Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-128 –
0D+1.0 max.
1.5±0.2
2.0 max. Terminal
(t=0.8)
4.0±0.5
4.0±0.5
(3.5)
Top of spin
Standard terminal type does not require
terminal trimming process
L+2.0 max.
(10.0)
10.0±0.1
2-02.0±0.1
Sleeve
Vent
Polarity bar
Recommended PWB piercing planRated voltage etc. indicate to sleeve.
0.8+0.2
–0.1
(0D)
■Features
●Endurance : 105 °C 3000 h
●Miniaturize (Maximum Ripple Current) Low profi le
●RoHS directive compliant
Snap-in Type
Series: EE Type: TS
■Speci cations
■Di men sions in mm (not to scale)
✽A formula to calculate estimated lifetime of TS-EE Series is different from other series. Please contact us.
Category Temp. Range –40 °C to +105 °C –25 °C to +105 °C
Rated W.V. Range 200 V.DC, 250 V.DC 400 V.DC, 450 V.DC
Nominal Cap. Range 220 μF to 1800 μF 75 μF to 560 μF
Capacitance Tolerance ±20 % (120 Hz/+20 °C)
DC Leakage Cur rent 3√CV (μA) max. After 5 minutes application of rated working voltage at +20 °C
C : Capacitance (μF) V: W.V. (V.DC)
tan dPlease see the attached standard products list
Endurance
After 3000 hours application of DC voltage with specifi ed ripple current (< rated DC working
voltage) at +105 °C±2 °C, the capacitors shall meet the following limits.
Capacitance change < ±20 % of initial measured value
tan d< 200 % of initial specifi ed value
DC leakage current < initial specifi ed value
Shelf Life
After storage for 1000 hours at +105 °C±2 °C within no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specifi ed in Endurance. (With voltage treatment)
(Unit : mm)
■Frequency correction factor for ripple current
Rated Voltage Frequency (Hz)
50 60 100 120 500 1 k 10 k to
200V.DC, 250V.DC 0.75 0.80 0.95 1.00 1.20 1.25 1.30
400V.DC, 450V.DC 0.75 0.80 0.95 1.00 1.20 1.25 1.40
01 Sep. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-129 –
■Standard Products
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
max.
(V. DC) (μF) (mm) (mm) (A r.m.s.) (pcs)
200
300 22 25 EETEE2D301HJ 1.70 0.15 200
390 22 30 EETEE2D391HJ 2.17 0.15 200
470 22 35 EETEE2D471HJ 2.22 0.15 200
590 22 40 EETEE2D591HJ 2.30 0.15 200
25 30 EETEE2D591JJ 2.30 0.15 200
700 22 45 EETEE2D701HJ 2.65 0.15 200
25 35 EETEE2D701JJ 2.65 0.15 200
590 30 25 EETEE2D591KJ 3.08 0.15 100
800
22 50 EETEE2D801HJ 3.08 0.15 200
25 40 EETEE2D801JJ 3.08 0.15 200
30 30 EETEE2D801KJ 3.48 0.15 100
35 25 EETEE2D801LJ 3.48 0.15 100
1000
25 50 EETEE2D102JJ 3.48 0.15 200
30 35 EETEE2D102KJ 3.98 0.15 100
35 30 EETEE2D102LJ 4.20 0.15 100
1200 30 40 EETEE2D122KJ 4.20 0.15 100
1300 30 45 EETEE2D132KJ 4.62 0.15 100
1500 35 40 EETEE2D152LJ 4.62 0.15 100
30 50 EETEE2D152KJ 5.22 0.15 100
1800 35 45 EETEE2D182LJ 5.22 0.15 100
250
220 22 25 EETEE2E221HJ 1.43 0.15 200
300 22 30 EETEE2E301HJ 1.56 0.15 200
25 25 EETEE2E301JJ 1.70 0.15 200
370 22 35 EETEE2E371HJ 1.70 0.15 200
420
22 40 EETEE2E421HJ 1.82 0.15 200
25 30 EETEE2E421JJ 1.82 0.15 200
30 25 EETEE2E421KJ 2.20 0.15 100
520 22 45 EETEE2E521HJ 2.00 0.15 200
25 35 EETEE2E521JJ 2.00 0.15 200
590
22 50 EETEE2E591HJ 2.30 0.15 200
25 40 EETEE2E591JJ 2.30 0.15 200
30 30 EETEE2E591KJ 2.50 0.15 100
35 25 EETEE2E591LJ 2.50 0.15 100
730
25 45 EETEE2E731JJ 2.70 0.15 200
30 35 EETEE2E731KJ 3.00 0.15 100
35 30 EETEE2E731LJ 3.00 0.15 100
860 30 40 EETEE2E861KJ 3.30 0.15 100
1000 30 45 EETEE2E102KJ 3.45 0.15 100
1300 35 45 EETEE2E132LJ 3.75 0.15 100
1500 35 50 EETEE2E152LJ 4.05 0.15 100
✽When capacitors of 035×45L and 035×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
Endurance : 105 °C 3000 h
01 Sep. 2013
Design and specifi cations are each subject to change without notice. Ask factory for the current technical specifi cations before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Aluminum Electrolytic Capacitors/ EE
– EEE-130 –
■Standard Prod ucts
W.V. Cap.
(120 Hz)
(±20 %)
Case size Part No. Specifi cation Min. Packaging Q'ty
Dia. Length
PET sleeve
Terminal Length
4.0 mm
(Without Top Plate)
Ripple
Current
(120 Hz)
(+105 °C)
tan d
(120 Hz)
(+20 °C)
max.
(V. DC) (μF) (mm) (mm) (A r.m.s.) (pcs)
400
100 22 25 EETEE2G101HJ 0.95 0.15 200
120 22 30 EETEE2G121HJ 1.22 0.15 200
150 22 35 EETEE2G151HJ 1.33 0.15 200
180 25 30 EETEE2G181JJ 1.33 0.15 200
30 25 EETEE2G181KJ 1.68 0.15 100
220
22 45 EETEE2G221HJ 1.55 0.15 200
25 35 EETEE2G221JJ 1.55 0.15 200
30 30 EETEE2G221KJ 1.79 0.15 100
35 25 EETEE2G221LJ 1.79 0.15 100
270
22 50 EETEE2G271HJ 1.68 0.15 200
25 40 EETEE2G271JJ 1.68 0.15 200
30 35 EETEE2G271KJ 2.12 0.15 100
320 25 45 EETEE2G321JJ 1.90 0.15 200
330 30 40 EETEE2G331KJ 2.33 0.15 100
35 30 EETEE2G331LJ 2.33 0.15 100
370 25 50 EETEE2G371JJ 2.12 0.15 200
390 30 45 EETEE2G391KJ 2.52 0.15 100
35 35 EETEE2G391LJ 2.52 0.15 100
470 30 50 EETEE2G471KJ 2.85 0.15 100
35 40 EETEE2G471LJ 2.85 0.15 100
560 35 45 EETEE2G561LJ 3.18 0.15 100
450
75 22 25 EETEE2W750HJ 0.83 0.20 200
100 22 30 EETEE2W101HJ 0.95 0.20 200
25 25 EETEE2W101JJ 0.95 0.20 200
120
22 35 EETEE2W121HJ 1.15 0.20 200
25 30 EETEE2W121JJ 1.22 0.20 200
30 25 EETEE2W121KJ 1.22 0.20 100
150 22 40 EETEE2W151HJ 1.22 0.20 200
180
22 45 EETEE2W181HJ 1.38 0.20 200
25 40 EETEE2W181JJ 1.38 0.20 200
30 30 EETEE2W181KJ 1.60 0.20 100
35 25 EETEE2W181LJ 1.60 0.20 100
220 25 45 EETEE2W221JJ 1.55 0.20 200
250 35 30 EETEE2W251LJ 1.90 0.20 100
270 25 50 EETEE2W271JJ 1.74 0.20 200
30 40 EETEE2W271KJ 1.90 0.20 100
300 35 35 EETEE2W301LJ 2.20 0.20 100
330 30 45 EETEE2W331KJ 2.20 0.20 100
35 40 EETEE2W331LJ 2.40 0.20 100
390 30 50 EETEE2W391KJ 2.40 0.20 100
35 45 EETEE2W391LJ 2.61 0.20 100
470 35 50 EETEE2W471LJ 2.85 0.20 100
✽When capacitors of 035×45L and 035×50L are mounted on PWB, reinforce them with mounting clamp or adhesives.
(Avoid using adhesives including halogenated compositions.)
✽
✽
✽
Endurance : 105 °C 3000 h
01 Sep. 2013
