SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 D Meets or Exceeds TIA/EIA-232-F and ITU D D D D D D D D MAX232 . . . D, DW, N, OR NS PACKAGE MAX232I . . . D, DW, OR N PACKAGE (TOP VIEW) Recommendation V.28 Operates From a Single 5-V Power Supply With 1.0-mF Charge-Pump Capacitors Operates Up To 120 kbit/s Two Drivers and Two Receivers 30-V Input Levels Low Supply Current . . . 8 mA Typical ESD Protection Exceeds JESD 22 - 2000-V Human-Body Model (A114-A) Upgrade With Improved ESD (15-kV HBM) and 0.1-mF Charge-Pump Capacitors is Available With the MAX202 Applications - TIA/EIA-232-F, Battery-Powered Systems, Terminals, Modems, and Computers C1+ VS+ C1- C2+ C2- VS- T2OUT R2IN 1 16 2 15 3 14 4 13 5 12 6 11 7 10 8 9 VCC GND T1OUT R1IN R1OUT T1IN T2IN R2OUT description/ordering information The MAX232 is a dual driver/receiver that includes a capacitive voltage generator to supply TIA/EIA-232-F voltage levels from a single 5-V supply. Each receiver converts TIA/EIA-232-F inputs to 5-V TTL/CMOS levels. These receivers have a typical threshold of 1.3 V, a typical hysteresis of 0.5 V, and can accept 30-V inputs. Each driver converts TTL/CMOS input levels into TIA/EIA-232-F levels. The driver, receiver, and voltage-generator functions are available as cells in the Texas Instruments LinASIC library. ORDERING INFORMATION PDIP (N) TOP-SIDE MARKING Tube of 25 MAX232N Tube of 40 MAX232D Reel of 2500 MAX232DR Tube of 40 MAX232DW Reel of 2000 MAX232DWR SOP (NS) Reel of 2000 MAX232NSR MAX232 PDIP (N) Tube of 25 MAX232IN MAX232IN Tube of 40 MAX232ID Reel of 2500 MAX232IDR Tube of 40 MAX232IDW Reel of 2000 MAX232IDWR SOIC (D) 0C to 70C SOIC (DW) -40C -40 C to 85 85C C ORDERABLE PART NUMBER PACKAGE TA SOIC (D) SOIC (DW) MAX232N MAX232 MAX232 MAX232I MAX232I Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. LinASIC is a trademark of Texas Instruments. Copyright 2004, Texas Instruments Incorporated !"# $"%&! '#( '"! ! $#!! $# )# # #* "# '' +,( '"! $!#- '# #!#&, !&"'# #- && $##( POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 Function Tables EACH DRIVER INPUT TIN OUTPUT TOUT L H H L H = high level, L = low level EACH RECEIVER INPUT RIN OUTPUT ROUT L H H L H = high level, L = low level logic diagram (positive logic) 11 14 T1IN T1OUT 10 7 T2IN T2OUT 12 13 R1OUT R1IN 9 R2OUT 2 POST OFFICE BOX 655303 8 R2IN * DALLAS, TEXAS 75265 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Input supply voltage range, VCC (see Note 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to 6 V Positive output supply voltage range, VS+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC - 0.3 V to 15 V Negative output supply voltage range, VS- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to -15 V Input voltage range, VI: Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to VCC + 0.3 V Receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 V Output voltage range, VO: T1OUT, T2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VS- - 0.3 V to VS+ + 0.3 V R1OUT, R2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3 V to VCC + 0.3 V Short-circuit duration: T1OUT, T2OUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 2 and 3): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73C/W DW package . . . . . . . . . . . . . . . . . . . . . . . . . . 57C/W N package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67C/W NS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 64C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltages are with respect to network GND. 2. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 3. The package thermal impedance is calculated in accordance with JESD 51-7. recommended operating conditions VCC VIH Supply voltage VIL R1IN, R2IN Low-level input voltage (T1IN, T2IN) TA High-level input voltage (T1IN,T2IN) MIN NOM MAX 4.5 5 5.5 2 V V Receiver input voltage Operating free-air temperature UNIT 0.8 V 30 V MAX232 0 70 MAX232I -40 85 C electrical characteristics over recommended ranges of supply voltage and operating free-air temperature (unless otherwise noted) (see Note 4 and Figure 4) PARAMETER ICC TEST CONDITIONS VCC = 5.5 V, TA = 25C Supply current All outputs open, MIN TYP MAX 8 10 UNIT mA All typical values are at VCC = 5 V and TA = 25C. NOTE 4: Test conditions are C1-C4 = 1 F at VCC = 5 V 0.5 V. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 DRIVER SECTION electrical characteristics over recommended ranges of supply voltage and operating free-air temperature range (see Note 4) PARAMETER TEST CONDITIONS VOH High-level output voltage T1OUT, T2OUT RL = 3 k to GND VOL Low-level output voltage T1OUT, T2OUT RL = 3 k to GND MIN 5 TYP MAX 7 -7 UNIT V -5 V Output resistance T1OUT, T2OUT VS+ = VS- = 0, VO = 2 V 300 IOS Short-circuit output current T1OUT, T2OUT VCC = 5.5 V, VO = 0 10 mA IIS Short-circuit input current T1IN, T2IN VI = 0 200 A All typical values are at VCC = 5 V, TA = 25C. The algebraic convention, in which the least-positive (most negative) value is designated minimum, is used in this data sheet for logic voltage levels only. Not more than one output should be shorted at a time. NOTE 4: Test conditions are C1-C4 = 1 F at VCC = 5 V 0.5 V. ro switching characteristics, VCC = 5 V, TA = 25C (see Note 4) PARAMETER TEST CONDITIONS SR Driver slew rate RL = 3 k to 7 k, See Figure 2 SR(t) Driver transition region slew rate See Figure 3 Data rate One TOUT switching MIN TYP MAX UNIT 30 V/s 3 V/s 120 kbit/s NOTE 4: Test conditions are C1-C4 = 1 F at VCC = 5 V 0.5 V. RECEIVER SECTION electrical characteristics over recommended ranges of supply voltage and operating free-air temperature range (see Note 4) PARAMETER TEST CONDITIONS VOH High-level output voltage R1OUT, R2OUT IOH = -1 mA VOL Low-level output voltage R1OUT, R2OUT IOL = 3.2 mA VIT+ Receiver positive-going input threshold voltage R1IN, R2IN VCC = 5 V, TA = 25C VIT- Receiver negative-going input threshold voltage R1IN, R2IN VCC = 5 V, TA = 25C MIN TYP MAX 3.5 V 1.7 0.8 UNIT 0.4 V 2.4 V 1.2 V Vhys Input hysteresis voltage R1IN, R2IN VCC = 5 V 0.2 0.5 1 V ri Receiver input resistance R1IN, R2IN VCC = 5, TA = 25C 3 5 7 k All typical values are at VCC = 5 V, TA = 25C. The algebraic convention, in which the least-positive (most negative) value is designated minimum, is used in this data sheet for logic voltage levels only. NOTE 4: Test conditions are C1-C4 = 1 F at VCC = 5 V 0.5 V. switching characteristics, VCC = 5 V, TA = 25C (see Note 4 and Figure 1) PARAMETER tPLH(R) tPHL(R) TYP UNIT Receiver propagation delay time, low- to high-level output 500 ns Receiver propagation delay time, high- to low-level output 500 ns NOTE 4: Test conditions are C1-C4 = 1 F at VCC = 5 V 0.5 V. 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 PARAMETER MEASUREMENT INFORMATION VCC Pulse Generator (see Note A) RL = 1.3 k R1OUT or R2OUT R1IN or R2IN See Note C CL = 50 pF (see Note B) TEST CIRCUIT 10 ns 10 ns Input 10% 90% 50% 90% 50% 3V 10% 0V 500 ns tPLH tPHL VOH Output 1.5 V 1.5 V VOL WAVEFORMS NOTES: A. The pulse generator has the following characteristics: ZO = 50 , duty cycle 50%. B. CL includes probe and jig capacitance. C. All diodes are 1N3064 or equivalent. Figure 1. Receiver Test Circuit and Waveforms for tPHL and tPLH Measurements POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 5 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 PARAMETER MEASUREMENT INFORMATION T1IN or T2IN Pulse Generator (see Note A) T1OUT or T2OUT EIA-232 Output CL = 10 pF (see Note B) RL TEST CIRCUIT 10 ns 10 ns 90% 50% Input 10% 3V 90% 50% 10% 0V 5 s tPLH tPHL 90% Output VOH 90% 10% 10% VOL tTLH tTHL 0.8 (V SR + -V ) 0.8 (V -V ) OH OL OL OH or t t TLH THL WAVEFORMS NOTES: A. The pulse generator has the following characteristics: ZO = 50 , duty cycle 50%. B. CL includes probe and jig capacitance. Figure 2. Driver Test Circuit and Waveforms for tPHL and tPLH Measurements (5-s Input) Pulse Generator (see Note A) EIA-232 Output 3 k CL = 2.5 nF TEST CIRCUIT 10 ns 10 ns Input 90% 1.5 V 10% 90% 1.5 V 10% 20 s tTLH tTHL Output 3V 3V -3 V -3 V SR + t THL 6V or t VOH VOL TLH WAVEFORMS NOTE A: The pulse generator has the following characteristics: ZO = 50 , duty cycle 50%. Figure 3. Test Circuit and Waveforms for tTHL and tTLH Measurements (20-s Input) 6 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 SLLS047L - FEBRUARY 1989 - REVISED MARCH 2004 APPLICATION INFORMATION 5V CBYPASS =1F + - 16 C1 C1+ 1 F 3 From CMOS or TTL To CMOS or TTL 8.5 V 1 F 5 6 VS- C2+ 1 F 2 VS+ C1- 4 C2 C3 VCC 1 -8.5 V C4 + C2- 11 14 10 7 12 13 8 9 0V 1 F EIA-232 Output EIA-232 Output EIA-232 Input EIA-232 Input 15 GND C3 can be connected to VCC or GND. NOTES: A. Resistor values shown are nominal. B. Nonpolarized ceramic capacitors are acceptable. If polarized tantalum or electrolytic capacitors are used, they should be connected as shown. In addition to the 1-F capacitors shown, the MAX202 can operate with 0.1-F capacitors. Figure 4. Typical Operating Circuit POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 7 PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 PACKAGING INFORMATION Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MAX232D ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DWE4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232DWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232ID ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDE4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDG4 ACTIVE SOIC D 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDR ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDRE4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDRG4 ACTIVE SOIC D 16 2500 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDW ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDWE4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDWG4 ACTIVE SOIC DW 16 40 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDWR ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDWRE4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IDWRG4 ACTIVE SOIC DW 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232IN ACTIVE PDIP N 16 CU NIPDAU N / A for Pkg Type 25 Addendum-Page 1 Pb-Free (RoHS) Lead/Ball Finish MSL Peak Temp (3) PACKAGE OPTION ADDENDUM www.ti.com 4-Jun-2007 Orderable Device Status (1) Package Type Package Drawing Pins Package Eco Plan (2) Qty MAX232INE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MAX232N ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MAX232NE4 ACTIVE PDIP N 16 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type MAX232NSR ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232NSRE4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM MAX232NSRG4 ACTIVE SO NS 16 2000 Green (RoHS & no Sb/Br) CU NIPDAU Level-1-260C-UNLIM Lead/Ball Finish MSL Peak Temp (3) (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 TAPE AND REEL INFORMATION *All dimensions are nominal Device Package Package Pins Type Drawing MAX232DR SOIC SPQ Reel Reel A0 Diameter Width (mm) (mm) W1 (mm) D 16 2500 330.0 16.4 B0 (mm) K0 (mm) P1 (mm) W Pin1 (mm) Quadrant 6.5 10.3 2.1 8.0 16.0 Q1 MAX232DR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MAX232DWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 MAX232DWRG4 SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 MAX232IDR SOIC D 16 2500 330.0 16.4 6.5 10.3 2.1 8.0 16.0 Q1 MAX232IDWR SOIC DW 16 2000 330.0 16.4 10.75 10.7 2.7 12.0 16.0 Q1 MAX232NSR SO NS 16 2000 330.0 16.4 8.2 10.5 2.5 12.0 16.0 Q1 Pack Materials-Page 1 PACKAGE MATERIALS INFORMATION www.ti.com 14-Jul-2012 *All dimensions are nominal Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm) MAX232DR SOIC D 16 2500 367.0 367.0 38.0 MAX232DR SOIC D 16 2500 333.2 345.9 28.6 MAX232DWR SOIC DW 16 2000 366.0 364.0 50.0 MAX232DWRG4 SOIC DW 16 2000 367.0 367.0 38.0 MAX232IDR SOIC D 16 2500 333.2 345.9 28.6 MAX232IDWR SOIC DW 16 2000 366.0 364.0 50.0 MAX232NSR SO NS 16 2000 367.0 367.0 38.0 Pack Materials-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46C and to discontinue any product or service per JESD48B. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Mobile Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated