Crimp-Validation product: DELPHI PN 13580652 material: surface: material thickness: CUNI3SI1MG AU 0,25 mm cross section [mm]: 0,5 | 0,75 strip length: 3,40 mm cable type: insulation o [mm]: FLRY-B 1,40 - 1,90 seal: DPN 15327918 VERSION I conductor dimension cable type cross sect. [mm] struct. nxd [mm] FLRY-B FLRY-B 0,5 0,75 16 x 0,21 24 x 0,21 crimp dimension [mm] insul. tear-out core insulation diam. force height width height width height [mm] [N] 0,05 0,10 0,10 0,10 tol. 1,50 1,80 80 120 1,05 1,15 1,65 1,65 3,00 3,10 3,05 3,10 width tol. core: C-1.60-2.5-12 DPN 10713783 insulation: IS-3.00-3.0-12 DPN 10713804 anvil: two piece anvil: AC-1.60-2.75-A DPN 10764132 AI-3.00-3.8-0.6 DPN 10764215 Date: Date Rev.: 07.12.2006 19.11.2010 Rev.-No.: 02 Record-No. 15882 page 1 / 2 Approved by: DELPHI WUPPERTAL / PETP / PETRA WITT Owner: DELPHI GERMANY Crimp-Validation DELPHI PN 13580652 cable: 0,50 mm = 16 x 0,21 mm crimp height: 1,05 mm crimp width: 1,65 mm cable: 0,75 mm = 24 x 0,21 mm crimp height: 1,15 mm crimp width: 1,65 mm Date: Date Rev.: 07.12.2006 19.11.2010 Rev.-No.: 02 Record-No. 15882 page 2 / 2 Approved by: DELPHI WUPPERTAL / PETP / PETRA WITT Owner: DELPHI GERMANY