Printed Circuit Test Jacks
● Description: Double entry design; probe inserts at either end of jack.
Accepts probes no longer than .084", contacts down to .074". Closed bottom
construction keeps jack from fouling with solder or flux. Locking ears hold
jack firmly to broad until soldered. Premise dimensions allow automated
assembly to boards.
● Body is molded Nylon per MIL-P-20693
● Beryllium Copper Spring
● Mounts into .052" Holes
● Data:
Insertion force: 30 oz. max.
Withdraw force: 8 oz. min with .080" probe.
● Ratings:Operating Voltage 1500 Volts., 60 cps RMS, Sea level. 350
Volts, 60 cps RMS at 50,000 feet. 5 AMP AC max. current rating
● Contact resistance: 20 Millivolt drop maximum at specified current at 25°
C
● Color: add color number as suffix to part number:
-101 White -102 Red -103 Black -104 Green -105 Blue -107 Yellow
Handles
Shaft Accessories
High Voltage Insulators
Brass Spacers & Standoffs
Brass Swivel Standoffs
Brass Chassis Fasteners
Aluminum Spacers & Standoffs
PC Board Supports
Nylon Spacers & Standoffs
Phenolic Spacers & Standoffs
Ceramic Standoffs
● Home
● About Abbatron
● Products
● Locate
Distributor
or
Representative
● Contact Us
● Request
Information
● Site Map
Inventory Search
Cross Reference
UPS Tracking