DS04-21711-1E
FUJITSU SEMICONDUCTOR
DATA SHEET
ASSP for DTS
Piezoelectric VCO
(6 to 30 MHz)
M3 Series (E100)
DESCRIPTION
The M3 series (E100) of VCO (Voltage Controlled Oscillator) apply to the frequency range 70-300 MHz.
The M3 series uses a single lithium tantalate piezoelectric crystal (LiTaO3) that has large electromechanical
coupling coefficient, and a unique SAW resonator. That provides wide bandwidths, and exceptional stability in
VHF band until 300MHz.
FEATURES
Frequency range: 70 to 300MHz
Wide frequency controllable range: Over than ±1600 ppm (0.5 to 4.5 V)
Excellent temperature stability: ±200 ppm or less (-10 to 70 °C)
No adjustment is required due to high accuracy oscillation frequency (±300 ppm or less)
Highly reliable hermetically sealed package
High carrier noise ratio: -90dB or less (Detuning;12.5kHz, bandwidth; 8kHz)
Small type, and compatible with 8-pin DIP IC
PACKAGE
M3 Series (E100)
2
PIN ASSIGNMENT
PIN DESCRIPTIONS
Pin No. Symbol Descriptions
1V
IN Input (Control voltage)
4 GND Ground
5 Pout Output
8V
CC Supply voltage
(Bottom View)
14
58
M3 Series (E100)
3
ABSOLUTE MAXIMUM RATINGS
WARNING: Piezoelectric devices can be permanently damaged by application of stress (voltage, current,
temperature, etc.) in excess of absolute maximum ratings. Do not exceed these ratings.
RECOMMENDED OPERATING CONDITIONS
WARNING: The recommended operating conditions are required in order to ensure the normal operation of the
piezoelectric device. All of the device’s electrical characteristics are warranted when the device is
operated within these ranges.
Always use piezoelectric devices within their recommended operating condition ranges. Operation
outside these ranges may adversely affect reliability and could result in device failure.
No warranty is made with respect to uses, operating conditions, or combinations not represented on
the data sheet. Users considering application outside the listed conditions are advised to contact their
FUJITSU representatives beforehand.
STANDARD FREQUENCIES
Parameter Symbol Rating Unit
Min. Max.
Supply voltage VCC 0.5 +7.0 V
Input control voltage VIN 0.5 +7.0 V
Operating temperature Ta 10 +70 °C
Storage temperature Tstg 40 +100 °C
Oscillation frequency range 70 300 MHz
Parameter Symbol Value Unit
Min. Max.
Supply voltage VCC + 4.5 + 5.5 V
Input control voltage VIN 0.0 + 5.0 V
Operating temperature Ta 10 +70 °C
Control electrode Straight polarity
Nominal frequency Application Part number
70.0 MHz Wireless FAR-M3DC-70M000-E100
74.25 MHz HDTV FAR-M3DC-74M250-E100
97.2 MHz HDTV FAR-M3DC-97M200-E100
155.52 MHz B-ISDN FAR-M3DC-155M52-E100
M3 Series (E100)
4
ELECTRICAL CHARACTERISTICS
MEASURMENT CIRCUIT
Parameter Symbol Condition Value Unit Remarks
Min. Typ. Max.
Supply current ICC Without load +30 mA
Deviation of oscillation
frequency fOVIN = 2.5 V 300 +300 ppm Nominal frequency
reference
Oscillation frequency fLVIN = 0.5 V 1600 ppm VIN = 2.5 V reference
fHVIN = 4.5 V +1600 ppm
Frequency supply voltage
stability f (VCC) VCC = 5 V ± 5%−100 +100 ppm VIN = 2.5 V
VCC = 5 V reference
Output power POUT VIN = 2.5 V +2.0 dBm 50 terminated
Output power stability PVIN = 0.5 to 4.5 V 2+2dBVIN = 2.5 V reference
Frequency stability with
temperature f (Ta) Ta = 10 to 70 °C
VIN = 2.5 V 200 +200 ppm 25 °C reference
Output power stability
with temperature P (Ta) Ta = 10 to 70 °C
VIN = 2.5 V 2+2dB25 °C reference
VCC
ICC
VIN
D.U.T.
14
85 Spectrum
Analyzer
M3 Series (E100)
5
TYPICAL CHARACTERISTICS
Part number : FAR-M3DC-70M000-E100
1. Control Voltage vs. Oscillation Frequency Variation
2. Supply Voltage vs. Oscillation Frequency Variation
3. Temperature Characteristics
0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5
VCC = 5.0 V
5000
4000
3000
2000
1000
0
1000
2000
3000
4000
5000
Control voltage (V)
O
sc
ill
a
ti
on
f
requency var
i
a
ti
on
(ppm)
4.5 4.75 5 5.25 5.5
VIN = 2.5 V
500
400
300
200
100
0
100
200
300
400
500
Supply voltage (V)
O
sc
ill
a
ti
on
f
requency var
i
a
ti
on
(ppm)
20 10 0 10 20 30 40 50 60 70
VCC = 5.0 V, VIN = 2.5 V
500
400
300
200
100
0
100
200
300
400
500
Temperature ( °C)
O
sc
ill
a
ti
on
f
requency var
i
a
ti
on
(ppm)
M3 Series (E100)
6
PART NUMBER DESIGNATION
MARKING
(1) : Frequency : This specifies the nominal frequency using six alphanumeric characters.
M indicates the decimal point.
[Designation example]
FAR – M3DC
– – E100
(1) (2)
(2) : Taping : “–R” means 100 pcs/reel
F
74M250
E100 ∗∗∗∗
Logo
Series Name
No.1 pin indication
Frequency
Lot Number
M3 Series (E100)
7
PACKAGE DIMENSION
14
58
3 φ1.5
4 φ0.45
7.6 ± 0.1
7.6 ± 0.1
6.35 ± 0.35 4.7 ± 0.2
0.8 ± 0.2
13.08 Max.
13.08 Max.
F
74M250
E100 ∗∗∗∗
Dimensions in mm.
M3 Series (E100)
FUJITSU MEDIA DEVICES LIMITED
For further information please contact:
Japan
FUJITSU MEDIA DEVICES LIMITED
International Sales and Marketing Dept.
Sin-Yokohama Square Bldg.,14F,
Shin-Yokohama 2-3-12, Kouhoku-ku,
Yokohama-shi, Kanagawa 222-0033, Japan
Tel: +81-45-471-0061
Fax: +81-45-471-0076
http://www.fujitsu.co.jp/hypertext/fmd/English/index.html
North and South America
FUJITSU MICROELECTRONICS, INC.
3545 North First Street,
San Jose, CA 95134-1804, U.S.A.
Tel: +1-408-922-9000
Fax: +1-408-922-9179
Customer Response Center
Mon. - Fri.: 7 am - 5 pm (PST)
Tel: +1-800-866-8608
Fax: +1-408-922-9179
http://www.fujitsumicro.com/
Europe
FUJITSU MICROELECTR ONICS EUR OPE GmbH
Am Siebenstein 6-10,
D-63303 Dreieich-Buchschlag,
Germany
Tel: +49-6103-690-0
Fax: +49-6103-690-122
http://www.fujitsu-fme.com/
Asia Pacific
FUJITSU MICROELECTR ONICS ASIA PTE. LTD .
#05-08, 151 Lorong Chuan,
New Tech Park,
Singapore 556741
Tel: +65-281-0770
Fax: +65-281-0220
http://www.fmap.com.sg/
F0010
FUJITSU LIMITED Printed in Japan
All Rights Reserved.
The contents of this document are subject to change without notice.
Customers are advised to consult with FUJITSU sales
representatives before ordering.
The information and circuit diagrams in this document are
presented as examples of semiconductor device applications, and
are not intended to be incorporated in devices for actual use. Also,
FUJITSU is unable to assume responsibility for infringement of
any patent rights or other rights of third parties arising from the use
of this information or circuit diagrams.
The contents of this document may not be reproduced or copied
without the permission of FUJITSU LIMITED.
FUJITSU semiconductor devices are intended for use in standard
applications (computers, office automation and other office
equipments, industrial, communications, and measurement
equipments, personal or household devices, etc.).
CAUTION:
Customers considering the use of our products in special
applications where failure or abnormal operation may directly
affect human lives or cause physical injury or property damage, or
where extremely high levels of reliability are demanded (such as
aerospace systems, atomic energy controls, sea floor repeaters,
vehicle operating controls, medical devices for life support, etc.)
are requested to consult with FUJITSU sales representatives before
such use. The company will not be responsible for damages arising
from such use without prior approval.
Any semiconductor devices have inherently a certain rate of failure.
You must protect against injury, damage or loss from such failures
by incorporating safety design measures into your facility and
equipment such as redundancy, fire protection, and prevention of
over-current levels and other abnormal operating conditions.
If any products described in this document represent goods or
technologies subject to certain restrictions on export under the
Foreign Exchange and Foreign Trade Control Law of Japan, the
prior authorization by Japanese government should be required for
export of those products from Japan.