MMBT3904L, SMMBT3904L General Purpose Transistor NPN Silicon Features * These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS * * http://onsemi.com Compliant AEC-Q101 Qualified and PPAP Capable S Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements COLLECTOR 3 1 BASE MAXIMUM RATINGS Symbol Value Unit Collector -Emitter Voltage Rating VCEO 40 Vdc Collector -Base Voltage VCBO 60 Vdc Emitter -Base Voltage VEBO 6.0 Vdc IC 200 mAdc ICM 900 mAdc Symbol Max Unit 225 1.8 mW mW/C 556 C/W 300 2.4 mW mW/C RqJA 417 C/W TJ, Tstg -55 to +150 C Collector Current - Continuous Collector Current - Peak (Note 3) THERMAL CHARACTERISTICS Characteristic Total Device Dissipation FR- 5 Board (Note 1) @TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Total Device Dissipation Alumina Substrate, (Note 2) @TA = 25C Derate above 25C Thermal Resistance, Junction-to-Ambient Junction and Storage Temperature 2 EMITTER 3 SOT-23 (TO-236) CASE 318 STYLE 6 1 2 PD RqJA MARKING DIAGRAM 1AM M G G PD 1 Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability. 1. FR-5 = 1.0 0.75 0.062 in. 2. Alumina = 0.4 0.3 0.024 in. 99.5% alumina. 3. Reference SOA curve. 1AM = Specific Device Code M = Date Code* G = Pb-Free Package (Note: Microdot may be in either location) *Date Code orientation and/or overbar may vary depending upon manufacturing location. ORDERING INFORMATION Package Shipping MMBT3904LT1G SMMBT3904LT1G SOT-23 (Pb-Free) 3000 / Tape & Reel MMBT3904LT3G SOT-23 (Pb-Free) 10,000 / Tape & Reel Device For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. (c) Semiconductor Components Industries, LLC, 2011 October, 2011 - Rev. 11 1 Publication Order Number: MMBT3904LT1/D MMBT3904L, SMMBT3904L ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Symbol Min Max Unit Collector -Emitter Breakdown Voltage (IC = 1.0 mAdc, IB = 0) V(BR)CEO 40 - Vdc Collector -Base Breakdown Voltage (IC = 10 mAdc, IE = 0) V(BR)CBO 60 - Vdc Emitter -Base Breakdown Voltage (IE = 10 mAdc, IC = 0) V(BR)EBO 6.0 - Vdc IBL - 50 nAdc ICEX - 50 nAdc 40 70 100 60 30 - - 300 - - - - 0.2 0.3 0.65 - 0.85 0.95 OFF CHARACTERISTICS Base Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) Collector Cutoff Current (VCE = 30 Vdc, VEB = 3.0 Vdc) ON CHARACTERISTICS (Note 4) DC Current Gain (IC = 0.1 mAdc, VCE = 1.0 Vdc) (IC = 1.0 mAdc, VCE = 1.0 Vdc) (IC = 10 mAdc, VCE = 1.0 Vdc) (IC = 50 mAdc, VCE = 1.0 Vdc) (IC = 100 mAdc, VCE = 1.0 Vdc) HFE Collector -Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) VCE(sat) Base -Emitter Saturation Voltage (IC = 10 mAdc, IB = 1.0 mAdc) (IC = 50 mAdc, IB = 5.0 mAdc) VBE(sat) - Vdc Vdc SMALL-SIGNAL CHARACTERISTICS Current -Gain - Bandwidth Product (IC = 10 mAdc, VCE = 20 Vdc, f = 100 MHz) fT 300 - MHz Output Capacitance (VCB = 5.0 Vdc, IE = 0, f = 1.0 MHz) Cobo - 4.0 pF Input Capacitance (VEB = 0.5 Vdc, IC = 0, f = 1.0 MHz) Cibo - 8.0 pF Input Impedance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hie 1.0 10 kW Voltage Feedback Ratio (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hre 0.5 8.0 X 10- 4 Small -Signal Current Gain (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hfe 100 400 - Output Admittance (VCE = 10 Vdc, IC = 1.0 mAdc, f = 1.0 kHz) hoe 1.0 40 mmhos Noise Figure (VCE = 5.0 Vdc, IC = 100 mAdc, RS = 1.0 k ohms, f = 1.0 kHz) NF - 5.0 dB (VCC = 3.0 Vdc, VBE = - 0.5 Vdc, IC = 10 mAdc, IB1 = 1.0 mAdc) td - 35 tr - 35 (VCC = 3.0 Vdc, IC = 10 mAdc, IB1 = IB2 = 1.0 mAdc) ts - 200 tf - 50 SWITCHING CHARACTERISTICS Delay Time Rise Time Storage Time Fall Time ns ns 4. Pulse Test: Pulse Width v 300 ms, Duty Cycle v 2.0%. DUTY CYCLE = 2% 300 ns +3 V +10.9 V 10 < t1 < 500 ms 275 DUTY CYCLE = 2% t1 +3 V +10.9 V 275 10 k 10 k 0 -0.5 V CS < 4 pF* < 1 ns 1N916 -9.1 V < 1 ns * Total shunt capacitance of test jig and connectors Figure 1. Delay and Rise Time Equivalent Test Circuit Figure 2. Storage and Fall Time Equivalent Test Circuit http://onsemi.com 2 CS < 4 pF* MMBT3904L, SMMBT3904L TYPICAL TRANSIENT CHARACTERISTICS TJ = 25C TJ = 125C 10 5000 7.0 2000 5.0 Q, CHARGE (pC) CAPACITANCE (pF) VCC = 40 V IC/IB = 10 3000 Cibo 3.0 Cobo 2.0 1000 700 500 QT 300 200 QA 1.0 0.1 0.2 0.3 0.5 0.7 1.0 2.0 3.0 5.0 7.0 10 100 70 50 20 30 40 1.0 2.0 3.0 REVERSE BIAS VOLTAGE (VOLTS) Figure 3. Capacitance 20 30 50 70 100 200 Figure 4. Charge Data 500 500 IC/IB = 10 100 70 tr @ VCC = 3.0 V 50 30 20 VCC = 40 V IC/IB = 10 300 200 t r, RISE TIME (ns) 300 200 TIME (ns) 5.0 7.0 10 IC, COLLECTOR CURRENT (mA) 40 V 100 70 50 30 20 15 V 10 7 5 10 2.0 V td @ VOB = 0 V 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) Figure 5. Turn -On Time Figure 6. Rise Time IC/IB = 10 200 500 ts = ts - 1/8 tf IB1 = IB2 VCC = 40 V IB1 = IB2 300 200 IC/IB = 20 t f , FALL TIME (ns) t s , STORAGE TIME (ns) IC/IB = 20 200 IC, COLLECTOR CURRENT (mA) 500 300 200 7 5 100 70 IC/IB = 20 50 IC/IB = 10 30 20 100 70 50 10 10 7 5 7 5 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 200 IC/IB = 10 30 20 1.0 2.0 3.0 5.0 7.0 10 20 30 50 70 100 IC, COLLECTOR CURRENT (mA) IC, COLLECTOR CURRENT (mA) Figure 7. Storage Time Figure 8. Fall Time http://onsemi.com 3 200 MMBT3904L, SMMBT3904L TYPICAL AUDIO SMALL-SIGNAL CHARACTERISTICS NOISE FIGURE VARIATIONS (VCE = 5.0 Vdc, TA = 25C, Bandwidth = 1.0 Hz) 14 12 SOURCE RESISTANCE = 200 W IC = 1.0 mA NF, NOISE FIGURE (dB) NF, NOISE FIGURE (dB) 10 f = 1.0 kHz SOURCE RESISTANCE = 200 W IC = 0.5 mA 8 6 SOURCE RESISTANCE = 1.0 k IC = 50 mA 4 SOURCE RESISTANCE = 500 W IC = 100 mA 2 0 0.1 0.2 0.4 1.0 2.0 IC = 1.0 mA 12 IC = 0.5 mA 10 IC = 50 mA 8 IC = 100 mA 6 4 2 4.0 10 20 40 0 100 0.1 0.2 0.4 1.0 2.0 4.0 10 20 f, FREQUENCY (kHz) RS, SOURCE RESISTANCE (k OHMS) Figure 9. Figure 10. 40 100 h PARAMETERS (VCE = 10 Vdc, f = 1.0 kHz, TA = 25C) 100 hoe, OUTPUT ADMITTANCE (m mhos) h fe , CURRENT GAIN 300 200 100 70 50 30 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 50 20 10 5 2 1 10 0.1 0.2 Figure 11. Current Gain h re , VOLTAGE FEEDBACK RATIO (X 10 -4 ) h ie , INPUT IMPEDANCE (k OHMS) 10 5.0 2.0 1.0 0.5 0.1 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 10 5.0 10 Figure 12. Output Admittance 20 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) 5.0 10 7.0 5.0 3.0 2.0 1.0 0.7 0.5 10 0.1 Figure 13. Input Impedance 0.2 0.3 0.5 1.0 2.0 3.0 IC, COLLECTOR CURRENT (mA) Figure 14. Voltage Feedback Ratio http://onsemi.com 4 MMBT3904L, SMMBT3904L TYPICAL STATIC CHARACTERISTICS 1000 h FE, DC CURRENT GAIN TJ = +150C VCE = 1.0 V +25C 100 -55C 10 1 0.1 1.0 100 10 1000 IC, COLLECTOR CURRENT (mA) VCE, COLLECTOR EMITTER VOLTAGE (VOLTS) Figure 15. DC Current Gain 1.0 TJ = 25C 0.8 IC = 1.0 mA 10 mA 30 mA 100 mA 0.6 0.4 0.2 0 0.01 0.02 0.03 0.05 0.07 0.1 0.2 0.3 0.5 0.7 1.0 IB, BASE CURRENT (mA) Figure 16. Collector Saturation Region http://onsemi.com 5 2.0 3.0 5.0 7.0 10 MMBT3904L, SMMBT3904L IC/IB = 10 IC/IB = 10 0.7 150C 0.6 25C 0.5 -55C 0.4 0.3 0.2 0.1 0 0.001 0.01 0.1 1.0 -55C 0.8 25C 0.6 150C 0.4 0.0001 0.001 0.01 0.1 1 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (A) Figure 17. Collector Emitter Saturation Voltage vs. Collector Current Figure 18. Base Emitter Saturation Voltage vs. Collector Current 1.4 1.0 1.2 VCE = 1 V +25C TO +125C 0.5 1.0 0.8 1.2 0.2 1 qVC FOR VCE(sat) COEFFICIENT (mV/ C) VBE(on), BASE-EMITTER VOLTAGE (V) 1.4 VBE(sat), BASE-EMITTER SATURATION VOLTAGE (V) VCE(sat), COLLECTOR-EMITTER SATURATION VOLTAGE (V) 0.8 -55C 25C 0.6 0 -55C TO +25C -0.5 -55C TO +25C -1.0 +25C TO +125C 0.4 150C 0.2 0.0001 0.001 0.01 0.1 -2.0 1 0 20 40 60 80 100 120 140 160 IC, COLLECTOR CURRENT (A) IC, COLLECTOR CURRENT (mA) Figure 19. Base Emitter Voltage vs. Collector Current Figure 20. Temperature Coefficients 1 1000 1 ms 10 ms 1s 100 ms VCE = 1 V TA = 25C 0.1 180 200 Thermal Limit IC (A) fT, CURRENT-GAIN-BANDWIDTH PRODUCT (MHz) qVB FOR VBE(sat) -1.5 100 0.01 10 0.1 1 10 100 1000 0.001 Single Pulse Test @ TA = 25C 0.01 0.1 1 10 IC, COLLECTOR CURRENT (mA) VCE (Vdc) Figure 21. Current Gain Bandwidth vs. Collector Current Figure 22. Safe Operating Area http://onsemi.com 6 100 MMBT3904L, SMMBT3904L PACKAGE DIMENSIONS SOT-23 (TO-236) CASE 318-08 ISSUE AP NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. D SEE VIEW C 3 HE E DIM A A1 b c D E e L L1 HE q c 1 2 e b 0.25 q A L A1 MIN 0.89 0.01 0.37 0.09 2.80 1.20 1.78 0.10 0.35 2.10 0 MILLIMETERS NOM MAX 1.00 1.11 0.06 0.10 0.44 0.50 0.13 0.18 2.90 3.04 1.30 1.40 1.90 2.04 0.20 0.30 0.54 0.69 2.40 2.64 --- 10 MIN 0.035 0.001 0.015 0.003 0.110 0.047 0.070 0.004 0.014 0.083 0 INCHES NOM 0.040 0.002 0.018 0.005 0.114 0.051 0.075 0.008 0.021 0.094 --- MAX 0.044 0.004 0.020 0.007 0.120 0.055 0.081 0.012 0.029 0.104 10 STYLE 6: PIN 1. BASE 2. EMITTER 3. COLLECTOR L1 VIEW C SOLDERING FOOTPRINT* 0.95 0.037 0.95 0.037 2.0 0.079 0.9 0.035 SCALE 10:1 0.8 0.031 mm inches *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81-3-5817-1050 http://onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative MMBT3904LT1/D