CAN-bus Surge Protection Solution Products TBU-CA065-100-WH Objective Compliance CAN is a serial bus with a message-based protocol designed specifically for automotive applications but can also be used in other areas such as industrial automation and medical equipment. Bit rates up to 1 Mbit/s are possible at network lengths below 40 m. This solution provides protection from high energy surges originating from switching and/or higher voltage transients. IEC 61000-4-4 EFT IEC 61000-4-5 Surge / Lightning Alternate Recommendations * 2x CDSOT23-S2004 Benefit This solution is designed to protect the interface from surge events. Solution MOV-10D201K 2 TBU(R) High-Speed Protectors: TBU-CA065-100-WH 2 MOVs: MOV-10D201K 2 TVS Diode Arrays: CDSOT23-T12LC TBU-CA065-100-WH CAN-bus MOV-10D201K CDSOT23-T12LC CDSOT23-T12LC TBU-CA065-100-WH MOV-10D201K Design Kit CDSOT23-T12LC The schematic above illustrates the application protection and does not constitute the complete circuit design. Customers should verify actual device performance in their specific applications. PN-DESIGNKIT-26 Americas: Europe: Tel +41-(0)41 768 55 55 Fax +41-(0)41 768 55 10 Asia-Pacific: Tel +1-951 781-5500 Fax +1-951 781-5700 Bourns(R) PortNote(R) solutions provide protection recommendations for typical port threats. Tel +886-2 256 241 17 Fax +886-2 256 241 16 For more information, go to: COPYRIGHT(c) 2012 * BOURNS, INC. * 6/12 * e/CPK1142 * "PortNote" is a registered service mark of Bourns, Inc. "Bourns" and "TBU" are registered trademarks of Bourns, Inc. in the U.S. and other countries. www.bourns.com or email: protection@bourns.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Bourns: PN-DESIGNKIT-26