2N6660C4A-JQRS.CVP - Semelab Plc.

N-CHANNEL ENHANCEMENT

MODE POWER MOSFET

Semelab Limited reserves the right to change test conditions, parameter limits and package dimensions without notice.

Information furnished by Semelab is believed to be both accurate and reliable at the time of going to press. However

Semelab assumes no responsibility for any errors or omissions discovered in its use. Semelab encourages customers to

verify that datasheets are current before placing orders.

Semelab Limited

Semelab LimitedSemelab Limited

Semelab Limited

Coventry Road, Lutterworth, Leicestershire, LE17 4JB

Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com

Document Number 8382

Issue 1

Page 1 of 4

2N6660C4

• VDSS = 60V , ID = 1.0A, RDS(ON) = 3.0Ω

• Fast Switching

• Low Threshold Voltage (Logic Level)

• Low CISS

• Integral Source-Drain Body Diode

• Hermetic Surface Mounted Package

• High Reliability Screening Options Available

ABSOLUTE MAXIMUM RATINGS

(TC = 25°C unless otherwise stated)

VDS Drain – Source Voltage 60V

VGS Gate – Source Voltage ±20V

ID Continuous Drain Current TC = 25°C 1.0A

IDM Pulsed Drain Current

(1)

3.0A

PD Total Power Dissipation at TC ≤ 25°C 5W

De-rate TC > 25°C 40mW/°C

PD Total Power Dissipation at TA ≤ 25°C 700mW

De-rate TA > 25°C 5.6mW/°C

TJ Operating Temperature Range -65 to +150°C

Tstg Storage Temperature Range -65 to +150°C

THERMAL PROPERTIES

Symbols Parameters Min. Typ. Max. Units

RθJC

Thermal Resistance, Junction To Case 25 °C/W

RθJA

Thermal Resistance, Junction To Ambient 178.5 °C/W

Notes

NotesNotes

Notes

(1) Repetitive Rating: Pulse width limited by maximum junction temperature

(2) Pulse Width ≤ 300us, δ ≤ 2%

N-CHANNEL ENHANCEMENT

MODE POWER MOSFET

2N6660C4

Semelab Limited

Semelab LimitedSemelab Limited

Semelab Limited

Coventry Road, Lutterworth, Leicestershire, LE17 4JB

Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com

Document Number 8382

Issue 1

Page 2 of 4

ELECTRICAL CHARACTERISTICS

(TC = 25°C unless otherwise stated)

Symbols Parameters Test Conditions Min.

Typ. Max.

Units

BVDSS Drain-Source Breakdown

Voltage VGS = 0 ID = 1.0µA 60 V

VDS = VGS ID = 1.0mA 0.8 2

TC = 125°C 0.3

VGS(th) Gate Threshold Voltage

TC = -55°C 2.5

VGS = ±20V VDS = 0V ±100

IGSS Gate-Source Leakage Current

TC = 125°C ±500

VGS = 0 VDS = 48V 1.0

IDSS Zero Gate Voltage

Drain Current TC = 125°C 100

µA

ID(ON)

(2)

On-State Drain Current VDS = 10V VGS = 10V 1.5 A

VGS = 5V ID = 0.3A 5

VGS = 10V ID = 1.0A 3

RDS(on)

(2)

Static Drain-Source

On-State Resistance

TC = 125°C 5

Ω

gfs

(2)

Forward Transconductance VDS = 7.5V ID = 525mA 170 mƱ

VSD

(2)

Body Diode Forward Voltage VGS = 0 IS = 1.0A 0.7 1.6 V

trr

(2)

Body Diode Reverse Recovery VGS = 0 IS = 1.0A 350 ns

DYNAMIC CHARACTERISTICS

Ciss Input Capacitance VGS = 0 50

Coss Output Capacitance VDS = 25V 40

Crss Reverse Transfer Capacitance f = 1.0MHz 10

td(on) Turn-On Delay Time VDD = 25V 10

td(off) Turn-Off Delay Time ID = 1.0A RG = 50Ω 10

N-CHANNEL ENHANCEMENT

MODE POWER MOSFET

2N6660C4

Semelab Limited

Semelab LimitedSemelab Limited

Semelab Limited

Coventry Road, Lutterworth, Leicestershire, LE17 4JB

Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com

Document Number 8382

Issue 1

Page 3 of 4

MECHANICAL DATA

Dimensions in mm (inches)

Underside View

PACKAGE VARIANT TABLE

Variant Pads Connection

Pads 6, 7, 8, 9, 10, 11, 12, 13 Source

Pads 4, 5 Gate

Pads 1, 2, 15, 16, 17, 18 Drain

Pads 3, 14 Not Connected

1.39 (0.055)

1.15 (0.045)

0.76 (0.030)

0.51 (0.020)

1.39 (0.055)

1.02 (0.040)

15 16

12 14

9.14 (0.360)

8.64 (0.340)

1.27 (0.050)

1.07 (0.040) ≈2.16 (0.085)

7.62 (0.300)

7.12 (0.280)

1.65 (0.065)

1.40 (0.055)

0.33 (0.013)

0.08 (0.003)

0.43 (0.017)

0.18 (0.007

Rad.

N-CHANNEL ENHANCEMENT

MODE POWER MOSFET

2N6660C4

Semelab Limited

Semelab LimitedSemelab Limited

Semelab Limited

Coventry Road, Lutterworth, Leicestershire, LE17 4JB

Telephone +44 (0) 1455 556565 Fax +44 (0) 1455 552612 Email: sales@semelab-tt.com Website: http://www.semelab-tt.com

Document Number 8382

Issue 1

Page 4 of 4

SCREENING OPTIONS

Space Level (JQRS/ESA) and High Reliability options are

available in accordance with the High Reliability and

Screening Options Handbook available for download from

the from the TT electronics Semelab web site.

ESA Quality Level Products are based on the testing

procedures specified in the generic ESCC 5000 and in the

corresponding part detail specifications.

Semelabs QR216 and QR217 processing specifications

(JQRS), in conjunction with the companies ISO 9001:2000

approval present a viable alternative to the American MIL-

PRF-19500 space level processing.

QR217 (Space Level Quality Conformance) is based on the

quality conformance inspection requirements of MIL-PRF-

19500 groups A (table V), B (table VIa), C (table VII) and

also ESA / ESCC 5000 (chart F4) lot validation tests.

QR216 (Space Level Screening) is based on the screening

requirements of MIL-PRF-19500 (table IV) and also ESA

/ESCC 5000 (chart F3).

JQRS parts are processed to the device data sheet and

screened to QR216 with conformance testing to Q217

groups A and B in accordance with MIL-STD-750 methods

and procedures.

Additional conformance options are available, for example

Pre-Cap Visual Inspection, Buy-Off Visit or Data Packs.

These are chargeable and must be specified at the order

stage (See Ordering Information). Minimum order

quantities may apply.

Alternative or additional customer specific conformance or

screening requirements would be considered. Contact

Semelab sales with enquires.

MARKING DETAILS

Parts are typically marked with specification number, serial

number (or week of seal) as shown in the example below. .

Customer specific marking requirements can be arranged at

time of order but is approximately limited to three lines of

10 Characters. This is to ensure text remains readable.

Example Marking:

ORDERING INFORMATION

Part number is built from part, package variant and

screening level. The part number can be extended to

include the additional options as shown below.

Type – See Electrical Stability Characteristics Table

Package Variant – See Mechanical Data

Screening Level – See Screening Options (ESA / JQRS)

Additional Options:

Customer Pre-Cap Visual Inspection .CVP

Customer Buy-Off visit .CVB

Data Pack .DA

Solderability Samples .SS

Scanning Electron Microscopy .SEM

Radiography (X-ray) .XRAY

Total Dose Radiation Test .RAD

MIL-PRF-19500 (QR217)

Group B charge .GRPB

Group B destructive mechanical samples .GBDM (12 pieces)

Group C charge .GRPC

Group C destructive electrical samples .GCDE (12 pieces)

Group C destructive mechanical samples .GCDM (6 pieces)

ESA/ESCC

Lot Validation Testing (subgroup 1) charge .LVT1

LVT1 destructive samples (environmental) .L1DE (15 pieces)

LVT1 destructive samples (mechanical) .L1DM (15 pieces)

Lot Validation Testing (subgroup 2) charge .LVT2

LVT2 endurance samples (electrical) .L2D (15 pieces)

Lot Validation Testing (subgroup 3) charge .LVT3

LVT3 destructive samples (mechanical) .L3D (5 pieces)

Additional Option Notes:

1) All ‘Additional Options’ are chargeable and must be specified at order stage.

2) When Group B,C or LVT is required, additional electrical and mechanical destructive

samples must be ordered

3) All destructive samples are marked the same as other production parts unless

otherwise requested.

Example ordering information:

The following example is for the 2N6660C4 part, package

variant A, JQRS screening, additional Group C conformance

testing and a Data pack.

Part Numbers:

2N6660C4A-JQRS

(Include quantity for flight parts)

2N6660C4A-JQRS.GRPC

(chargeable conformance option)

2N6660C4A-JQRS.GCDE

(charge for destructive parts)

2N6660C4A-JQRS.GCDM

(charge for destructive parts)

2N6660C4A-JQRS.DA

(charge for Data pack)

Customers with any specific requirements (e.g. marking,

package or screening) may be supplied with a similar

alternative part number (there is maximum 20 character

limit to part numbers). Contact Semelab sales with all

enquiries