MX857BTR - IXYS Integrated Circuits Division

INTEGRATED CIRCUITS DIVISION

DS-MX856/MX857-R01 www.ixysic.com 1

Characteristics

Features

•CMOS Technology

•TTL/CMOS Compatible Inputs

•Low Switching Noise

•5nS Typical True / Complement Output Skew

•5nS Typical Output Rise and Fall Times

•Up to 20V Output Voltage

•Output High Voltage Programmable Via VOPT

•Output Low Voltage Programmable Via VEE

Applications

•Digital Control of Analog Circuits

•Level Shifting and Amplification

•Circuit Applications Requiring Complementary

Signal Generation with Low Skew

•Bias Control for PIN Diode Drivers in a Microwave

Switch

Description

The MX856 and MX857 are high speed,

single-channel level shifters with complementary

output drivers. The MX856 features a 5.0V VCC

positive supply, and the MX857 features a 3.3V VCC

positive supply.

The input buffers accept digital TTL or CMOS level

signals, amplifies them to the VCC and GND supply

rails, and generates complementary outputs. The

translator level shifts these output signals by

amplifying them to the VCC and VEE supply rails.

The output drivers then buffer the signals to VOPT and

VEE. VOPT may be set within the range of VCC and

GND. The output drivers also adjust the

complementary signals for minimized skew error.

The MX856 and MX857 are designed to operate over

a temperature range of -40°C to +85°C, and are

available in an 8-lead SOIC package.

Ordering Information

Functional Block Diagram

Parameter Rating Units

Output Voltage 20 V

Output Rise Time 5 ns

Output Fall Time 5 ns

Part Description

MX856B 8-Lead SOIC (100/Tube)

MX856BTR 8-Lead SOIC, Tape&Reel (1000/Reel)

MX857B 8-Lead SOIC (100/Tube)

MX857BTR 8-Lead SOIC, Tape&Reel (1000/Reel)

Input Buffer Translator Output Buffer

VCC VCC VCC

VEE VEE

VOPT

GNDGND

OUT

OUT_B

MX856/MX857

Single Driver for Attenuators

and GaAs FET Switches

INTEGRATED CIRCUITS DIVISION

MX856/MX857

2www.ixysic.com R01

1. Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.1 Package Pinout. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.2 Pin Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.3 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

1.4 MX856: Guaranteed Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.5 MX857: Guaranteed Operating Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.6 DC Electrical Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

1.7 ESD Warning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

1.8 AC Electrical Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

2. Manufacturing Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.1 Moisture Sensitivity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.2 ESD Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.3 Reflow Profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

2.4 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

INTEGRATED CIRCUITS DIVISION

MX856/MX857

R01 www.ixysic.com 3

1 Specifications

1.1 Package Pinout

1.2 Pin Description

1.3 Absolute Maximum Ratings

Absolute maximum electrical ratings are at 25°C

Absolute maximum ratings are stress ratings. Stresses in

excess of these ratings can cause permanent damage to

the device. Functional operation of the device at conditions

beyond those indicated in the operational sections of this

data sheet is not implied.

OUT

GND

VCC

OUT_B

GND

VOPT

VEE

Pin# Name Description

1OUT

Output Driver

2GND

Ground

3VCC Positive Supply for Input Buffer

4IN

Input Buffer

5VEE Negative Supply for Output Driver

6VOPT Positive Supply for Output Driver

7GND

Ground

8OUT_B

Complementary Output Driver

Parameter Symbol Min Max Units

Positive DC Supply Voltage VCC -0.4 6 V

Negative DC Supply Voltage VEE -17 0.4 V

Output Positive DC Supply Voltage VOPT -6V

Output Positive to Negative Supply Voltage VOPT -VEE -0.4 20 V

Positive to Negative Supply Voltage VCC-VEE -0.4 14 V

Positive to Output Supply Voltage VCC-VOPT -0.4 VCC+0.4 V

DC Input Voltage VIN -0.4 VCC+0.4 V

DC Input Current IIN -10 10 A

Operating Temperature T

A-40 85 °C

Storage Temperature TSTG -65 150 °C

ESD Sensitivity (Human Body Model) ESD 1.0 - kV

INTEGRATED CIRCUITS DIVISION

MX856/MX857

4www.ixysic.com R01

1.4 MX856: Guaranteed Operating Range

1.5 MX857: Guaranteed Operating Range

1.6 DC Electrical Characteristics

Over guaranteed operating range.

Parameter Symbol Min Max Units

Positive DC Supply Voltage VCC 35.5V

Negative DC Supply Voltage VEE -15 -4.5 V

Output Positive DC Supply Voltage VOPT 05.5V

Output Positive to Negative Supply Voltage VOPT -VEE 7.5 20 V

Positive to Negative Supply Voltage VCC-VEE 7.5 20 V

Positive to Output Supply Voltage VCC-VOPT 0VCC V

Operating Temperature T

A-40 85 °C

Input Rise and Fall Time TR, TF0500ns

Parameter Symbol Min Max Units

Positive DC Supply Voltage VCC 33.6V

Negative DC Supply Voltage VEE -17 -4.5 V

Output Positive DC Supply Voltage VOPT 03.6V

Output Positive to Negative Supply Voltage VOPT -VEE 7.5 20 V

Positive to Negative Supply Voltage VCC-VEE 7.5 20 V

Positive to Output Supply Voltage VCC-VOPT 0VCC V

Operating Temperature T

A-40 85 °C

Input Rise and Fall Time TR, TF0500ns

Parameter Conditions Symbol Min Typ Max Units

Input High Voltage - VIH 2--

Input Low Voltage - VIL --0.8V

Output High Voltage (IOH=1mA) -VOH VOPT -0.1 --V

Output Low Voltage (IOL=1mA) -VOL --

VEE +0.1 V

Input Current (VIN=0.0 to VCC)-IIN -10 - 10 A

Supply Current (VIN=0 or VCC)V

CC=3.3V

ICC

-<1-

A

VCC=5V -<1-

Supply Current (VIN=0 or VCC)V

CC=3.3V

IEE

-<1-

VCC=5V -<1-

Supply Current (VIN=0 or VCC)V

CC=3.3V

IOPT

-<1-

VCC=5V -<1-

INTEGRATED CIRCUITS DIVISION

MX856/MX857

R01 www.ixysic.com 5

1.7 ESD Warning

ESD (electrostatic discharge) sensitive device. Electrostatic charges can readily accumulate on test equipment and

the human body in excess of 4000 Volts. This energy can discharge without detection. Although the MX856 / MX857

feature proprietary ESD protection circuitry, permanent damage may be sustained if subjected to high energy

electrostatic discharges. Proper ESD precautions are recommended to avoid performance degradation or loss of

functionality.

1.8 AC Electrical Characteristics

VCC=VOPT=3.3V, VEE=-16.75V or -4.5V, input rise and fall times 6ns, VIN=3.1V, VIL=0.2V, TA=-40°C to +85°C

VCC=VOPT=5V, VEE=-15V or -4.5V, input rise and fall times 6ns, VIN=4.8V, VIL=0.2V, TA=-40°C to +85°C

Parameter Conditions Symbol Min Typ Max Units

Propagation Delay (Low to High Input) VCC=3.5V

TPLH

-2229

VCC=5.0V -2429

Propagation Delay (High to Low Input) VCC=3.5V

TPHL

-2029

VCC=5.0V -2029

Output Rise Time (CLD=10pF) VCC=3.5V

TTLH

-59

VCC=5.0V -49

Output Fall Time (CLD=10pF) VCC=3.5V

TTHL

-58

VCC=5.0V -48

Delay Skew (Output A to Output B) VCC=3.5V

TSKEW

-510

VCC=5.0V -510

Input Capacitance - CIN - - 15 pF

90%

10%10%

VC C- 0.2V 90%

0.2V

6ns 6ns

50% 50%

90%

50%

10%

50%

90%

10%

50%

90%

10%

50 %

90 %

Tskew

Tphl T phl

Tskew

TplhTplh

Tlh Thl

Thl Tlh

OUT

OUTB

OPT

INTEGRATED CIRCUITS DIVISION

MX856/MX857

6www.ixysic.com R01

2 Manufacturing Information

2.1 Moisture Sensitivity

All plastic encapsulated semiconductor packages are susceptible to moisture ingression. IXYS Integrated

Circuits Division classified all of its plastic encapsulated devices for moisture sensitivity according to the

latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product

evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee

proper operation of our devices when handled according to the limitations and information in that standard as well as

to any limitations set forth in the information or standards referenced below.

Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced

product performance, reduction of operable life, and/or reduction of overall reliability.

This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to

the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.

2.2 ESD Sensitivity

This product is ESD Sensitive, and should be handled according to the industry standard

JESD-625.

2.3 Reflow Profile

This product has a maximum body temperature and time rating as shown below. All other guidelines of

J-STD-020 must be observed.

Device Moisture Sensitivity Level (MSL) Rating

MX856B / MX857B MSL 1

Device Maximum Temperature x Time

MX856B / MX857B 260°C for 30 seconds

INTEGRATED CIRCUITS DIVISION

MX856/MX857

R01 www.ixysic.com 7

2.4 Mechanical Dimensions

2.4.1 MX856B/MX857B 8-Lead SOIC Package

2.4.2 MX856BTR/MX857BTR Tape & Reel Dimensions

Dimensions

mm MIN / mm MAX

(inches MIN / inches MAX)

Recommended PCB Land Pattern

NOTES: (Unless otherwise specified)

1. Controlling dimensions: millimeters.

2. Dimensions (*) do not include mold protrusions.

3. Molded package shall conform to JEDEC standard configuration MS-012 variation AA.

1.35 / 1.75

(0.053 / 0.069)

0.53 REF

(0.021 REF)

0.10 / 0.25

(0.004 / 0.010)

4.80 / 5.00*

(0.189 / 0.197)

PIN 1

0.33 / 0.51

(0.013 / 0.020)

5.80 / 6.20

(0.228 / 0.244)

3.80 / 4.00*

(0.150 / 0.157)

1.27 BSC

(0.05 BSC)

0.40 / 1.27

(0.016 / 0.050)

0.19 / 0.25

(0.008 / 0.010)

0.25 / 0.50 @45º

(0.010 / 0.020 @45º)

0º / 8º

1.27

(0.050)

5.40

(0.213)

1.55

(0.061)

0.60

(0.024)

Embossment

Embossed Carrier

Top Cover

Tape Thickness

0.066 MAX.

(0.0026 MAX.)

330.2 DIA.

(13.00 DIA.)

3.40 REF

(0.134 REF)

=5.20 ± 0.10

=0.205 ± 0.004)

0.30 ± 0.05

(0.012 ± 0.002)

5.50 ± 0.10

(0.217 ± 0.004)

12.00 ± 0.30

(0.472 ± 0.012)

1.75 ± 0.10

(0.205 ± 0.069)

4.00 ± 0.10

(0.157 ± 0.004)

2.00 ± 0.10

(0.079 ± 0.004)

ø1.55 ± 0.05

(ø0.061 ± 0.002)

ø1.50 MIN

(ø0.059 MIN)

8.00 ± 0.10

(0.315 ± 0.004)

R0.5 TYP

(R0.02 TYP)

=6.40 ± 0.10

=0.252 ± 0.004)

4.70 REF

(0.185 REF)

1.20 REF

(0.047 REF) 70º

=2.30 ± 0.10

=0.091 ± 0.004)

1.80 ± 0.10

(0.071 ± 0.004)

NOTES:

1. A0 and B0 measured at 0.3mm above base of pocket.

2. 10 pitches cumulative tol. ±0.2mm.

DIMENSIONS

(inches)

Section B-B

Section A-A

For additional information please visit our website at: www.ixysic.com

IXYS Integrated Circuits Division makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make

changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in IXYS Integrated

Circuits Division’s Standard Terms and Conditions of Sale, IXYS Integrated Circuits Division assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its

products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right.

The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other

applications intended to support or sustain life, or where malfunction of IXYS Integrated Circuits Division’s product may result in direct physical harm, injury, or death to a person or severe

property or environmental damage. IXYS Integrated Circuits Division reserves the right to discontinue or make changes to its products at any time without notice.

Specification: DS-MX856/MX857-20110729

12/22/2012