MBRF1030CT- MBRF1060CT Green 10A SCHOTTKY BARRIER RECTIFIER Product Summary Features and Benefits MBRF1030CT - MBRF1045CT (Per Leg) VRRM (V) IO (A) 30 - 45 5 VF (MAX) (V) @ +25C 0.65 IR (MAX) (mA) @ +25C 0.1 MBRF1050CT - MBRF1060CT (Per Leg) VRRM (V) IO (A) VF (MAX) (V) @ +25C IR (MAX) (mA) @ +25C 50 - 60 5 0.75 0.1 Guard Ring Die Construction for Transient Protection High Surge Current Capability Low Forward Voltage Drop Lead-Free Finish; RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) Qualified to AEC-Q101 Standards for High Reliability Mechanical Data Description and Applications This Schottky Barrier Rectifier has been designed to meet the general requirements of commercial applications. It is ideally suited for use as: Case: ITO-220AB Case Material: Molded Plastic, "Green" Molding compound. UL Flammability Classification Rating 94V-0 Moisture Sensitivity: Level 1 per J-STD-020 Terminals: Finish - Matte Tin annealed over Copper leadframe. Polarity Protection Diode Re-Circulating Diode Polarity: As Marked on Body Switching Diode Weight: ITO-220AB - 1.69 grams (approximate) Solderable per MIL-STD-202, Method 208 ITO-220AB Top View Ordering Information Package Pin Out Configuration (Note 4) Device MBRF1040CT-JT MBRF1045CT-JT MBRF1060CT-JT Notes: ITO-220AB Bottom View Packaging ITO-200AB (Alternate) ITO-200AB (Alternate) ITO-200AB (Alternate) Shipping 50/Tube 50/Tube 50/Tube 1. EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. All applicable RoHS exemptions applied. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 4. For packaging details, go to our website at http://www.diodes.com/products/packages.html. Marking Information MBRF10xxCT = Product Type Marking Code AB = Foundry and Assembly Code YYWW = Date Code Marking YY = Last two digits of year (ex: 13 = 2013) WW = Week (01 - 53) MBRF10xxCT YYWW AB MBRF1030CT-MBRF1060CT Document number: DS35378 Rev. 5 - 2 1 of 4 www.diodes.com October 2013 (c) Diodes Incorporated MBRF1030CT- MBRF1060CT Maximum Ratings (Per Leg) (@TA = +25C, unless otherwise specified.) Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. Characteristic Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage RMS Reverse Voltage Average Rectified Output Current (Note 5) (Per Leg) (Total) Non-Repetitive Peak Forward Surge Current 8.3ms Single Half Sine-Wave Superimposed on Rated Load Symbol MBRF 1030CT MBRF 1040CT MBRF 1045CT MBRF 1050CT MBRF 1060CT Unit VRRM VRWM VR 30 40 45 50 60 V VR(RMS) 21 28 31.5 35 42 V IO 5 10 A IFSM 100 A Thermal Characteristics (Per Leg) Characteristic Symbol Value Unit RJC 5 K/W TJ, TSTG -55 to +150 C Typical Thermal Resistance Junction to Case (Note 5) Operating and Storage Temperature Range Electrical Characteristics (Per Leg) (@TA = +25C, unless otherwise specified.) Characteristic Forward Voltage Drop Maximum Symbol @ IF = 5.0A, TC = +125C @ IF = 5.0A, TC = +25C Peak Reverse Current Maximum at Rated DC Blocking Voltage (Note 6) @ TC = +25C @ TC = +125C MBRF 1040CT MBRF 1045CT MBRF 1050CT 0.55 0.65 VFM Typical Total Capacitance (Note 7) MBRF 1060CT Unit 0.65 0.75 V IRM 0.1 15 mA CT 150 pF 5. Device mounted on Device with additional heat sink (45mm X 20mm X 12mm), with minimum recommended pad layout per http://www.diodes.com 6. Short duration pulse test used to minimize self-heating effect. 7. Measured at 1.0 MHz and applied reverse voltage of 4.0V DC and per element. I(AV), AVERAGE FORZWARD CURRENT (A) 10 Total Device IF , INSTANTANEOUS FORWARD CURRENT (A) Notes: MBRF 1030CT 8 6 Per Element 4 2 0 0 50 100 TC, CASE TEMPERATURE ( C) Figure 1 Forward Current Derating Curve MBRF1030CT-MBRF1060CT Document number: DS35378 Rev. 5 - 2 150 2 of 4 www.diodes.com 100 MBRF1030CT - MBRF1045CT 10 TJ = 150C TJ = 125C 1 TJ = 100C 0.1 TJ = 75C TJ = 25C T J = -55C 0.01 0.2 0.4 0.6 0.8 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 2 Typical Forward Characteristics, per Element October 2013 (c) Diodes Incorporated MBRF1050CT - MBRF1060CT TJ = 150C 10 T J = 125C 1 TJ = 100C T J = 75C 0.1 TJ = 25C TJ = -55C 0.01 0.2 0.4 0.6 0.8 1.0 VF, INSTANTANEOUS FORWARD VOLTAGE (V) Figure 3 Typical Forward Characteristics, per Element IR, INSTANTANEOUS REVERSE CURRENT (mA) 100 100 MBRF1030CT - MBRF1045CT 10 TJ = 150C T J = 125C TJ = 100C 1 T J = 75C 0.1 TJ = 25C 0.01 0.001 20 40 60 80 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE (%) Figure 4 Typical Reverse Characteristics, per Element 100 600 MBRF1050CT - MBRF1060CT TJ = 150C 500 10 CT, TOTAL CAPACITANCE (pF) IR, INSTANTANEOUS REVERSE CURRENT (mA) IF, INSTANTANEOUS FORWARD CURRENT (A) MBRF1030CT- MBRF1060CT TJ = 125C TJ = 100C 1 T J = 75C 0.1 TJ = 25C 0.01 400 300 200 100 TJ = 25 C f = 1.0MHz 0.001 20 40 60 80 100 PERCENTAGE RATED PEAK REVERSE VOLTAGE (%) Figure 5 Typical Reverse Characteristics, per Element 0 0 1 10 100 VR, REVERSE VOLTAGE (V) Figure 6 Typical Capacitance, per Element Package Outline Dimensions Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version. A E A1 OP Q ITO-220AB Alternate Dim Min Max A 4.36 4.77 A1 2.54 3.1 A2 2.54 2.8 b 0.55 0.75 b1 1.2 1.5 c 0.38 0.68 D 14.5 15.5 D1 8.38 8.89 E 9.72 10.27 e 2.41 2.67 L 9.87 10.67 L1 15.8 17 OP 3.08 3.39 Q 2.6 3.0 All Dimensions in mm + D L1 D1 A2 b1 L b c e MBRF1030CT-MBRF1060CT Document number: DS35378 Rev. 5 - 2 3 of 4 www.diodes.com October 2013 (c) Diodes Incorporated MBRF1030CT- MBRF1060CT IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2013, Diodes Incorporated www.diodes.com MBRF1030CT-MBRF1060CT Document number: DS35378 Rev. 5 - 2 4 of 4 www.diodes.com October 2013 (c) Diodes Incorporated Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Diodes Incorporated: MBRF1060CT-JT