.14] 0.312 [7.92] 1.008 [25.60] 2.250 [57.15] T3 0.375 [9.52] 0.406 [10.31] 0.766 [19.46] 2.250 [57.15] T4 0.375 [9.52] 0.406 [10.31] 1.062 [26.97] 2.250 [57.15] Notes * Material at egress is tantalum * Insulation sleeving will lap over the ends of the capacitor case * Tinned nickel leads, solderable and weldable Revision: 01-Feb-12 * Approx. weight T1: 2.3 g, T2: 5.7 g T3: 9.4 g, T4: 14.8 g Document Number: 40136 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 93026 www.vishay.com Vishay ORDERING INFORMATION 93026 -29 K DSCC DRAWING NUMBER DASH NUMBER CAPACITANCE TOLERANCE S K = 10 % M = 20 % DEFENSE SUPPLY CENTER, COLUMBUS COLUMBUS, OHIO S = Sleeved U = Unsleeved DRAWING NO. 93026 STANDARD RATINGS CAPACITANCE AT 25 C 120 Hz (F) CASE CODE MAX. ESR 120 Hz () MAX. DCL (A) 25 C 85 C/ 125 C MAX. IMP. AT - 55 C 120 Hz () MAX. CAPACITANCE CHANGE (%) - 55 C 85 C 125 C AC RIPPLE 85 C 40 kHz (mA) RMS PART NUMBER 25 VDC AT 85 C; 15 VDC AT 125 C 120 T1 1.3 1 5 25 - 42 +8 + 12 1250 93026-29(1)(2) 560 T2 0.83 2 10 12 - 65 + 10 + 15 2100 93026-30(1)(2) 1100 L2 0.5 3 25 7 - 60 + 20 + 45 3200 93026-57(1)(2) 1200 T3 0.65 5 20 7 - 70 + 12 + 18 2600 93026-31(1)(2) 1800 T4 0.5 6 25 7 - 75 + 12 + 20 3100 93026-32(1)(2) 30 VDC AT 85 C; 20 VDC AT 125 C 100 T1 1.3 1 5 25 - 38 +8 + 12 1200 93026-33(1)(2) 470 T2 0.85 2 10 15 - 65 + 10 + 18 1800 93026-34(1)(2) 950 L2 0.5 5 30 7 - 55 + 18 + 35 3200 93026-58(1)(2) 1000 T3 0.7 7 25 7 - 70 + 10 + 18 2500 93026-35(1)(2) 1500 T4 0.6 12 35 6 - 72 + 10 + 20 3000 93026-36(1)(2) 50 VDC AT 85 C; 30 VDC AT 125 C 68 T1 1.5 1 5 35 - 25 +8 + 15 1050 93026-37(1)(2) 220 T2 0.9 2 10 17.5 - 50 +8 + 15 1800 93026-38(1)(2) 450 L2 0.6 3 25 7.5 - 45 + 12 + 30 2900 93026-59(1)(2) 470 T3 0.75 3 25 10 - 50 +8 + 15 2100 93026-39(1)(2) 680 T4 0.7 5 40 8 - 58 + 10 + 20 2750 93026-40(1)(2) 60 VDC AT 85 C; 40 VDC AT 125 C 47 T1 2.0 1 5 44 - 25 +8 + 12 1050 93026-41(1)(2) 150 T2 1.1 2 10 20 - 40 +8 + 15 1650 93026-42(1)(2) 370 L2 0.6 3 25 9 - 33 +9 + 20 2900 93026-60(1)(2) 390 T3 0.9 3 25 15 - 60 +8 + 15 2100 93026-43(1)(2) 560 T4 0.8 5 40 10 - 58 +8 + 15 2750 93026-44(1)(2) 75 VDC AT 85 C; 50 VDC AT 125 C 33 T1 2.5 1 5 66 - 25 +5 +9 1050 93026-45(1)(2) 110 T2 1.3 2 10 24 - 35 +6 + 10 1650 93026-46(1)(2) 250 L2 0.8 5 30 12 - 30 +6 + 15 2500 93026-61(1)(2) 330 T3 1.0 3 30 12 - 45 +6 + 10 2100 93026-47(1)(2) 470 T4 0.9 5 50 12 - 55 +6 + 10 2750 93026-48(1)(2) Note * Part number definitions: (1) Capacitance tolerance. K = 10 %, M = 20 % (2) Case or body insulation. S = Sleeved, U = Unsleeved Revision: 01-Feb-12 Document Number: 40136 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DSCC 93026 www.vishay.com Vishay STANDARD RATINGS MAX. DCL (A) MAX. IMP. AT - 55 C 120 Hz () MAX. CAPACITANCE CHANGE (%) AC RIPPLE 85 C 40 kHz (mA) RMS CAPACITANCE AT 25 C 120 Hz (F) CASE CODE MAX. ESR 120 Hz () 25 C 15 T1 3.5 1 5 125 - 18 +3 + 10 1050 93026-49(1)(2) 68 T2 2.1 2 10 37 - 30 +4 + 12 1650 93026-50(1)(2) 85 C/ 125 C - 55 C 85 C 125 C PART NUMBER 100 VDC AT 85 C; 65 VDC AT 125 C 120 L2 1.0 3 25 20.5 - 30 +4 + 12 2200 93026-62(1)(2) 150 T3 1.6 3 25 22 - 35 +6 + 12 2100 93026-51(1)(2) 220 T4 1.2 5 50 15 - 40 +6 + 12 2750 93026-52(1)(2) 125 VDC AT 85 C; 85 VDC AT 125 C 10 T1 5.5 1 5 175 - 15 +3 + 10 1050 93026-53(1)(2) 47 T2 2.3 2 10 47 - 25 +5 + 12 1650 93026-54(1)(2) 93026-63(1)(2) 90 L2 1.3 5 25 25 - 22 +4 + 15 2000 82 T3 1.8 3 25 40 - 35 +5 + 12 1950 n/a 100 T3 1.8 3 25 35 - 35 +5 + 12 2100 93026-55(1)(2) 150 T4 1.6 5 50 20 - 35 +6 + 12 2750 93026-56(1)(2) Note * Part number definitions: (1) Capacitance tolerance. K = 10 %, M = 20 % (2) Case or body insulation. S = Sleeved, U = Unsleeved RIPPLE CURRENT MULTIPLIERS VS. FREQUENCY, TEMPERATURE, AND APPLIES PEAK VOLTAGE FREQUENCY OF APPLIED RIPPLE CURRENT 120 Hz 800 Hz 1 kHz 10 kHz 40 kHz 100 kHz AMBIENT STILL 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 55 85 105 125 AIR TEMP. IN C % of 85 C rated peak voltage 100 % 0.60 0.39 - - 0.71 0.43 - - 0.72 0.46 - - 0.88 0.55 - - 1.0 0.63 - - 1.1 0.69 - 90 % 0.60 0.46 - - 0.71 0.55 - - 0.72 0.55 - - 0.88 0.67 - - 1.0 0.77 - - 1.1 0.85 - - 80 % 0.60 0.52 0.35 - 0.71 0.62 0.42 - 0.72 0.62 0.42 - 0.88 0.76 0.52 - 1.0 0.87 0.59 - 1.1 0.96 0.65 - 70 % 0.60 0.58 0.44 - 0.71 0.69 0.52 - 0.72 0.70 0.52 - 0.88 0.85 0.64 - 1.0 0.97 0.73 - 1.1 1.07 0.80 - - 66 2/3 % 0.60 0.60 0.46 0.27 0.71 0.71 0.55 0.32 0.72 0.72 0.55 0.32 0.88 0.88 0.68 0.40 1.0 1.0 0.77 0.45 1.1 1.1 0.85 0.50 Revision: 01-Feb-12 Document Number: 40136 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000