ATV212H075M3X - SCHNEIDER ELECTRIC

Altivar™ 212 Drive

Selection Guide

Make the most of your energySM

Variable speed drives for asynchronous motors

used in centrifugal pump and fan applications

Altivar 212 Drive Selection

• The Altivar 212 drive is intended for use with three-phase asynchronous motors for variable torque pump and fan applications.

• Select the Altivar 212 drive using the nameplate voltage and full load ampere rating of the motor nameplate and the table below.

• The Altivar 212 drive includes 3 logic inputs, 2 analog inputs, 1 analog output and 2 relay outputs (with 1 NO and 1 NO/NC contacts).

• It includes integrated 4 digit, 7 segment LED dispay with 7 button keypad, as well as RJ45 Modbus™ port, plus a 4 screw removable terminal

block for software selectable BACnet, Modbus, METASYS N2 or APOGEE P1 communication protocols. LonWorks is available in an option card.

• These horsepower, kW and continuous ampere ratings apply to default switching

frequency and maximum 40° C ambient.

• Refer to the installation manual for derating curves as a function of switching

frequency, ambient temperature and mounting conditions.

• IP20 Altivar 212 drives can be installed as UL Type 1 with the optional conduit box

when following instruction in the Installation Manual.

• To select an Altivar 212W... drives with Class B EMC lter, add the letter “C” to the

end of the standard catalog number.

• C Late 3Q 2011 availability.

AC Input

line voltage

Enclosure rating

Three-phase

motor power

Continuous

Output

current

IP 20

Open style product

Type 1 conduit kit

(purchase ATV212 and

conduit Kit for Type 1

installation)

Type 12/IP54

HP kW A Catalog number QTY Frame

size

Catalog number QTY Catalog number CQTY Frame

size

208/240

Vac

three-

phase

1 0.75 4.6 ATV212H075M3X 1 VW3A31814 —

2 1.5 7.5 ATV212HU15M3X 1 VW3A31814 —

3 2.2 10.6 ATV212HU22M3X 1 VW3A31814 —

4 3 13.7 ATV212HU30M3X 2 VW3A31815 —

5 4 18.7 ATV212HU40M3X 2 VW3A31815 —

7.5 5.5 24.2 ATV212HU55M3X 3 VW3A31816 —

10 7.5 32 ATV212HU75M3X 3 VW3A31816 —

15 11 46.2 ATV212HD11M3X 4 VW3A31817 —

20 15 61 ATV212HD15M3X 4 VW3A31817 —

25 18.5 74.8 ATV212HD18M3X 4 VW3A31817 —

30 22 88 ATV212HD22M3X 5 VW3A9206 —

40 30 117 ATV212HD30M3X 7 VW3A9208 —

380/480

Vac

three-

phase

1 0.75 2.2 ATV212H075N4 1 VW3A31814 ATV212W075N4 1

2 1.5 3.7 ATV212HU15N4 1 VW3A31814 ATV212WU15N4 1

3 2.2 5.1 ATV212HU22N4 1 VW3A31814 ATV212WU22N4 1

4 3 7.2 ATV212HU30N4 2 VW3A31815 ATV212WU30N4 2

5 4 9.1 ATV212HU40N4 2 VW3A31815 ATV212WU40N4 2

7.5 5.5 12 ATV212HU55N4 2 VW3A31815 ATV212WU55N4 2

10 7.5 16 ATV212HU75N4 3 VW3A31816 ATV212WU75N4 2

15 11 22.5 ATV212HD11N4 3 VW3A31816 ATV212WD11N4 3

20 15 30.5 ATV212HD15N4 4 VW3A31817 ATV212WD15N4 3

25 18.5 37 ATV212HD18N4 4 VW3A31817 ATV212WD18N4 4

30 22 43.5 ATV212HD22N4S C4 VW3A31817 —

30 22 43.5 ATV212HD22N4 5 VW3A9206 ATV212WD22N4 5

40 30 58.5 ATV212HD30N4 5 VW3A9206 ATV212WD30N4 5

50 37 79 ATV212HD37N4 6 VW3A9207 ATV212WD37N4 6

60 45 94 ATV212HD45N4 6 VW3A9207 ATV212WD45N4 6

75 55 116 ATV212HD55N4 7 VW3A9208 ATV212WD55N4 7

100 75 160 ATV212HD75N4 7 VW3A9208 ATV212WD75N4 7

ATV212HU15N4 ATV212W075N4 ATV212HU55M3X

ATV212HD37N4 ATV212HD37N4ATV212HU30M3X

Altivar 212 Accessories and Options

User interface options For use with Catalog number QTY

Remote LCD display keypad Altivar 212, 312, 32 ,

61, 71

VW3A1101

8 line, 24 characters per line, plain text, 8 keys, rotary wheel, 60°C IP54 rated — —

Remote LCD keypad mounting accessories — —

IP54 rated kit for remote mounting LCD keypad on enclosure door VW3A1101 VW3A1102

Clear plastic door for use with VW3A1102 for IP65 rating and tamper resistance VW3A1102 VW3A1103

Female/Female right angle RJ45 adaptor, to connect cable and keypad.*

(*not required if using VW3A1102)

VW3A1101 VW3A1105

Remote LCD keypad mounting cables – equipped with two RJ45 connectors — —

1 meter length VW3A1101 VW3A1104R10

3 meter length VW3A1101 VW3A1104R30

5 meter length VW3A1101 VW3A1104R50

10 meter length VW3A1101 VW3A1104R100

Multi-loader Altivar 12, 212, 312, 32

Altistart 22

VW3A8121

Use to copy congurations between like drives, PC Soft or SoMove PC software — —

Software For use with Catalog number

PCSoft Altivar 21 and 212 Download at www.

schneider-electric.us/go/

drives

PC software use for: conguring, monitoring and trouble shooting Alitvar 212 drives

Requires one of two cables (noted below) to connect a PC to the RJ45 Modbus port

on the drive

— —

USB/RS485 cable: equipped with USB connector and RJ45 connector Altivar and Altistart TCSMCNAM3M002P

RS 232-RS485 converter with SUB-D and RJ45 port, cable with two

RJ45 connectors

Altivar 212 VW3A8106

SoMove™ Mobile Altivar 212 Download at www.

schneider-electric.us/go/

drives

Software for compatible mobile phones provides wireless interface similar to the

LCD display

Requires Modbus to Bluetooth adaptor to connect phone and Altivar 212 drive

— —

Modbus – Bluetooth adaptor: connects to RJ45 Modbus port on the drive Altivar 12, 212, 312,61, 71 VW3A8114

Communication option For use with Catalog number

LonWorks communication option card Altivar 212 VW3A21212

Provides 4 screw terminal block for connection to LonWorks network

Install in place of standard control board that comes mounted in the Altivar 212 drive

The I/O count is reduce to 3LI, 1 AI and 1 NO/NC relay

— —

Mounting kit For use with Catalog number

DIN rail mounting kit Altivar 212H075M3X…

22M3X and Altivar

212H075N4…22N4

VW3A31852

For installation on to 35mm wide DIN rail — —

VW3A1101

VW31101, VW31102,

VW31103, VW3A1104R10

VW3A8121 PCSoft™ Software

SoMove™

Mobile Software VW3A21212

Altivar 212 Drive Technical Characteristics

Environmental Specifications

Temperature ratings 0 to + 40°C operational without de-rating, up to 60°C with de-rating (see installation manual

for deratings)

Altitude ratings Up to 3,300 ft (1,000 meters) without de-rating, de-rate nominal current by 1% for each additional 330 ft

( 100m) up to 10,000 ft ( 3,000 m)

Limit to 6,600 ft (2,000 m) if supplied by corner grounded distribution system

Humidity Up to 95% non-condensing , IEC 60068-2-3

Vibration resistance 1.5 mm peak to peak from 3 to 13 Hz conforming to EN/IEC 600068-2-6, 1 gn from 13 to 200 Hz

conforming to IEC/EN 60068-2-8

Shock resistance 15 gn for 11 ms conforming to IEC/EN 60068-2-27

Pollution degree 1 HP to 25 HP @ 200/240 V, 1 HP to 5 HP @ 380/480 V: Pollution degree 2 per IEC/EN 61800-5-1, 30

HP to 40 HP @ 200/240 V, 30 HP to 100 HP @ 380/480 V: Pollution degree 3 per IEC/EN 61800-5-1

Degree of protection: ATV212 H range

ATV212 W range

IP20, Conformal coating per IEC 60721-3-3 classes 3C2 and 3S2, Type 1 with optional conduit kit

IP54/Type 12, Conformal coating per IEC 60721-3-3 classes 3C2 and 3S2

Electrical Specifications

Input voltage and HP range ATV212 W

is available in 380/480 range only

200 – 15% to 240 +10%, Three phase input, Three phase output, 1 HP to 40 HP

380 – 15% to 480 +10%, Three phase input, Three phase output, 1 HP to 100 HP

Input frequency 50 Hz -5% to 60 Hz +5%

Galvanic isolation Galvanic isolation between power and control (inputs, outputs and power supplies)

Drive input power section Six pulse bridge rectier

Drive output power section IGBT inverter with pulse width modulated output

Power factor Above 99%

Efciency Above 98% at full load

Switching frequency Selectable from 6 to 16 kHz, 12 kHz nominal rating for 1 HP to 20 HP @ 200/240 V, 380/480 V

Selectable: 6 to 16 kHz, 8kHz nominal rating for 30 HP to 40 HP @ 200/240 V, 30 HP to

100 HP @ 380/480 V

Acceleration and deceleration ramps 0.1 to 3200 seconds in 0.1 seconds increments

Frequency output range 0.5 to 200 hertz

Skip frequencies Three adjustable skip frequency bands

Speed range 1 to 10

Integrated motor protection Class 10 electronic overload protection

Asynchronous motor control proles Sensorless ux vector, 2 point volts/hertz, quadratic volts/hertz, energy savings mode: a optimization

motor algorithm that automatically optimizes voltage based on load

Transient over current 110% nominal for 60 seconds, 180% for 2 seconds

Embedded functions Over 50 functions dedicated to pump and fan applications

User interface On board: 5 LED indicators for various functions, 4 digit, 7 segment LED display with 7 button keypad

for: Run, Stop/Reset, Local/remote, Speed up, speed down, Mode selection and Enter. Quick start

menu, fault history, I/O mapping, last-used menus, status monitoring and self diagnostics. Fault

messages and status such as: power on time, elapsed time, motor run time, line voltage, motor

current, ready to run, running, motor speed, etc.

Embedded communication Embedded RJ45 port for remote keypad connection, Multi-loader, PC software, or Bluetooth dongle

for So Mobile smart phone connection. Embedded 4 screw removable terminal for daisy chain

connection for: Modbus, BACnet, Metesys N2, or Apogee P1 communication networks.

Harmonic abatement Embedded reduced harmonic technology provides <35% THDI at VFD input terminals,

which is equivalent to a 3% line reactor or DC choke. See technical paper 8800DB0702

for more information.

EMC compliance: ATV212 H and W N4 range:

ATV212 W N4C range:

ATV212H M3X range:

Integrated Class 2 EMC lter for radiated and conducted emissions, IEC 61800-3, category C2 and C3

Integrated Class 2 EMC lter for radiated and conducted emissions, IEC 61800-3, category C1

No integrated EMC lter (use optional lters to reduce emission levels)

Compliance UL 508C, RoHS, IEC 61800-5-1, IEC/EN61000-3-12 THDI harmonic standard

Certications UL File E116875, CSA 2278406, UL 508C, Plenum rated per UL508C for UL1995 installations,

C-Tick, NOM 117, CE marked

Altivar 212 Inputs/Outputs Electrical Characteristics

Default

function setting

Function Terminals Characteristics

— External power supply input PLC +24 Vdc input for external power supply for logic inputs Max. permissible voltage: 50 Vdc

Internal supply P24 Short-circuit and overload protection: 24 Vdc supply (min. 21 Vdc, max. 27 Vdc),

maximum current: 200 mA

Common CC 0 Vdc common (2 terminals)

Fault relay

Congurable relay outputs

FLA

FLB

FLC

1 relay logic output, 1 N/C contact, and 1 N/O contact with common point

Minimum switching capacity: 10 mA for 5 Vdc

Maximum switching capacity:

• On resistive load (cos  = 1): 5 A for 250 Vac or 30 Vdc

• On inductive load (cos  = 0.4 and L/R = 7 ms): 2 A for 250 Vac or 30 Vdc

Max. response time: 10 ms

Speed attained RY

1 relay logic output, 1 N/O contact

Minimum switching capacity: 3 mA for 24 Vdc

Maximum switching capacity:

• On resistive load (cos  = 1): 3 A for 250 Vac or 30 Vdc

• On inductive load (cos  = 0.4 and L/R = 7 ms): 2 A for 250 Vac or 30 Vdc

Max. response time: 7 ms ± 0.5 ms

F: Run forward

R: Preset speed

at 15 Hz

RES: Reset

Congurable logic inputs

RES

3 programmable logic inputs, 24 Vdc, compatible with level 1 PLC, IEC 65A-68 standard

Impedance: 4.7 kΩ

Maximum voltage: 30 Vdc

Max. sampling time: 2 ms ±0.5 ms

Multiple assignment makes it possible to congure several functions on one input

Positive logic (Source): State 0 if  5 Vdc or logic input not wired, state 1 if  11 Vdc

Negative logic (Sink): State 0 if  16 Vdc or logic input not wired, state 1 if  10 Vdc

Output

frequency

Congurable analog output FM 1 switch-congurable (SW101) voltage or current analog output:

• Voltage analog output 0–10 Vdc, minimum load impedance 7.62 kΩ

• Current analog output X–Y mA by programming X and Y from 0 to 20 mA, maximum

load impedance: 970 Ω

Max. sampling time: 2 ms ±0.5 ms

Resolution: 10 bits

Accuracy: ±1 % for a temperature variation of 60° C

Linearity: ±0.2%

— Internal supply available PP Short-circuit and overload protection: One 10.5 Vdc ± 5% supply for the reference

potentiometer (1 to 10 kΩ), maximum current: 10 mA

Primary speed

reference,

0–10 V

Congurable analog/

logic input

VIA Switch-congurable voltage or current analog input:

• Voltage analog input 0–10 Vdc, impedance 30 kΩ maximum voltage: 24 Vdc

• Analog current input X–Y mA by programming X and Y from 0 to 20 mA, with

impedance 250 Ω

Max. sampling time: 3.5 ms ±0.5 ms

Resolution: 10 bits

Accuracy: ±0.6% for a temperature variation of 60° C

Linearity: ±0.15% of the maximum value

This analog input is also congurable as a logic input

Consult the Altivar 212 Programming Manual for more information

Secondary

speed

reference,

1–10 V

Congurable analog input VIB Voltage analog input, congurable as an analog input or as a PTC probe input

Voltage analog input:

• 0–10 Vdc, impedance 30 kΩ max. voltage 24 Vdc

• Max. sampling time: 22 ms ±0.5 ms

• Resolution: 10 bits

• Accuracy: ±0.6% for a temperature variation of 60 °C

• Linearity: ±0.15% of the maximum value PTC probe input:

• 6 probes max. mounted in series

• Nominal value < 1.5 kΩ

• Trip resistance 3 kΩ, reset value 1.8 kΩ

• Short-circuit detection threshold < 50 Ω

— Graphic display terminal

or Modbus

RJ45 Used to connect graphic display terminal or connect the drive to a Modbus eldbus

Note: for using Modbus on the RJ45, modify parameter F807 (see Modbus manual)

— Fieldbus Open style

connector

Refer to communication manual related to the eldbus

Altivar 212 Drive

Integrated Fan and Pump Functionality

Run command Input to drive by remote contact from the BAS, 24 vdc supplied by VFD

Speed command Input to drive from the BAS; typically 4-20mAdc or 0-10 Vdc

Run status Output contact from drive to the BAS; 1 N.O. contact on drive

Speed feedback Analog output from drive to the BAS; typically 4-20mAdc, or assignable to meter values

Fault Output Output contact from drive to the BAS; 1 N.O. & 1 N.C. contact on drive

Loss of Speed Conguration to run at last speed or a pre-dened speed on loss of speed command

Automatic Restart Selectable conguration to automatically restart after cause of fault is cleared

Skip Frequency Bands Three skip frequency settings with adjustable bandwidth to tune out resonating frequencies

in piping or ductwork

Local/Remote Control Keypad selectable: local keypad control for Run, Stop and speed control or from remote signal

from BAS

Catch on the Fly Conguration to initiate speed and direction search to provide smooth start of windmilling fans

Damper Control Relay Output on the drive to control damper opening sequence, and wait for feedback to start the motor

Smoke Purge Override Logic Input on the drive congured to run the motor at congured speed for forced ventilation

Broken Belt Detection Conguration to detect under load condition and initiate alarm sequence

PID Control Set point and feedback inputs for proportional, integral, and derivative control

Sleep/Wake-up Conguration in the drive to stop the pump at low or no ow and re-start on demand for ow

Pump Jam Management Conguration to manage blocked pump impeller

Motor direction protection Conguration to prevent operation in reverse direction

Typical air handling applications:

• HVAC supply and return fans

• Exhaust and ventilation fans

• Cooling tower fans

• Energy recovery wheels

Typical pumping applications:

• Cooling tower pumps

• Chilled water and hot water pumps

• Fountain pumps

• Domestic water supply pumps

Scan this code

to download

the Altivar 212

Installation

Manual

Scan this code

to download

the Altivar 212

Programming

Manual

Altivar 212 Drive Dimension and Weights

Electronic 2D sales drawings with specifications and 3D CAD models available

at www.schneider-electric.us/go/CAD

IP20 drives UL Type 1

Frame

size

a – Width b – Height c – Depth Approximate

weight

d – Height with

Type 1 conduit kit

Weight with

Type 1 conduit kit

mm in. mm in. mm in. kg. lbs. mm in. kg. lbs.

1 105 4.13 143 5.63 150 5.91 1.2 2.65 194.5 7.66 2.1 4.65

2 140 5.51 184 7.24 150 5.91 2.4 5.29 236 9.29 3.53 7.79

3 180 7.09 232 9.13 170 6.69 4.7 10.36 311 12.24 6.05 13.36

4 245 9.65 329.5 12.97 190 7.48 7 15.44 401 15.79 7.23 15.94

5 240 9.45 420 16.54 213 8.39 9 19.85 480 18.89 10.59 23.35

6 240 9.45 550 21.65 244 9.61 38.1 84.01 610 24.01 39.92 88.01

7 320 12.60 630 24.80 289.9 11.41 55.4 122.16 833 32.80 57.68 127.16

Frame 1 and 2

Frame 5 and 6

Frame 3 and 4

Frame 7

This document has been

printed on recycled paper

May 2011 sf

Schneider Electric USA, Inc.

Automation and Control Center of Excellence

8001 Knightdale Blvd.

Knightdale, NC 27545

Tel: 919-266-3671

www.schneider-electric.us

Document Number 8800HO1101

Schneider Electric Canada, Inc.

19 Waterman Avenue

Toronto, ON M4B 1Y2

Tel: 1-800-565-6699

www.schneider-electric.ca

Altivar 212W Drive Dimension and Weights

IP54 drives

Frame

size

a – Width b – Height c – Depth Appr.

weight

mm In. mm In. mm In. kg. lbs.

1 215 8.46 297 11.69 192 7.56 7 15.44

2 230 9.06 340 13.39 208 8.19 9.65 21.28

3 290 11.42 560 22.05 315 12.40 30.3 66.81

4 310 12.20 665 26.18 315 12.40 37.4 82.47

5 284 11.18 720 28.35 315 12.40 49.5 109.15

6 284 11.18 880 34.65 343 13.59 57.4 126.57

7 362 14.25 1000 39.51 364 14.33 61.9 136.49

Frame 1 and 2 Frame 3 to 7

Scan this code

to review 3D

CAD drawings

for Altivar 212