1N4001S THRU 1N4007S
PLASTIC SILICON RECTIFIER
VOLTAGE - 50 to 1000 Volts CURRENT - 1.0 Ampere
FEATURES
l Low forward voltage drop
l High current capability
l High reliability
l High surge current capability
l 0.6mm leads
l Exceeds environmental standards of MIL-S-19500/228
MECHANICAL DATA
Case: Molded plastic , A-405
Epoxy: UL 94V-O rate flame retardant
Lead: Axial leads, solderable per MIL-STD-202,
method 208 guaranteed
Polarity: Color band denotes cathode end
Mounting Position: Any
Weight: 0.008 ounce, 0.22 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
1N4001S
1N4002S
1N4003S
1N4004S
1N4005S
1N4006S
1N4007S
UNITS
Maximum Recurrent Peak Reverse Voltage
50 100 200 400 600 800 1000 V
Maximum RMS Voltage 35 75 140 280 420 560 700 V
Maximum DC Blocking Voltage 50 100 200 400 600 800 1000 V
Maximum Average Forward Rectified
Current @TA=75 1.0 A
Peak Forward Surge Current 8.3ms single
half sine-wave IFSM superimposed on rated
load
30 A
Maximum Forward Voltage at 1.0A DC 1.1 V
Maximum DC Reverse Current @TA=25
At Rated DC Blocking Voltage @TA=100 5.0
500 A
A
Typical Junction capacitance (Note 1) 15 PF
Typical Thermal Resistance (Note 2) RJA 50 /W
Typical Thermal resistance (NOTE 2) RJL
25 /W
Operating Temperature Range TJ -55 to +150
Storage Temperature Range TA -55 to +150
A-405
NOTES:
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC
2. Thermal resistance Junction to Ambient and from junction to lead at 0.375"(9.5mm) lead length P.C.B mounted
RATING AND CHARACTERISTIC CURVES
1N4001S THRU 1N4007S
Fig. 1-TYPICAL FORWARD CURRENT DERATING CURVE
Fig. 2-TYPICAL FORWARD CHARACTERISTICS Fig. 3-MAXIMUM NON-REPETITIVE FORWARD
SURGE CURRENT
Fig. 4-TYPICAL REVERSE CHARACTERISTICS Fig. 5-TYPICAL REVERSE CHARACTERISTICS
