8 7 6 i, 3 DRW NO. SH REV | v C -335-4 105-500 1.) 8B ZONE [REV SCR NUMBER DESCRIPTION BY DATE APPROVED LEFT POLARIZING BACKPLANE MODULE {~ ALL | - |DSMH-726HWR.VERO1 NEW RELEASE HCL-SD. |04/12/2007 | D.SMITH ASSEMBLY PART NUMBER ASSIGNMENT A |MCHU-76HMLS.VERO2 KEEP OUT ZONES ADDED HCL-AP. |10709/2007 | D.SMITH 335 - X 1xXX - XXX ADDED NEW PART NUMBERS FOR NEW PLATING CODES - IN ASSEMBLY PART NUMBER ASSIGNMENT TREE. | +INIMUY B |CSAS-83KKVW .VERO1 MODIFIED NOTE & AND 7. HCL-MH_ | 03/12/2010 | C.SAMMIS LOAD REMOVED REVISION COLUMN IN TABLE 1. 4 = STANDARD LoAD @) PIN w IPE LENGTH. SEE DETAIL U CORRECTED NOTES SEQUENCE NUMBERS. 7 = CUSTOM LOAD, LEADED - 1.00 mm 8 = CUSTOM LOAD. LEAD FREE 4 = 2.00 mm WIPE ; L = CUSTOM LOAD, LEADED, ADVANCED PLATING 5 = 3.00 mm WIPE N = CUSTOM LOAD, LEAD FREE, ADVANCED PLATING PLATING cope @) 0-735 & = B04 NUMBER OF COLUMNS 1-732 5 = 803 05 = 5 COLUMN MODULE 2-769 6 = 806 10 = 10 COLUMN MODULE 3-768 7 = 805 25 = 25 COLUMN MODULE POLARIZING PIN LOCATION CODE (SEE TABLE 2) TABLE 1 ASSEMBLY 1) p TOTAL NUMBER OF INITIAL ENGAGEMENT PART NUMBER DIFFERENTIAL PAIRS so VIEW 335-X105-XXX | 4 (7.4) 75.53 5 = 335-X105-XXX | 9 (16.65) | 24.78 30 SCALE. 3/1 ISO VIEW BOTTOM OAUGHTERCARD PCB X105- SCALE 3/1 335-X105-XXX | 24 | (44.40) | 52.53 75 REFERENCE) \\ TABLE 2 KX 1.85 = i SEE TABLE 1 (DAUGHTERC ARD 330 INK OH -OXX | -AXX | -BXX | -CXX | -DXX | -EXx | -FXX | -Gxx | -HXX | | r* 1.85 WAFER RecEDENCE) ZL Lf AUGHTERC ARD i tf al | WAFER | P C POLARIZING PIN t c , ORIENTATION rn 2X 9.99 = (11.10) 7 DAUGHTERC ARC I r E ) -| L CO | SHIELD ROW o Lal] ] } , 0 SIGNAL ROW oo Ot P oo 08 | a , Row A _! SHIELD OW [o-oo 4 o L I o Oo 9O o o - SIGNAL ROW so ok by SHIELD ROWpeee | o 0o o ,o | 6 | ; SIGNAL ROW 228 {iH -XX3 = (3.55) TOP VIEW XXh = (455) BACKPLANE INSULATOR irc atr ae aaa \ -~XX5 = (5.55) TOP REFERENCE) 1.79 | pi... | FROM TOP OF DC PCB TO i FULLY MATED / ACKPLANE GROUND SHIELD | | - 0.00 OFFSET FROM DC \ L 1.6 SEE DETAIL U COLUMN TO BP COLUMN B T V4 | | DETAIL U _- / | VEIAIL VU P 10.4 16.2 SCALE 4/1 Go NOTCH SIDE SCALE 87" a (GROUND SHIELD HEIGHT) 5 | | 1 X IF 4TH DIGIT OF THE PART NUMBER IS 7 OR 8 OR L OR N (CUSTOM PART). DIGIT 5 THROUGH 10 DO V : : NOT FOLLOW THE PARADIGM IN TABLE. / ACKPLANE SIGNAL PIN , 2.04 | {4 4 K X | | NINIS NIN - 6. USE MATING GAUGE PART NUMBER XXX-XXXX-XXX AFTER INSERTION ONTO BOARD TO CHECK POSITION OF BLADES. T - Jt. Y [_ 2 5. FOR REPAIR PROCEDURE FOR SIGNAL BLADE, SEE TB-2099. | (7.28) fo 1.60) MIN ae LA C 9TH DIGIT OF PART NUMBER IDENTIFIES PLATING: iM -K X 1.85 = (L) 4 (2.25) ci 735 - Ni SULFAMATE, STANDARD GOLD, LEADED TAIL B 732 - Ni SULFAMATE, HIGH GOLD, LEADED LENGTH S 769 - Ni SULEAMATE, STANDARD GOLD, LEAD-FREE a 768 - Ni SULEAMATE, HIGH GOLD, LEAD-FREE Uh 804 - NANO Ni, STANDARD GOLD, LEADED S 803 - NANO Ni, HIGH GOLD, LEADED 806 - NANO Ni, STANDARD GOLD, LEAD-FREE DESIGN 07/17/2006 805 - NANG Ni, HIGH GOLD, LEAD-FREE av M.DEROSA Amphenol TCS 0.0 0.25 | prawn 07/18/2006 A Division of Amphenol Corporation . 2 @ PART MARKING AS FOLLOWS: 0.00 10.43 M.DEROSA 200 Innovative Way, Nashua, NH 08062 603.879.3000 LINE 1; ATCS AND DATECODE (ATCS YYWW). CHK 07/1872006 TITLE = LINE 2: MODULE PART NUMBER (335-####-###). 0.000 I+ - B.RICHARD | LEFT POLARIZED BACKPLANE MODULE |o= LINE 3: WORK ORDER NUMBER (###d######), WHERE * DENOTES MANUFACTURING LOCATION. mare te aPvO 0412/2007 3 PAIR GbXe D SMITH | part no. REV (@) NOTCH DESIGNATES ROW A SIDE OF SHROUD. NOTCH FEATURE ON OPPOSITE SIDE FROM PART MARKING. UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE PART NUMBER TREE NZA ARE IN MM, DECIMAL MARKER IS A PERIOD DRAW ING NO. REV 1. REFER TO TB-2085 FOR GbX PRODUCT SPECIFICATIONS. {} C -335-4105-500 B CUSTOMER USE Pro/E type: S1-P1031-CU-HS-BP-SHRD-LTPOL-05 | 1.2 NOTES: INTERPRET PER ASME Y14.5M DRAW ING Pro/E DRAWING: C-335-4105-500 | B.0 CODE IDENT 31473 SIZE 0D SCALE 1/1 SHEET 1 OF 2 8 7 6 5 3 2 18 7 6 5 l, 3 DRW NO. SH REV C-335-4105-500 2 B 19.210 19.21 @ ZONE JREV] SCR NUMBER DESCRIPTION BY DATE APPROVED SEE SHEET 1 15.55 0.51 - 15.55 ~ Do 77 (0.018) PTH S O oO > |D0.10 |X |Y e} 3.38 | bee G) 0.51 B0.57 [0.0225] DRILL iA Doty (0.018) PTH YH} G B0.88 [0.035] PAD ly H+ = @ | 00.40 [x | 3.38 S Se B0.57 [0.0225] DRILL = o il [we] fl lo] fe] | Jel IS in D BO.88 [0.035] PAD 0.85 2 a) |S} pA {Sy |S} ] |S} |S 2 2 o] fe) fale) fs) |fSis] fe } lel ble} is} | EIS = 0-89 4 wi =| fal falls} fel /fs}is} fs ) SI =e } at rt ay -OO 0 00 Of O ! O+COLUMN 25 oo i a 00 0 O00 0/00 | O+C OLUMN 5 | i on of00 0 00 0] 0 0 | o++xo.umn 2 oF po oe Pe oj} o ol g COLUMN & ct : Oo} oO O O oO O O Oo O O- COLUMN 23 ai 4X [1.85 | = (7.40) -O,00 0 00 0]0 0. O+*OLUMN 3 | 15.53 lo | bo 0 00 oloond | > COLUMN 2 01,00 0.00 0/0 0. @~-<OLUMN 22 O 0 . ! iB GC DE F GH iS HOLUMN 4 of0 0 00 ] 0 0 |] o+roLUMN 21 1 [7 1. a a L | OS 590 /) AT old0 0 00 o|]loo0);,e COLUMN 20 ax Ae 0o1/00 0 00 0/00: 0 COLUMN 19 A \* OMPONENT OUTLINE o'oo o 00 0} 0 0 ! O-+<OLUMN 18 FEP OUT 1.35) a _ 2.10) O!lfoo oOo oO 0} 0 O | O}+<COLUMN 17 c At po 46.65 0100 0 00 0]0 0:6 COLUMN 16 (5.55) bee 3 | 5 POSITION LEFT POLARIZING 0.271 OPO 9 9 OBO 9 FO DO + OT~COLUMN 15 GbxX BACKPLANE HOLE PATTERN | otbo 0 oo oloold- suv 14 COMPONENT SIDE SHOWN 5.55 91 X [1.85] = (bh -40) a SCALE 6/1 a ! olfloo 0 00 O}0 01; 0 COLUMN 13 YH | | = 52.53 ol/o00 0 00 0}00: 0 COLUMN 12 { 3.38 - oO Poi 0.0781 THO Sfels) |e Oo; 00 0 O+{OLUMN 11 @ [Bo0.10 |x Jy S A) JS) AVR] JSfFlSys} ye : oOo 9 FOO. S 0 B0.57 [0.0225] DRILL ~ TF) im} eye} iS} | Lis ~ GO.88 [0.035] PAD ObFoo oOo 00 01} 0 0 | O+<OLUMN 10 0.85 : . LI a olo0o0 0 00 oO0}00,90 COLUMN 9 rSCT | oO 10 0 0 0 0 0 | O 0 | O-COLUMN 10 0100 0 00 o0]00:-0 -OLUMN 8 0100 0 00 0/00,0 COLUMN 9 OkF0O O08 00 ]| O | O+<OLUMN 7 Oo:00 0.00 0] 0 0. O+\OLUMN 8 : B oloo 0 00 o0O0}0 01] 0 COLUMN 6 O oO oO O oO O O O O COLUMN 7 18.90 a ! - @ 0/00 0 00 0/00: 6 COLUMN 6 O Oo 9 Oo 0 0 O 0 COLUMN 5 9 xX |1.85| = (16.65) o!oOo 0 00 +0} 0 O ! O-COLUMN 5 O;,ODO 0 O88 OO} O DO . O~7CLOLUMN 4 24.78 @ O | O60 O09 990 9}; 90 0 | COLUMN 4 oto oo o oo Of O | O@+<OLUMN 3 0:00 0 00 0/00: oO} COLUMN 3 0006 0 loo oO KOLUMN 2 _ 0.905 |l o ld0 0 00 ofool) 6 ! COLUMN 2 | DE F|GH'HG : | AG: A Cc DE F GH HG O O oO Oo O : - COLUMN 1 _ 0 e|o00 6 600 0 00 | COLUMN 1 -- -- yt Uy | Al. _ _ r | 5 (4.625) A (1.625) / \ oO & >) 0) COMPONENT OUTLINE (|) | m @) NO SURFACE TRACES IN THE KEEP OUT ZONES i \, 3 (7) SEE DOCUMENT 190-0006-000 FOR KEEPOUT ZONES. / SK \ cet OUT EEP OUT = TOLERANCES GN 07/17/2006 M.DEROSA Amphenol TCS ADDITIONAL ROWS AG AND HG RECOMMENDED FOR ALL APPLICATIONS. NS 0.0 ]+0.25 |oaww ovna,a008 ampieno 2 (THESE ROWS SHOULD BE CONNECTED TO GROUND.) o + (2,10) No OMPONENT OUTLINE 500 1208 M.DEROSA 200 innovative Way, Nashua, NH 02062 603.879.2000 ~ (9) OPTIONAL HOLE LOCATION FOR GROUNDED PIN OR A 7 = (5.59) 0.000 |a. | B-RICHARO | "LEFT POLARIZED BACKPLANE MODULE |oo@ ADDITIONAL GUIDE PIN SUPPORT. SEE DRAWING C-564-0471-000 (1.35) "te me (5.55) (2.10) i. sPVD 04/12/2007 3 PAIR GbXe FOR DETAIL AND LOCATION. FOR DC BOARD WEIGHT > 8IBS., ANGLES |+ - 5 SMITH fpawr ag a REFER TO TB-2104 FOR PROPER GUIDE PIN SIZING. 10 POSITION LEFT POLARIZING UNLESS OTHERWISE SPECIFIED DIMENSIONS SEE PART NUMBER TREE N/A GbxX BACKPLANE HOLE PATTERN 25 POSITION LEFT POLARIZING Oe ARE IN NM, DECIMAL MARKER IS A PERIOD | oss sos co = STATED PAD SIZE MAY REQUIRE FILLETING. FOR DETAILED ROUTING GUIDELINES, SEE TB-2090. COMPONENT SIDE SHOWN GbX BACKPLANE HOLE PATTERN __ SCALE 6/1 CUSTOMER USE Pro/E type: S!-P1031-CU-HS-BP-SHRD-LTPOL-05 | 1.2 NOTES: COMPONENT SIDE SHOW N INTERPRET PER ASME Y14.5M DRAW ING Pro/E DRAW ING: C-335-4105-500 | B.0 SCALE 7/1 CODE IDENT 31413 SIZE 0D SCALE 1/1 SHEET 2 OF 2 6 7 6 5 A h 3 2 '