User Manual SEM3TM - Embedded Micro Metering ModuleTM Scan QR Code for more information usa.siemens.com/sem3 SEM3TM - Embedded Micro Metering ModuleTM SUMMARY These instructions do not purport to cover all details or variations in equipment, nor to provide for every possible contingency to be met in connection with installation, operation, or maintenance. Should further information be desired or should particular problems arise which are not covered sufficiently for the purchaser's purposes, the matter should be referred to the local the sales office. THE CONTENTS OF THIS USER MANUAL SHALL NOT BECOME PART OF OR MODIFY ANY PRIOR OR EXISTING AGREEMENT, COMMITMENT OR RELATIONSHIP. THE SALES CONTRACT CONTAINS ALL OBLIGATIONS OF SIEMENS INDUSTRY, INC. THE WARRANTY CONTAINED IN THE CONTRACT BETWEEN THE PARTIES IS THE SOLE WARRANTY OF SIEMENS INDUSTRY, INC. Notices DANGER The use of unauthorized parts in the repair of the equipment or tampering by unqualified personnel will result in dangerous conditions that can cause death, serious injury or property damage. IMPORTANT The information contained herein is general in nature and not intended for specific application purposes. It does not relieve the user of responsibility to use sound practices in application, installation, operation, and maintenance of the equipment purchased. Siemens reserves the right to make changes at any time without notice or obligations. Should a conflict arise between the general information contained in this publication and the contents of drawings or supplementary material or both, the latter shall take precedence. QUALIFIED PERSONNEL For the purposes of this manual and product labels, "qualified personnel" is one who has skills and knowledge related to the construction and operation of the electrical equipment and installations and has received safety training to recognize and avoid the hazards involved. In addition, s/he has the following qualifications: (a) is trained and authorized to energize, de-energize, clear, ground, and tag circuits and equipment in accordance with established safety practices. (b) is trained in the proper care and use of protective gear equipment such as rubber gloves, hard hat, safety glasses or face shields, flash clothing, etc., in accordance with established safety procedures (c) is trained in rendering first aid. This symbol indicates the presence of dangerous voltage within and outside the product enclosure that will cause death or serious injury if proper precautions are not followed. CAUTION This symbol alerts the user to the presence of hazards that may cause minor or moderate injury to persons, damage to property or damage to the device itself, if proper precautions are not followed. Installation Considerations Environmental ratings: Temperature to 14F to 149F (-10C to 65C). Measurement Category III (CAT III), Mains Supply Voltage Fluctuations up to 10% less than nominal low range the mains supply and 10% more than nominal high range of mains power supply. CAT III is for circuits which can be connected to the mains installation of a building. Energy is limited by circuit breakers to less than 110 000 VA with the current not exceeding 11 000 A. ii SEM3TM - Embedded Micro Metering ModuleTM User Manual Installation and maintenance of the SEM3 metering system should only be performed by qualified, competent personnel that have appropriate training and experience with high voltage and current devices. The meter must be installed in accordance with all local and national electrical codes. DANGER Failure to observe the following instructions will cause death or serious injury. * During normal operation of the SEM3 meter, hazardous voltages are present on its voltage leads, and throughout the connected potential transformer (PT), digital (status) input, control power and external I/O circuits. PT circuits are capable of generating lethal voltages and currents with their primary circuit energized. Follow standard safety precautions while performing any installation or service work (i.e. removing PT fuses). * The voltage leads to the meter should not be useraccessible after installation. * Do not use digital output devices for primary protection functions. These include applications where the devices perform energy limiting functions or provide protection of people from injury. Do not use the SEM3 in situations where failure of the devices can cause injury or death, or cause sufficient energy to be released that can start a fire. The meter can be used for energy management functions. * Do not HIPOT/Dielectric test the digital (status) inputs, digital outputs, or communications terminals. Refer to the label on the SEM3 meter for the maximum voltage level the device can withstand. * The SEM3 metering system offers a range of hardware options that affect input ratings. Use only parts and assemblies that are made specifically for use with the SEM3 system. Failure to do so could permanently damage the meter. This document provides installation instructions applicable to each hardware option. FCC Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Standards Compliance * Approvals and certifications - Accuracy - ANSI C12.1 - ANSI C12.20/0.5 - Safety/Construction - CSA C22.2 No. 1010-1 Safety Requirements for Electrical Equipment for Measurement - UL916 Energy Management Equipment - UL61010-1 (IEC 61010-1) Test and Measurement Equipment - Approvals/Certification - New York State PSC(Public Service Commission) approved Meter - ANSI C12.20 certification done through NRTL (Nationally Recognized Test Lab) - BTL Certified (BACnet Test Laboratories) - CTEP Certified (California Type Evaluation Program) by CDFA (California Department of Food and Agriculture), a division of Measurement Standards, CA - Electromagnetic Compatibility - IEC 61000-4-2 Electrostatic Discharge (B) - IEC 61000-4-3 Radiated Immunity (A) - IEC 61000-4-4 Electric Fast Transient (B) - IEC 61000-4-5 Surge Immunity (B) - IEC 61000-4-6 Conducted Immunity - FCC Part 15 subpart B, Class A Digital Device, Radiated Emissions - Environmental Conditions - Altitude up to 3000 meters - Maximum relative humidity 80% for temperatures up to 31C decreasing linearly to 50% relative humidity at 40C - Pollution Degree 3 Made by Siemens Industry, Inc. SEM3TM - Embedded Micro Metering ModuleTM User Manual iii SEM3TM - Embedded Micro Metering ModuleTM Table of Contents Introduction 4 Settings 15 - System Settings 15 SEM3TM - Embedded Micro Metering ModuleTM 4 - IP Configuration 16 - Controller 5 - DHCP 16 - Meter Modules 5 - Static IP 16 - Meter Racks 5 - Email Configuration 17 - Current Transformers 5 - Modbus RTU Slave Configuration 18 - Communication Cables 5 - Utility Seal 18 - System Time Setup 19 SEM3 is an Energy Management System 6 - Web Setting 20 - Meter Features 6 - System Information 20 - Measured Parameters 6 - Panel Configuration 21 - Energy 6 - Water / Gas Configuration 23 - Real Time Values 6 - SNMP Configuration 23 - Supported Protocols 6 - Installation Configuration Selection 23 - Communications Options 6 - RS-485 Connections 6 Global Settings 24 - Digital I/O Options 6 - Global Settings 24 - Firmware Upgrading Your Meter 6 - Pulse Inputs 24 - kWh Pulse Output 25 General Bus Wiring Considerations 8 - Alarm Summary 25 - Ethenet Connections 9 - Global Reset 25 - Global Alarm Setting 26 Ethernet Communication Setup 9 - Global Alarm Summary 27 - Modbus RTU Protocol 9 - Global Resets 27 - Modbus Slave Configuration 9 - Modbus/TCP Protocol 9 Multi-pole Configuration 28 - Modbus TCP Communications 9 - Configuration of Modules 29 Configuring Hardware 10 Branch Meter Configuration 31 - Current Transformers (CT) 10 - Change Basic Attributes of a Branch 31 - Meter Modules 10 - Set Specific Branch Warnings and Alarms 31 - Meter Racks 11 - Individual Meter Module Configuration 33 - Meter Module Internal Addresses 12 - Grouped Meter Module Configuration 34 Establishing Connection with SEM3 System 16 Water / Gas Selections 35 - Controller 16 - Save of Water / Gas Meter Selection 36 - Log in Page 16 - Water / Gas Configuration 37 SEM3TM - Embedded Micro Metering ModuleTM User Manual 1 SEM3TM - Embedded Micro Metering ModuleTM Table of Contents (cont'd.) 2 Mini Monitor Configuration 39 Dashboard 77 - Configure Mini Monitor for Multi Phase Meters 40 - Meter Dashboard 77 - One Pole Mini Monitor Configuration 42 - Group Dashboard 79 - Two Pole Mini Monitor Configuration 43 - Three Pole Mini Monitor Configuration 45 User Configuration 81 - User Profile 81 - User Management 82 Group 47 - Multiple Circuits Totalized and Alarmed 47 - Create Group 48 Tools 84 - Modify Previously Created Group 52 - Diagnostics 84 - Edit Group 52 - Modbus Map 85 - Delete Group 52 - Acknowledgement of Incorrect Installation 85 - Firmware Upgrade 86 Real Time 53 - Webpage Upgrade 87 - Real Time 53 - Meter Module Serial Numbers 88 - System Energy Usage Summary 54 - Energy Meter Consumption 54 Import Configuration 89 - Gas Meter Consumption 56 - Water Meter Consumption 57 Export Configuration 92 - Group Meter Data 57 - Clearing of kWh 58 Communications Protocol 93 - Clearing of Alarm Data 59 - BACnet 93 - Resetting of Water and Gas Pulses 60 - BACnet IP 93 - BACnet IP Settings 94 97 Logging 61 - BACnet IP Data Logs - Data Log 61 - Selecting Data Points as BACnet Objects 100 - Creating Group Data Log 61 - BACnet Foreign Device Register 101 - Viewing Active Data Logs 63 - BACnet MS-TP 102 - Creating an Individual Meter Data Log 64 - BACnet MS-TP Settings 102 - Viewing Active Individual Meter Data Logs 67 - BACnet MS-TP Data Logs 105 - Alarm Event Log 68 - Modbus TCP / IP Connection Enhancement 106 - Creating Group Alarm Event Log 69 - System Time Setup and NTP Time Synchronization 107 - Viewing Active Group Alarm Event Logs 71 - SNMP Support 107 - Creating an Individual Meter Alarm Event Log 72 - Viewing Active Individual Alarm Event Logs 74 Email 109 - System Event Log 75 - SMTP and Emailing of Logs 109 - SMTP Configuration 109 - Emailing of Logs 109 SEM3TM - Embedded Micro Metering ModuleTM User Manual SEM3TM - Embedded Micro Metering ModuleTM Table of Contents (cont'd.) Offline Configuration 110 Miscellaneous 111 - Multilingual Web Pages 111 - Site / Installation Configuration Selection 111 Troubleshooting 112 - Clearing Browser Cache 112 - Directory Structure in SD Card 112 - Diagnostic Data 113 - Alarm Log, Data Log and Group Log 114 - Event Log 114 - BACnet 114 - Dashboards 114 - BCM Webpages 114 - Export 114 - Firmware 114 - Offline 114 - User Input Field Requirements 115 - Webpage Access by User Denomination 121 - Order of Mini Monitor Data Points in Modbus Map after Configuration 123 - Menus on the Webpage in Multi-languages 124 Modbus Information 126 - SEM3 Modbus Alarm Registers 126 - Mini Monitor Data Registers 131 - SEM3 Monitor Data Registers 137 - Double Precision Energy Registers 160 These instructions do not purport to include all details or variations in equipment, nor to provide for every possible contingency that may occur in connection with installation, operation or maintenance. Should further information be desired or should particular problems which are not covered sufficiently for the purchaser's purposes, the matter should referred to the local Siemens sales offi ce. The contents of this instruction manual shall not become part of or modify any prior or existing agreement, commitment or relationship. The sales contract contains the entire obligation of Siemens. The warranty contained in the contract between the parties is the sole warranty of Siemens. Any statements contained herein do not create new warranties or modify the existing warranty. SEM3TM - Embedded Micro Metering ModuleTM User Manual 3 Introduction This manual discusses features of the SEM3 metering system and provides configuration instructions. By the time you are ready to use this guide, your meter should be installed, most basic setup should have been performed, and communications/basic operation should have been verified. If the unit is not yet installed and operational, refer to the Installation Manual available on line at www.usa.siemens.com/SEM3. This chapter provides an overview of SEM3 meters, and summarizes many of their key features. SEM3TM - Embedded Micro Metering ModuleTM The SEM3 system is designed to measure the current, voltage, and energy consumption of up to 45 circuits.1) The SEM3 consists of a controller, racks, cables, meter modules and current transformers (CTs) that can be tailored to the application. The CTs are available in solid core & split core versions and are to be mounted along the termination points of each breaker pole being metered. The conductor passes through the appropriate current sensor before terminating at the breaker. Each CT is terminated into a meter module that in turn is mounted in a rack. The racks get power from and communicate back to the controller through special cables that are part of the SEM3 product line. The SEM3 has the ability to communicate Modbus RTU/BACnet MSTP via RS485, Modbus TCP, BACnet IP, SNMP via Ethernet port to outside systems. The controller web pages are also used to configure the SEM3 system to the application. Systems info, CT ratio setting and alarms as well as configuring the meter modules into 1, 2, or 3 pole meters are all accomplished through embedded and easy to use web pages. See the SEM3 User Manual for more application specific information at www.usa.siemens.com/SEM3. 1) Some applications will allow for more than 45 poles in one enclosure by adding a second controller. Two controllers can monitor up to 90 poles. 4 SEM3TM - Embedded Micro Metering ModuleTM User Manual SEM3TM - Embedded Micro Metering ModuleTM (cont'd.) The SEM3 system is made up of the following components and options: 1. Controller - The controller is used to communicate the metered values to outside systems by way of a web page interface, Modbus RTU or Modbus TCP. One controller can manage up to 45 meter modules. The controller also has the system digital inputs for receiving pulse inputs from other metering devices as well as a digital output for the combined KWh output of the system being metered. 2. Meter Modules - There are two choices or the meter modules that are differentiated by accuracy specification. The accuracies are 1% for the standard accuracy modules and 0.2% for the high accuracy modules. The accuracy is tested in accordance to ANSI C12.20/0.5. Ordering information Controller Catalog number Main Controller US2:SEM3CONTROLLER Meter Modules Meter - Standard Accuracy 1% US2:SEM3LAMETER Meter - High Accuracy .2% US2:SEM3HAMETER Meter - Standard Accuracy 1% with US2:SEM3PLAMETER Pulse Output Meter - High Accuracy 0.2% with Pulse Output US2:SEM3PHAMETER Meter Racks Meter Rack 3 Position US2:SEM3RACK3 Meter Rack 6 Position US2:SEM3RACK6 Meter Rack 9 Position US2:SEM3RACK9 Meter Rack 15 Position US2:SEM3RACK15 3. Meter Racks - The meter modules are designed to snap into the rack assemblies. The rack assemblies are sized by how many modules will fit into each and come in 3, 6, 9, 15 and 21 module configurations. Meter Rack 21 Position US2:SEM3RACK21 4. CT or Current Transformers - The SEM3 systems have solid core CTs or split core CTs for use with the system in the following maximum amperage ranges 50, 125, 250, 400, 600, 800 and 1200 amps. These are maximum amperage ranges for normal usage but will measure accurately down to 1% of the maximum range. 5. Communication Cables - The communication cables are designed like CAT 5 cables but are insulated for use in systems up to 600 volts. The cables are for two way communication from the controller to the rack/meter modules. Cables Controller to Rack Cable - 6 Inch US2:SEM3CAB6INCH Controller to Rack Cable - 12 Inch US2:SEM3CAB12INCH Controller to Rack Cable - 24 Inch US2:SEM3CAB24INCH Controller to Rack Cable - 36 Inch US2:SEM3CAB36INCH Solid Core CTs Solid Core CT 50:0.1 US2:SEM3SCCT50 Solid Core CT 125:0.1 US2:SEM3SCCT125 Solid Core CT 250:0.1 US2:SEM3SCCT250 Solid Core CT 400:0.1 US2:SEM3SCCT400 Solid Core CT 600:0.1 US2:SEM3SCCT600 Solid Core CT 800:0.1 US2:SEM3SCCT800 Solid Core CT 1200:0.1 US2:SEM3SCCT1200 Solid Core CT 1600:0.1 US2:SEM3SCCT1600 Solid Core CT 2000:0.1 US2:SEM3SCCT2000 Split Core CTs Split Core CT 50:0.1 US2:4LSF0050 Split Core CT 125:0.1 US2:4LSF0125 Split Core CT 250:0.1 US2:4LSF0250 Split Core CT 400:0.1 US2:4LSF0400 Split Core CT 600:0.1 US2:4LSF0600 Split Core CT 800:0.1 US2:4LSF0800 Split Core CT 1200:0.1 US2:4LSF1200 Split Core CT 1600:0.1 US2:4LSF1600 Split Core CT 2000:0.1 US2:4LSF2000 1600 & 2000 Amp CTs may not currently be available. Please contact sales for availability. Please contact sales for CA Meter Module availability. SEM3TM - Embedded Micro Metering ModuleTM User Manual 5 SEM3 in an Energy Management System You can use SEM3 meters as standalone devices, but their extensive capabilities are fully realized when used with WinPM. Net software as part of an enterprise energy management (EEM) system or Powermanager software for standalone sub billing reports. EEM systems give energy suppliers, service providers, and large industrial and commercial energy consumers the tools to meet all the challenges and opportunities of the new energy environment. EEM systems use realtime information and control to directly address a broad range of requirements throughout the power delivery chain and across an entire enterprise. These systems offer an integrated solution to managing new billing structures, distributed generation, energy purchasing, energy cost control, operational and efficiency. Applications that include the meter typically require additional equipment. Display and analysis software tools are almost always used to manage, interpret and distribute the data measured by a meter. There are usually a variety of tools used, and often these tools are connected using different communications standards and protocols. In many cases, a meter must also provide control capabilities and device level data sharing. Meter Features Your meter includes an impressive array of standard features. The following is an overview of those features. Measured Parameters SEM3 meters provide fully bidirectional, 4quadrant, revenueaccurate or revenue certified energy metering. The following is a selection of some parameters measured by these meters. Energy The meters provide all common active, reactive and apparent energy parameters: kWh, kVARh, and kVAh. Energy registers can be logged automatically on a programmed schedule by a supervisory system such as WinPM.Net. 6 All energy parameters represent the total for all three phases. Energy readings are true RMS. Beyond this value, readings roll over to zero (0). Real Time Values SEM3 meter modules provide real time values, including true RMS, per phase and total for: * Voltage and current * Active power (kW) and reactive power (kVAR) * Apparent power (kVA) * Power factor and frequency Supported Protocols You can integrate the meter into various industry standard networks. Data that the meter measures can be made available to other devices using Modbus RTU, or Modbus/TCP. A digital pulse output is also available. The controller's pulse output is the total kWh for all the single phase meters whose "Accumulate Energy Enable" has been enabled in the Branch Meter Configuration Web Page. You can also configure the meter to import data from other devices (i.e. water, gas, etc.) on these networks using digital pulse inputs. With these advanced communications functions, SEM3 system can be integrated in most existing power monitoring systems. Digital I/O Options SEM3 has two digital pulse inputs built into the controller. These inputs can be used for, but are not limited to, bringing water and gas measurements into the supervisory system. The digital pulse inputs are selfexcited digital inputs capable of detecting a pulse rate of 5 pulses/second. They can be used for monitoring external contacts or pulse counting applications. These inputs use a current sensing technique to monitor contact status by providing an internal 28 VDC (4 VDC) supply supply for selfexcitation. The SEM3 utilizes the Siemens S7 1200 PLC for expanded I/O requirements. The digital pulse output can be configured as a KY or KYZ pulse output. External 24 VDC is required. The output can be configured to show total system kWh for all the meter modules monitored by the controller. Individual meters can be included or excluded from this total calculation. Upgrading Your Meter For firmware upgrades, refer to the upgrade bulletin. Communications Options The Controller includes a standard MODBUS RTU/RS-485, BACnet MSTP, MODBUS TCP, BACnet IP, SNMP, SMTP, and digital pulse Input/Output. RS-485 Connections RS485 connections are made via the capturedwire connectors on the side of the controller module. Up to 32 devices can be connected on a single RS485 bus. Each SEM3 controller counts as one device. Meters below the controller are defined by registers within the controller. Use a good quality shielded twisted pair cable for each RS485 bus. The overall length of the RS485 cable connecting all devices cannot exceed 4000 ft. (1219 m). The RS485 bus can be configured in straightline or loop topologies. SEM3TM - Embedded Micro Metering ModuleTM User Manual SEM3 in an Energy Management System (cont'd.) Digital Pulse Input Type Self-Excited (internal 28 VDC) Application Dry contact sensing Wire 16 to 28 AWG (1.3 to 0.1 mm2 ) Min. Pulse Width 100 ms Isolation to Ground 3750 VAC Digital Pulse Output Type Form A/C Wire 16 to 28 AWG (1.3 to 0.1 mm2 ) Signal Type Continuous or Pulse Max. Load Voltage 30 VDC Max. Load Current 150 mA Isolation Optically Isolated; max. 5000 V RMS isolation (UL-E91231) Controller Terminal Label Controller Label SEM3TM - Embedded Micro Metering ModuleTM User Manual 7 General bus wiring considerations Devices connected on the bus, including the meter, converter(s) and other instrumentation, must be wired as follows: * Connect the shield of each segment of the cable to ground at one end only. * Isolate cables as much as possible from sources of electrical noise. * Use an intermediate terminal strip to connect each device to the bus. This allows for easy removal of a device for servicing if necessary. RS-485 Connection Methods to Avoid Any device connection that causes a branch in the main RS485 bus should be avoided. This includes star and tee (T) methods. These wiring methods cause signal reflections that may result in interference. No more than two cables should be connected at any connection point on the RS485 bus. This includes connection points on instruments, converters, and terminal strips. Following these guidelines ensures that both star and tee connections are avoided. * Install a 1/4 Watt termination resistor (RT) between the (+) and () terminals of the device at each end point of a straight line bus. The resistor should match the nominal impedance of the RS485 cable, which is typically 120 ohms (consult the manufacturer's documentation for the cable's impedance value). Serial Connection Wiring Grounding to Controller Serial Connection Wiring Grounding to 9610 Meter 8 SEM3TM - Embedded Micro Metering ModuleTM User Manual General bus wiring considerations (cont'd.) Ethernet Connections Ethernet Connection Wiring There is an Ethernet port standard on the SEM3 controller module 10/100BASET port with an RJ45 modular connector. Note: You may add up to (4) simultaneous Modbus TCP connections. The Ethernet port is capable of data rates up to 100 Mbps and supports Modbus/TCP and BACnet IP protocol. Ethernet communications setup Using the Modbus RTU Protocol SEM3 meters can act as Modbus Slave devices, making any real time data available through the Modicon Modbus RTU protocol. Modbus Master devices connected to the meter can access (read) this data or write data to your meter's registers, making device configuration changes and initiating control actions. The Factory Modbus Slave Configuration The meter makes data available to Modbus Master devices using pre configured Modbus Slave modules. These modules are linked to other modules in the meter that provide the energy, power and demand data. Once a communications channel is configured to use Modbus RTU protocol, the data is available to Modbus Master devices. Using the Modbus/TCP Protocol Modbus/TCP is the open Modbus protocol variant (formerly called MBAP). It defines the packet structure and connection port (port 502) for the industry standard TCP/ IP protocol. The structure of Modbus/TCP is very similar to the Modbus RTU packet except that it has an extra sixbyte header and does not use the cyclic redundancy check (CRC). Modbus/TCP retains the Modbus RTU limit of 256 bytes to a packet. Modbus TCP Communications You can communicate to the meter using Modbus TCP Connect to socket 502. Refer to page 106 for more information on TCP. SEM3TM - Embedded Micro Metering ModuleTM User Manual 9 Configuring hardware There are a few steps in configuring the components of the SEM3 metering system. Current Transformer (CT) - There is no setting on the CT for the system. The CT configuration is available on SEM3 web pages. The CTs for use in the SEM3 system are 100 mA output and are self protecting/ shorting so shorting blocks are not required. Note for multi-pole meters CTs are required to have the same rating for all poles. CTs come standard with 6 foot leads that may be trimmed for neat installation or extended if required. CT wire length can retain accuracy up to 500 feet using 18 AWG twisted pair wire (UL 1015, 600v). Meter Modules - These instructions are for both levels of accuracy modules. Each meter module is a single phase meter and must be connected to the appropriately sized SEM3 system CT. The meter module should easily fit into the rack assembly and have audible clicking when locked into position. The Meter Rack has the meter module address to the controller hard coded in the hardware. Note that meter modules must be mounted contiguously in the meter racks to be configured for multi-pole circuit breakers. Gaps in the rack will not allow multi-pole meters to be configured as multi-pole meters. Each module must have the phase dip switch on the top of the module set to the phase that the CT is metering phase A, B, or C (Line 1, 2, or 3 respectively). Note - Once the meter module is placed into the meter rack and energized the phase position will be indicated by a different color LED for each position. Colors are orange for phase A (line 1), yellow for phase B (line 2), green for phase C (line 3). LED are adjacent to the phase numbers. The power indication LED also indicates communications by flashing. CT sizing for each meter module will be done through the controller web page configuration. Solid Core Split Core Power and communication indicator LED added to the top of the meter unit LED added to indicate Phase postion switch location The blue mark indicates high accuracy, and the burgundy mark indicates standard accuracy Release lever to allow easy removal from the rack. No tools required. CT wire terminals blocks. CTs will be shipped disconnected to allow custom lead length and change meter amperage. Meter Module part numbers US2:SEM3LAMETER US2:SEM3HAMETER 10 There will be two meter modules based on accuracy and not on ampacity. CT wire screw terminals SEM3TM - Embedded Micro Metering ModuleTM User Manual Configuring hardware (cont'd.) Meter Racks - The meter module racks have the addresses for the module to controller communications hard coded into them. The 9, 15 and 21 module racks have a two position dip switch for setting one of two address ranges for each. The 3 and 6 module racks have a rotary switch to allow it to be configured for multiple address ranges. The tables on the next two pages show the ranges. 3 and 9 position racks shown for demonstration Pulse output LED Meter Module with Pulse output US2:SEM3PLAMETER US2:SEM3PHAMETER Note: Pulse Output Meter Modules for regional needs in CALIFORNIA sub billing applications. Please contact sales for CA Meter Module availability. SEM3TM - Embedded Micro Metering ModuleTM User Manual 11 Configuring hardware (cont'd.) Meter Module Internal Addresses - Dip and rotary switches on the racks are used to assign the unique addresses for the meter module. Table 1 indicates rack addresses for Left setting on 9, 15 and 21 module racks and setting 0-7 on 3 meter module rack, 0-3 on 6 meter module rack. Table 2 indicates addresses for right setting on 9, 15, and 21 module racks and 8-F on 3 meter module rack, 4-7 on 6 meter module rack. Table 1 Single Phase Monitor Modbus Addresses 21 Position Rack Modbus Addresses 15 Position Rack Modbus Addresses 9 Position Rack Modbus Addresses 6 Position Rack Rotary Switch Setting 6 Position Rack Modbus Addresses 1 1 1 1 1 2 2 2 2 2 3 3 3 3 4 4 4 4 5 5 5 5 5 6 6 6 6 6 7 7 7 7 8 8 8 8 9 9 9 9 0 (8) 10 10 11 11 12 12 12 1 (9) 13 13 13 13 14 14 14 15 15 15 16 16 17 17 17 18 18 19 19 20 20 21 21 2 Open Address Space 28 1 2 10 11 13 3 14 17 4 18 19 20 21 21 5 22 23 25 26 3 25 6 27 26 27 28 29 29 30 30 29 7 31 30 31 32 Limited availability of 6 Pos racks and contact sales for availability. 12 6 9 19 22 Open Address space Open Address Space 5 15 18 27 3 12 14 25 1 9 10 26 2 7 11 24 0 3 10 23 3 Position Rack Modbus Addresses 4 11 22 3 Position Rack Rotary Switch Setting SEM3TM - Embedded Micro Metering ModuleTM User Manual Configuring hardware (cont'd.) Table 2 Single Phase Monitor Modbus Addresses 21 Position Rack Modbus Addresses 15 Position Rack Modbus Addresses 9 Position Rack Modbus Addresses 33 33 33 33 6 Position Rack Rotary Switch Setting 6 Position Rack Modbus Addresses 33 34 34 34 34 34 35 35 35 35 35 36 36 36 36 37 37 37 37 37 38 38 38 38 38 39 39 39 39 40 40 40 40 41 41 41 41 42 42 42 43 43 43 44 44 44 4 5 45 45 46 47 47 47 48 48 49 49 50 50 50 51 51 Open Address Space 6 46 49 C 50 51 52 53 D 54 55 57 59 45 B Open Address space 57 Open Address Space 42 43 51 54 56 38 41 A 53 54 60 9 47 49 58 37 43 46 55 34 35 44 45 53 8 41 42 46 52 33 39 45 53 3 Position Rack Modbus Addresses 36 46 52 3 Position Rack Rotary Switch Setting 58 7 57 E 59 58 59 60 61 61 62 62 61 F 63 62 63 The 3 and 6 module rack can be used as an extension to any of the other racks or pairs of racks. Settings must be such that no address is used more than once. Duplication of addresses will return an error on setup and it could damage meter module. SEM3TM - Embedded Micro Metering ModuleTM User Manual 13 Establishing connection with SEM3 system Controller - The controller functions as the set up interface for the system. System settings, CT ratios, PT ratios, Alarm settings, communications settings and passwords are all set using the web page interface of the controller. See installation instructions for mounting and dimensional information. Installation instruction can be found on line at www.usa.siemens.com/SEM3. To start - Connect the Controller to a PC using the Ethernet / Modbus TCP port. See figure on page 7. Open Explorer or Chrome and type out the IP address 192.168.1.65. Default user name is admin Default password is SEM3. User name and password can be set to user preference and are case sensitive. Default login brings user in at Supervisor level so that all screens can be seen and modified. It is recommended that user accounts and password be set as soon as possible. How to set user accounts is documented later in this manual. Three phase wiring Left rail QR code Right rail BACnet MSTP/ Modbus RTU via RS-485 Two energy pulse in Energy pulse out MODBUS TCP/IP & BACnet IP Log in Page - Menu Login Page 14 Menu Login Page Invalid UP SEM3TM - Embedded Micro Metering ModuleTM User Manual Settings System Settings The user can navigate to the System Settings page by hovering or clicking the mouse on the "Settings" navigation link. A drop down menu will appear which will show "System Settings" as a selection. Clicking on this selection will show the relevant webpage. Navigating to System Settings Page The system settings page provides the following: a. A screen is provided for user configuration of several system parameters and the ability to save the system configuration values in the SEM3 device. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. System Settings Page Logout NOTE: Highly recommend to use the Logout button instead of simply closing the browser session. There are several subsections on this webpage which involve significant configuration. These subsections are detailed below. SEM3TM - Embedded Micro Metering ModuleTM User Manual 15 Settings (cont'd.) IP Configuration This section allows the user to configure the IP settings for the SEM3 controller. The TCP/IP connection is used for connecting to the SEM3 controller through a web browser, connection for Modbus TCP/IP as well as BACnet over IP. By default the "Static IP" option is selected. Additionally this section also shows the following information. DHCP The user can select "DHCP" option to set the SEM3 controller to be connected in a network with DHCP services enabled. After any other configuration values have been entered, the user can click on the Save button to save the configuration for the DHCP mode. Parameter Default value IP Configuration Mode Static IP MAC address [Not user configurable] IP Address 192.168.1.65 Subnet Mask 255.255.255.0 Default Gateway 192.168.1.1 IP Configuration Subsection in System Settings SEM3TM Note The file "sem3_diagnostic_data.txt" located in the root directory of the SD card contains the basic diagnostic data related to the SEM3 controller. IP Configuration Subsection in System Settings On successful selection of DHCP mode, controller will reboot. Once rebooted, DHCP service starts and the application will retrieve IP information (IP address, gateway IP address and subnet mask) and will write it in the diagnostic data file in SD card. Static IP The user can select "Static IP" option to configure the IP address, Subnet mask and default gateway of the SEM3 controller. After the configuration values have been entered, the user can click on the Save button to save the configuration. At any point, the user can return to the last saved configuration by clicking on the "Reset" button. When the user clicks on the Save button, the webpage provides a feedback response message "The settings are saved. You have chosen to modify the IP address hence the network connection will be lost and please reconnect with the following URL. http://<new SEM3 URL>/index.html". 16 IP Configuration Save Message SEM3TM - Embedded Micro Metering ModuleTM User Manual Settings (cont'd.) The user needs to wait for about 2 minutes and be able to re-connect to the new SEM3 URL. Entering incorrect information of any of the user input field will trigger the webpage to respond with an error message. Incorrect User Input Error Message Email Configuration The Email configuration section allows user to enter the SMTP server information which will receive the emails from the connected SEM3 controller. Email Configuration Email Configuration Parameters Values SMTP Server Name IP address of the host machine, where the email server is located. Please refer to the SMTP server-client setup section. SMTP Port SMTP port for the incoming emails. Default 25 User name admin Password Admin SMTP authentication Unchecked. Email Configuration Parameters The implemented SMTP stack only supports PLAIN SMTP authentication. The SMTP server client used for testing purposes (XAMPP Mercury) does not support PLAIN authentication. So the user name and password sections are not applicable if the authentication is not checked. SEM3TM - Embedded Micro Metering ModuleTM User Manual 17 Settings (cont'd.) Modbus RTU Slave Configuration The Modbus RTU Slave configuration allows user to configure the Modbus relevant information for the SEM3 controller acting as a Modbus slave device in the Modbus RTU communication. The following parameters are configured. Modbus RTU Slave Configuration Modbus RTU Slave configuration parameters Values Modbus Address Modbus address of the slave device Configurable; In the range of 1 - 247. Default: 126 Baud Rate Baud rate of the Modbus communication Configurable. - 9600 - 19200 - 38400 Default: 38400 Parity Parity bits for the Modbus communication Configurable. - Even - Odd - None Default: Even Stop Bits Stop bits for the Modbus communication Fixed; 1 Modbus RTU Slave Configuration Utility Seal The Utility Seal section allows user to configure the setting of Utility seal. This feature if enabled will prevent the access to specific Modbus registers which are normally set as read/write registers. After the user selects Enable from the drop down menu and clicks on Save configuration, the system responds with a message "Some values are saved, but utility seal needs to be reset to change all settings values". Utility Seal Configuration Modbus register map category Modbus Registers BCMC System Registers Demand Sub-Intervals Sub-Interval Length Voltage Mode System Voltage Potential Transformer Primary The user can choose to disable the Utility seal by selecting Disabled from the drop down menu and clicking on "Save" configuration button. When the utility seal is selected to be enabled from the System settings page, the event is recorded in the Event logging page as a valid event. The disabling of utility seal is also recorded as an event. The following Modbus registers are prevented write access when Utility seal is enabled. 18 Potential Transformer Secondary Global Resets System Time Accumulate Energy Enable Breaker Rating Communication Configuration Settings Registers Time Synchronization Time Server Addressing Option Time Server IP Address Utility Seal Covered Modbus Registers Time Server Domain Name SEM3TM - Embedded Micro Metering ModuleTM User Manual Settings (cont'd.) System Time Setup The System time setup section allows user to configure the system time for the SEM3 controller. It is recommended that the user perform the correct selection of date and time when the system is first powered on. In this section, the user can choose to synchronize with an NTP server or not. If the user decides to not synchronize with an available NTP server, the system time information can be manually entered by the user. The Date user field allows user to select a specific date from a drop down calendar. The time user field allows user to enter the system time in 24 hour format. The timezone user field allows user to select a specific time zone with respect to the GMT. If the user decides to synchronize with an NTP server, the user has to enter the relevant information for the NTP server. System Time Configuration NTP Server with IP address For communicating with an NTP server through IP address, the NTP server IP address must be entered in the xxx.xxx.xxx. xxx format. The user can select a specific time zone to offset the selected time with respect to the GMT. For communicating with an NTP server through domain name, the NTP server fully qualified domain name must be entered. The fully qualified name shall be limited to 80 alphanumeric characters (dot and dash allowed). If the user enters a fully qualified domain name for the NTP server then the user shall enter the DNS server address as well. The limitation of testing using domain name NTP server is listed under the known issues section. NTP Server with Domain Name Address SEM3TM - Embedded Micro Metering ModuleTM User Manual 19 Settings (cont'd.) Web Settings The Web Settings section allows user to configure the settings related to real time page data display. After the user makes the changes, in order for the selection to be saved, the user has to click on "Save" button. Web Settings Configuration Web Settings parameters Values `Real Time' refresh interval Web page refresh rate for the Real Time page. Configurable In the range of 10 - 900 Default value: 30 Decimal Accuracy Decimal resolution for the values on the Real Time page. Configurable - 0 - 1 - 2 - 3 - 4 Default value: 2 Web Settings Configuration System Information The System information section is location for the end user to note the current system software configuration. The user has a field to enter a desired device description to help locate the physical attribute to the SEM3 controller. By default, the device description field is empty. The rest of the fields are information populated by the system when the page gets loaded correctly. The following information are listed in this section. System Information System Information Values Firmware version This lists the latest embedded firmware version currently deployed within the SEM3 controller. Serial No. Serial number of the connected SEM3 controller. Device Description User entered device description. Default: Blank Offline Configuration Support The latest offline configuration tool which supports the webpages. BACnet firmware version The latest BACnet firmware version implemented within the SEM3 controller. Bootloader Version The latest bootloader version implemented within the SEM3 controller. SNMP version The latest SNMP firmware version implemented within the SEM3 controller. Webpage version The latest webpage version implemented within the SEM3 controller. System Information 20 SEM3TM - Embedded Micro Metering ModuleTM User Manual Settings (cont'd.) Panel Configuration Panel configuration section allows user to enter the configuration related to the physical electrical attributes of the panel. There are no changes to the configuration as previously conducted in SEM3 Phase 1 software. The following parameters are available for configuration in this section. If the user chooses to make any changes, the updated configuration is saved after the user clicks on "Save" configuration button. If there are configured meter modules in 3 - Pole selection in the MultiPole configuration page and the user changes the Voltage mode from Wye, Delta to Single Phase 3 Wire, the system will respond with a message "Meter reconfiguration in Multi-Pole configuration page is required". Panel Configuration Panel Configuration Values Demand Sub interval Demand calculation sub - intervals Configurable; In the range of 1 - 65535 Default: 15 Sub - Interval Length Sub - Interval duration length in minutes Configurable; In the range of 1 - 65535 Default: 1 minute Voltage mode Voltage mode of the system Configurable - Wye - Delta - Single Phase 3W Default: Wye Line to Neutral voltage Line to Neutral voltage or Line to Line voltage Configurable Default: 208/120 Potential Transformer Primary voltage Primary Potential Transformer voltage value Configurable. Default: 120 The user has an option to enter the value as "Other" and enter a non-standard voltage value. Potential Transformer Secondary voltage Secondary Potential Transformer voltage value Fixed, 120 Panel Configuration SEM3TM - Embedded Micro Metering ModuleTM User Manual 21 Settings (cont'd.) 480Y / 277 3O 4W 600Y / 347 3O 4W 480A 3O 3W 600 3O 3W 240 / 120 1O 3W Line to neutral / Line to line (V) - Wye systems will show line to neutral voltage and delta systems will be Line to Line. Potential transformer setting Primary - If a PT is used then the primary voltage should be picked from the drop down. If no PT is used the default setting is 120 v. Secondary voltage is set to 120 v. Save - Data changes must be saved before leaving this page or it will be lost. Reset - Resets to factory defaults. 22 SEM3TM - Embedded Micro Metering ModuleTM User Manual Settings (cont'd.) Water/Gas Configuration The Water and Gas configuration section is for user to enter the S71200 PLC IP address and port number. Any change in the default value needs to be saved by clicking on the "Save" button. Water/Gas Configuration The PLC IP address must be entered in the xxx.xxx.xxx.xxx format. The port address has to be entered with a valid range between 1 - 9999. SNMP Configuration The SNMP configuration section is for user to enter the valid SNMP manager IP address. This is the IP address of the external SNMP manager expecting information from the SNMP client (SEM3 controller). SNMP Configuration The SNMP manager IP address must be entered in the xxx.xxx.xxx.xxx format. Installation Configuration Selection The Installation Configuration Selection section allows user to select one of the 3 currently available base protocol/configurations. By default the Modbus Configuration - TCP/RTU is selected. If the user intends to change the protocol, one of the remaining protocols can be selected from the drop down menu. The user has to click on Change Protocol to successfully engage the new selection. After the user clicks on the change protocol button to change the currently selected protocol, the system responds with a message "Protocol change successfully, System will be restarted in 2 minutes..." After the system reboots, the login page is automatically displayed. At this time the user can login with previously configured credentials or default credentials and login to the system. The new configuration/ protocols will be in place. Based on the selected protocols, some of the features are disabled and the navigation link will be modified accordingly. Installation Configuration Selection Additional Available Protocols SEM3TM - Embedded Micro Metering ModuleTM User Manual 23 Global settings Global settings will be applied across all the meters in the system. Each meter can be customized in the Branch meter configuration screen. The alarms are for the meters and not meter modules. Individual phase alarms can only be set for single pole meters. Alarm delays are time settings where the meter is in alarm condition before the alarm flag is set. This is to prevent momentary conditions sending alarm flags. * Over Voltage Alarm Time Delay: The time required for the over voltage alarm to enable once the voltage has risen above the setpoint. Current setpoints are a percentage of the CT rating and not the breaker rating. For example- a 20 amp breaker may have a 50 amp CT applied. For a 80% alarm on the 20 amp breaker the calculation would be - breaker rating (20 amp) X desired alarm level (80%) / CT rating (50 amps) = alarm setting (32%). * Global Phase Current Loss Alarm Enable: Enable or disable a phase current loss alarm. These settings should be set first. Settings saved will overwrite all other settings. This should be completed prior to branch meter configuration. Global Settings * Under Voltage Alarm Setpoint: The percent below nominal value deemed unacceptable for the voltage to drop below. * Under Voltage Alarm Time Delay: The time required for the under voltage alarm to enable once the voltage has fallen below the setpoint. * Over Voltage Alarm Setpoint: The percent above nominal value deemed unacceptable for the voltage to rise above. 24 * Global Over KW Demand Alarm Setpoint: The kilowatt demand deemed unacceptable. * Global Over KW Demand Alarm Time Delay: The time required for the over kw demand alarm to enable once the kW demand has risen above the setpoint. * Global Phase Current Loss Alarm Time Delay: The time required for the phase current loss alarm to enable once current is lost. * Over Current Warning Setpoint: The percent below the maximum value deemed unacceptable for the current to rise to. (As a percentage of the CT rating.) * Over Current Warning Time Delay: The time required for the over current warning to enable once the current has risen above the warning setpoint. * Over Current Alarm Setpoint: The percent below the maximum value deemed unacceptable for the current to rise to. Pulse Inputs - The SEM3 controller has (2) pulse inputs available. The Pulse input module is a highly accurate energy pulser often used for receiving the pulse inputs from the water, air, gas, and steam meters. There are two types of pulse input options are available: * Form A (KY) contacts are single-pole, single throw, normally open contacts. They have two terminals, which are open when the energizing force (magnet or relay solenoid) is NOT present. When the energizing force is present the contact will close. * Form C (KYZ) contacts are single-pole, double throw contacts. They have three terminals, a Common, a Normally Open and a Normally Closed. When the energizing force is NOT present the Common terminal is connected to the Normally Closed terminal. When energized, the Common terminal disconnects from the Normally Closed terminal and connects to the Normally Open terminal. The Form A has a Common and a Normally Closed terminal and would be used on a standard Closed Loop. The Form C would function with an Open Loop. * Over Current Alarm Time Delay: The time required for the over current alarm to enable once the current has risen above the alarm setpoint. SEM3TM - Embedded Micro Metering ModuleTM User Manual Global settings (cont'd.) kWh Pulse Output - The kWh Pulse output module is a highly accurate energy pulse output often used for sending kWh pulse outputs to third party systems. Alarm Summary - Will show values when any meter is in an alarm condition and allows the supervisor and controller level operators to view and clear alarms. Global Reset - Resets can be accomplished by supervisory or controller level users. Reset values available from the pull down are: * No reset * Begin new demand subinterval * Reset all demands * Reset all Maximum demands values to 0 * Reset Energy (kWh, kVah, kvarh) * Reset all maximum kW values to 0 * Reset pulse input 1 count to 0 * Reset pulse input 2 count to 0 * Reset all Mini-Monitor alarm flags Global Settings and Reset Registers SEM3TM - Embedded Micro Metering ModuleTM User Manual 25 Gobal settings (cont'd.) Global Alarm Settings There are several parameters which are configured under the Global Alarm parameter settings. Global Alarm Parameters Description Under Voltage Alarm Setpoint (%) Value below the percentage of the nominal voltage value that is deemed unacceptable for user. [20 - 100 %] The user can set the necessary parameter values and click "Save Global Settings" to save the values. If any of the user input field is outside the expected range, the webpage responds with a error message. Nominal voltage is 120 V. Nominal current is the amperage of the measured branch CT rating. If the setpoint values are 0, the alarms are disabled. Under Voltage Alarm Time Delay (Seconds) This is the time configured by the user for the under voltage alarm to enable once the voltage has fallen below the setpoint. [1 - 65535 seconds] Over Voltage Alarm Setpoint (%) Value above the percentage of the nominal voltage value that is deemed unacceptable for user. [100 - 120 %] Over Voltage Alarm Time Delay (Seconds) By default the alarm setpoints are set to 0, meaning the alarms are disabled. Once the settings are properly set, the user can save the settings. This is the time configured by the user for the over voltage alarm to enable once the voltage has risen above the setpoint. [1 - 65535 seconds] Global Over KW Demand Alarm Setpoint (kW) Value above the present kW demand that is deemed unacceptable for user. [1 kW - 4294 GW] Global Over KW Demand Alarm Time Delay (Seconds) This is the time configured by the user for the over kW demand alarm to enable once the present kW demand value has risen above the setpoint. [1 - 65535 seconds] Global Phase Current Loss Alarm Enable This is a configuration to enable or disable the phase current loss alarm. Global Phase Current Loss Alarm Time Delay (Seconds) This is the time configured by user for the phase current loss alarm to enable once the phase current is lost. [1 - 65535 seconds] Over Current Warning Setpoint (%) Value above the percentage of the nominal current value that is deemed unacceptable for user. (warning alarm) [20 - 80%] Over Current Warning Time Delay (Seconds) This is the time configured by the user for the over current warning to enable once the current has risen above the setpoint. [1 - 65535 seconds] Over Current Alarm Setpoint (%) Value above the percentage of the nominal current value that is deemed unacceptable for user. (Actual alarm) [20 - 100 %] Over Current Alarm Time Delay (Seconds) This is the time configured by the user for the over current alarm to enable once the current has risen above the setpoint. [1 - 65535 seconds] Pulse Input 1 input mode Pulse input 1 input mode [Disabled, Form A or Form C] Pulse Input 2 input mode Pulse input 2 input mode [Disabled, Form A or Form C] KiloWatt Hour Pulse Output mode kWh pulse output mode [Disabled, KY, KYZ] KiloWatt Hour Pulse Output scaling kWh pulse output scaling [1 Pulse every kWh, 1 Pulse every 10 kWh, 1 Pulse every 100 kWh, 1 Pulse every 1000 kWh] Global Alarm Parameter Settings 26 SEM3TM - Embedded Micro Metering ModuleTM User Manual Gobal settings (cont'd.) Global Alarm Summary In the Alarm summary section, the alarms for the entire system is displayed as a snapshot of the system. The following alarms are displayed. Global Alarm Summary Description Phase Loss Alarm Phase loss alarm in case of any branches with no current. [Yes or No] Phase Over Current Warning Phase Over current warning in case of any branches have load current higher than the warning setpoint. [Yes or No] Phase Over Current Alarm Phase Over current alarm in case of any branches have load current higher than the alarm setpoint. [Yes or No] Over KW Demand Alarm Over kW demand alarm in case of any branches have present kW demand higher than the alarm setpoint. [Yes or No] Voltage Alarm Voltage alarm showing if the voltage is higher or lower than the over voltage or under voltage alarm setpoints. [Under, No or Over] Clear Voltage Alarm If the Voltage alarm is set to either Under or Over, the button "Clear Voltage Alarm" is enabled for the user to clear the voltage alarm. Refresh button The refresh button allows the user to get the latest alarm summary. Global Alarm Summary Settings Global Resets In the Global Reset section, the user can reset a number of alarms, demands and energy values. Global Resets Description No Reset Default selection. No resets selected. Begin new Demand Sub-Interval By default, the "No Reset" option is selected. The following parameters are allowed to be reset through the Global resets section. The user has to select Global Reset to activate the reset operation. Allows the user to begin new Demand sub-interval. Reset all Demands Allows the user to reset all demands. Reset all Maximum Demand values to 0 Allows the user to reset all maximum demand values to 0. Reset Energy (kWh, kVAh, kVARh) Allows the user to reset all energy values. The energy values can be reset if the Utility seal is not selected to be enabled. Reset all Maximum Current values to 0 Allows the user to reset all maximum current values to 0. Reset all Maximum kW values to 0 Allows the user to reset all maximum kW values to 0 Reset Pulse input 1 Count to 0 Allows the user to reset the pulse input 1 count to 0. Reset Pulse input 2 Count to 0 Allows the user to reset the pulse input 2 count to 0. Reset all Mini-Monitor Alarm Flags Allows the user to reset all meter module alarm flags Global Resets Settings SEM3TM - Embedded Micro Metering ModuleTM User Manual 27 Multi-Pole Configuration The user can navigate to the MultiPole Configuration page by hovering or clicking the mouse on the "Settings" navigation link. A drop down menu will appear which will show "Multi-Pole Configuration" as a selection. Clicking on this selection will show the relevant webpage. The multi-pole configuration page provides the following: a. A screen is provided for user to configure available meter modules as a single or multi phase meter modules. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. Navigation to Multi-Pole Configuration Page d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. In this page the user can view the available meter modules presently connected with SEM3 controller. These include configured, unconfigured, unresponsive or unfilled modules. Along with the Module grid number, the module number, CT rating, pole type and accumulate energy enable option is displayed. The configured modules are color coded to represent the pole type with a legend provided underneath the system overview. The user can get a current list of modules in the system overview ("Module Detection") section by clicking on the "Refresh" button. Navigation to Multi-Pole Configuration Page The global settings should be configured prior to any branch meter configurations. These settings when saved will overwrite all other settings previously configured for individual branch meters. The various subsections of the page are described in the sections below. 28 SEM3TM - Embedded Micro Metering ModuleTM User Manual Multi-Pole Configuration (cont'd.) Configuration of Modules The user can select one or multiple modules from the "Available Modules" list and click the button "Pole 1", "Pole 2" or "Pole 3" to move the modules into appropriate pole selection. The user can click on "Save" button to save the configuration. Operations to Save Meter Configuration To save all meter modules as 1-Pole, the user has to select the concerned meter modules by using the mouse. After the selection, the user has to select Pole 1. This will move all the selected meter modules to the 1-Pole selection column. Similar selections can be performed for 2-Pole or 3-Pole. Saved Meter Configuration SEM3TM - Embedded Micro Metering ModuleTM User Manual 29 Multi-Pole Configuration (cont'd.) If the meters have been already configured as 1-Pole, 2-Pole or 3-Pole, the user can configure them back as Available meters. The user needs to select the concerned meter modules using the mouse and click on "Refresh Selected". This moves the selected meters to Available meter columns. Once the meters have been moved to the Available meter columns, the user can reconfigure the meters to other pole columns. If the System Voltage mode is set to "Single Phase 3W", and the user decides to configure a 3-Pole selection, the system provides a message " Voltage mode reconfiguration in System Settings Page is required". 3-Pole Configuration with Voltage Mode Set to Single Phase 3W 30 SEM3TM - Embedded Micro Metering ModuleTM User Manual Branch meter configuration Once the meter modules are configured as meters the Branch Meter Configuration screen will be populated with the configured meters. This screen will allow the meters to be named, enable or disable the meter to be counted in the overall system energy equation, Set the CT ratio and have individual alarms that override the global alarms. Select a meter from the chart. The meter information will show up below the chart. Selecting the meter name field will allow for the meter to be named according to the customer requirements. Names may be up to 36 characters in length. Meter accumulated energy enabled allows the user to set whether this meter is to be counted in the overall meter system energy calculation. The overall system energy is a total of all the meters in the system and can be read via Modbus or tied to the digital pulse output. CT rating will be the rating of the CT used for this meter. Note on multi-pole meters all the poles are required to have the same size CT. Mixed CT rating on a given meter are not allowed. CT ratings can be picked from the drop down menu and are 50, 125, 250, 400, 600, 800, 1200, 1600 and 2000 amps. Alarms for the individual meters can also be set on this screen. These setting will override the global setting. Save changes before leaving this screen. * These setting should be altered after the global settings have been selected. Any changes saved here will overwrite global settings, however any changes to global settings will overwrite all specific branch settings. Branch Meter Configuration Change Basic Attributes of a Branch Set Specific Branch Warnings and Alarms 1. Select a meter from the "Meter Module Details" table (meter name should be highlighted in yellow). 1. Select a meter from the "Meter Module Details" table (meter name should be highlighted in yellow). 2. Make edits: - Meter Name: Delete current name from text entry field and enter preferred name in its place. - Meter Monitor Accumulate: From the drop-down menu, select enable or disable. Note: When enabled, this will compute individual statistics and add it to the cumulative "Total" statistics located on the real time page at the top. - Breaker Rating: From the drop-down menu, select to correct breaker rating for the branch. 2. Set warnings and alarms by entering numbers in the text entry field taking note of the ranges to the right and the units of each setting. Note: "Over KW Demand Alarm Setpoint" has an additional drop-down menu that changes the units. 3. Click "Save" button. Note: The table may not show all meters. To see additional meters use the scroll bar on the side of the table, or a scroll wheel on a mouse when the pointer is overlaying the table data. 3. Click "Save" button. SEM3TM - Embedded Micro Metering ModuleTM User Manual 31 Branch meter configuration (cont'd.) The user can navigate to the Branch Meter Configuration page by hovering or clicking the mouse on the "Settings" navigation link. Navigation to Branch Meter Configuration Page A drop down menu will appear which will show "Branch Meter Configuration" as a selection. Clicking on this selection will show the relevant webpage. The branch meter configuration page provides the following: a. A screen is provided for user to configure connected and communicating meter modules either as stand alone meters or part of grouped meters. The users can configure the settings of several parameters for individual meters as well as multiple meters. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. Branch Meter Configuration Page d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. In this page the user can view the connected and communicating meter modules presently connected with SEM3 controller. By default the "All meters" option is selected. By default, the table shows all the meters which are not part of a configured group. This allows the user to perform individual meter module configuration. If the user wants to configure a meter part of a group, the Selection for "Select Group" needs to be chosen. 32 SEM3TM - Embedded Micro Metering ModuleTM User Manual Branch meter configuration (cont'd.) Individual Meter Module Configuration The user can perform individual meter module configuration by selecting the concerned meter module by using the mouse. The user can change the configuration values and click save to enable the configuration changes with the meter modules. The table to the right shows the parameters that can be changed in the meter module configuration page. When the user clicks save after making a change and if all the values are within the correct ranges, the system responds with a message "Record saved successfully". In case if the values of the parameters are entered incorrectly, the system responds with a message "Invalid value. Verify the range". Individual Meter Module Configuration The meter module listing by default will show the currently connected meter modules or 10 meter modules which ever is the lowest number. At the bottom of the listing, there are navigation links to help the user move to other pages. The user can navigate Next page by clicking on Next button. The user can navigate to Last page by clicking on Last button. If there are more than 10 meter modules connected, the meter modules are displayed in different pages, which can be accessed by typing a page number and clicking on "Go" button. Navigation to Other Pages in the Meter Module Listing Also the user can configure the number of rows shown in the first page. By default only 10 lines or meter modules are displayed. The user has an option to change the number of rows to "Show all". If the user selects to "Show all" in the Rows selection, all the connected meters are displayed. There is a navigation scroll bar showing the current position in the table. The bottom navigation bar showing Next, Last, Page and Rows selection disappears. Display of All Connected Meter Modules SEM3TM - Embedded Micro Metering ModuleTM User Manual 33 Branch meter configuration (cont'd.) Grouped Meter Module Configuration On the meter module configuration page, the user can configure meters which are part of a group. To select the corresponding groups, the user has to select "Select Groups". The drop down menu below the selection, shows all the configured groups. The user needs to select the appropriate group to see the meters which are configured as part of that group. Once the concerned group is selected by the user, the corresponding meters part of the group are displayed. The user can now select a specific meter to show the parameters and make the appropriate changes. Note: A maximum of 8 Groups can be configured. Selection of Groups in Meter Module Configuration Page The user can select individual meter or multiple meters to make modifications. These selections are possible when the values are displayed under All meters or Groups. The user can select multiple meters by pressing Ctrl button and selecting the concerned meters. The parameters available for selection remain the same (except for the meter name) as the individual or group selection under which the multiple selection is performed. Selection of Multiple Meters from a Group The table to the right shows the parameters which are configurable for the individual or grouped meter module configuration. Meter Module configuration parameters Meter Name Individual Meter Module Configuration Grouped Meter Module Configuration X (not available for multiple meter selection) X (not available for multiple meter selection) Accumulate Energy Enable X Meter Monitor CT Rating X Over KW Demand Alarm Setpoint X X Over KW Demand Alarm Time Delay X X Over Current Warning Setpoint X X Over Current Warning Time Delay X X Over Current Alarm Setpoint X X Over Current Alarm Time Delay X X Link to Pulse ouput Meter Module Configuration Parameters 34 SEM3TM - Embedded Micro Metering ModuleTM User Manual X Water / Gas Selections The water and gas meter selection and configuration is handled by two separate web pages within the SEM3 web pages. The user can navigate to the Water and Gas meter selection page by hovering or clicking the mouse on the "Settings" navigation link. Selection of Water/Gas Selection A drop down menu will appear which will show "Water/Gas Selection" as a selection. Clicking on this selection will show the relevant webpage. The Water/Gas Selection page provides the following: a. A configuration screen that allows user to select PLC pulse outputs as valid gas or water meters. A save button is provided for the user to save the configuration. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. Water/Gas Selection Page e. The drop down menu for different translated languages is provided underneath the logout text. There is a list of available PLC meters tagged "Meter List" and two columns for Water and Gas meters. SEM3TM - Embedded Micro Metering ModuleTM User Manual 35 Water / Gas Selections (cont'd.) Save of Water / Gas Meter Selection A total of 44 PLC meter values are available to be configured as Water or Gas meters pulse counts. To save a potential PLC meter value as a Water or Gas meter pulse count, the user can drag and drop multiple PLC meters as water or gas meters. Clicking on the save button will save the configuration. Response message for Save configuration SEM3TM Note A maximum of 44 PLC meter values are available to be configured as water or gas configuration. User can configure any combination of the PLC meters as Water or Gas meters. The real time data will be displayed in the real time page as long as the PLC meters are physically available. The user cannot unselect a configured water or gas meter that is already a part of a group or log (data or alarm). If the user tries to move the corresponding water or gas meters to available "Meter List", a response message will display "Selected meter is part of any active log or group. Please delete active log and group for selected meter, try again". Response for Unselecting a Meter Part of Group or Log 36 SEM3TM - Embedded Micro Metering ModuleTM User Manual Water / Gas Selections (cont'd.) Water / Gas Configuration The user can navigate to the Water and Gas Meter configuration page by hovering or clicking the mouse on the "Settings" navigation link. A drop down menu will appear which will show "Water/Gas Configuration" as a selection. Clicking on this selection will show the relevant webpage. The Water/Gas Configuration page provides the following: a. A configuration screen that allows user to assign a previously selected valid gas or water meters a name and a translation for the pulse counts. A save button is provided for the user to save the configuration. A reset button is provided for the user to revert the assignment and translation. Selection of Water/Gas configuration b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. The user can configure the previously selected water/gas meters by clicking on the button for respective meters (water or gas) and clicking on the populated meters. By default, the Water meters are shown with no meters selected. If the user clicks on one of the available PLC meters selected as water meters, the corresponding names and pulse measurement units can be changed. The pulse measurement units range from 1 to 100 units. The user can also assign a particular unit for the measurement. Water/Gas Configuration Page For example if the user selects for Water meter 1 as 5 pulse measurement units in Gallons. For every pulse count received by the controller the Real Time page will be updated by 5 Gallons for Water meter 1. SEM3TM - Embedded Micro Metering ModuleTM User Manual 37 Water / Gas Configuration For water meters the following are available unit conversions: a. Gallon, b. Cubic Feet, c. Liters or d. Cubic Meters Water Meter Configuration Options For gas meters the following are available unit conversions: a. Therm b. Btu or c. Cubic Foot After making the necessary changes for the water or gas meters the user can click "Save" to save the configurations. If any time while make changes on a particular meter, the user wants to revert back to the saved configuration, clicking the "Reset" button will clear the entries. If the user does not enter a valid entry, the webpage provides a response by highlighting the concerned entries for either the name or the pulse units. The meter name cannot be left vacant. Also the pulse units need to be within the specified ranges. 38 Gas Meter Configuration Options SEM3TM - Embedded Micro Metering ModuleTM User Manual Mini Monitor Configuration The user can navigate to the Minimonitor configuration page by hovering or clicking the mouse on the "Settings" navigation link. Navigating to Mini Monitor Configuration A drop down menu will appear which will show "Mini Monitor Configuration" as a selection. Clicking on this selection will show the relevant webpage. The mini monitor configuration page provides the following: a. A configuration screen that allows user to configure data points for a selected meter type from a Possible Mini monitor List to be included in the mini monitor grouped block called as the Mini Monitor List. A save button is provided for the user to save the configuration. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. Mini Monitor Configuration Page e. The drop down menu for different translated languages is provided. A list of configurable data points per meter pole configuration is available which can be grouped as mini monitors. This simplifies the data access of meters through Modbus by grouping selected meter data points. There are 10 Modbus registers (physical addresses) reserved for each meter in each phase configuration to be populated with selected meter data points. By default no meter data points are configured as mini monitor. If an external HMI device is connected to the SEM3 controller, the data values for the mini monitor in the HMI will be populated only after the mini monitor configuration is completed on this page. SEM3TM - Embedded Micro Metering ModuleTM User Manual 39 Mini Monitor Configuration (cont'd.) Configure Mini Monitor for Multi-Phase Meters The mini monitor configuration can be performed for 1-pole, 2-pole or 3-pole meters. By default the 1-Pole configuration is selected. The user selects the required Pole configuration by selecting the appropriate check box for Pole configuration. Based on the selection, data points will be populated in the "Possible Mini Monitor List". User can drag and drop the required data points in the "Mini Monitor List". Mini Monitor Configuration Step 1 Mini Monitor Configuration Step 2 40 SEM3TM - Embedded Micro Metering ModuleTM User Manual Mini Monitor Configuration (cont'd.) The user shall select any combination of registers which combine to populate the 10 Modbus registers. If the user selects the number of data points which exceeds the 10 Modbus registers, the webpage provides an error message "* Maximum 10 registers can be configured at time". Mini Monitor Configuration Error Response After the correct selection of number of data points, the user shall click on "Save". After the configuration is saved, the webpage provides a feedback message "Mini Monitor configuration saved successfully". The web pages will refresh after the successful save response. In the Mini Monitor List, after the webpage refreshes, the order in which the data points will be arranged in the Modbus Map will be seen. The final listing is determined by the order in which the data points have been designed in the original Modbus address map as a part of the firmware. Mini Monitor Save Success Response SEM3TM - Embedded Micro Metering ModuleTM User Manual 41 Mini Monitor Configuration (cont'd.) One Pole Mini Monitor Configuration In the one pole selection, the following data points are available for the user to configure. Reg. size Format Selectable as mini monitor data point Volts 2 Float-32 X Current 2 Float-32 X Kilowatts 2 Float-32 X Kilo-VAs 2 Float-32 X Kilo-VARs 2 Float-32 X Power Factor 2 Float-32 X Phase Angle 2 Float-32 X Kilowatt Hours 2 Float-32 X Kilo-VA Hours 2 Float-32 X Kilo-VAR Hours 2 Float-32 X Line Frequency 2 Float-32 X Present Current Demand 2 Float-32 X Maximum Current Demand 2 Float-32 Maximum Current 2 Float-32 Present Kilowatt Demand 2 Float-32 X Average Kilowatts Demand 2 Float-32 X Maximum Kilowatt Demand 2 Float-32 Maximum Total Kilowatts 2 Float-32 Average Volts 2 Float-32 Over KW Demand Alarm Setpoint 2 Uint-32 Over KW Demand Alarm Time Delay 1 Uint-16 Over Current Pre-Alarm (Warning) Setpoint 1 Uint-16 Over Current Pre-Alarm (Warning) Time Delay 1 Uint-16 Over Current Alarm Setpoint 1 Uint-16 Over Current Alarm Time Delay 1 Uint-16 Active Alarms 1 Bit Field X Kilowatt Hours 4 Float-64 X Kilowatt Hours Exported 4 Float-64 X Data Single-Phase Monitor Data Registers X Double Precision Energy Registers Kilowatt Hours Imported 4 Float-64 X Kilo VA Hours 4 Float-64 X Kilo VAR Hours 4 Float-64 X Breaker Rating 1 Uint-16 X Phase Selected 1 Uint-16 X Delta Temp (from 22 C) 2 Float-32 X Modbus Address 1 Uint-16 X Device Serial Number 16 Char-32 Firmware Version Number 4 Char-8 Single Phase Monitor Diagnostic Registers One Pole Meter Mini Monitor Data Points 42 SEM3TM - Embedded Micro Metering ModuleTM User Manual Mini Monitor Configuration (cont'd.) Two Pole Mini Monitor Configuration When the user selects 2 Pole, the corresponding data for 2 Pole is populated in the "Possible Mini Monitor List". Two Pole Selection In the two pole selection, the following data points are available for the user to configure. Data Reg. size Format Selectable as mini monitor data point Dual-Phase Monitor Data Registers Volts Phase 1 2 Float-32 X Volts Phase 2 2 Float-32 X Current Phase 1 2 Float-32 X Current Phase 2 2 Float-32 X Kilowatts Phase 1 2 Float-32 X Kilowatts Phase 2 2 Float-32 X Kilo-VAs Phase 1 2 Float-32 X Kilo-VAs Phase 2 2 Float-32 X Kilo-VARs Phase 1 2 Float-32 X Kilo-VARs Phase 2 2 Float-32 X Power Factor Phase 1 2 Float-32 X Power Factor Phase 2 2 Float-32 X Phase Angle Phase 1 2 Float-32 X Phase Angle Phase 2 2 Float-32 X Kilowatt Hours 2 Float-32 X Kilo-VA Hours 2 Float-32 X Kilo-VAR Hours 2 Float-32 X Line Frequency Phase 1 2 Float-32 X Line Frequency Phase 2 2 Float-32 X Present Current Demand Phase 1 2 Float-32 X Present Current Demand Phase 2 2 Float-32 X Maximum Current Demand Phase 1 2 Float-32 Maximum Current Demand Phase 2 2 Float-32 Continued on next page SEM3TM - Embedded Micro Metering ModuleTM User Manual 43 Mini Monitor Configuration (cont'd.) Reg. size Format Maximum Current Phase 1 2 Float-32 Maximum Current Phase 2 2 Float-32 Present Kilowatt Total Demand 2 Float-32 X X Data Selectable as mini monitor data point Dual-Phase Monitor Data Registers Average Kilowatts Total Demand 2 Float-32 Maximum Total Kilowatts Demand 2 Float-32 Maximum Total Kilowatts 2 Float-32 Total Monitor Kilowatts 2 Float-32 X Total Monitor Power Factor 2 Float-32 X Average Current of 2 phases 2 Float-32 X Average Volts 2 Float-32 Total Monitor Current 2 Float-32 X Total Monitor Kilo-VARs 2 Float-32 X X Total Monitor Kilo-VAs 2 Float-32 Over KW Demand Alarm Setpoint 2 Uint-32 Over KW Demand Alarm Time Delay 1 Uint-16 Over Current Pre-Alarm (Warning) Setpoint 1 Uint-16 Over Current Pre-Alarm (Warning) Time Delay 1 Uint-16 Over Current Alarm Setpoint 1 Uint-16 Over Current Alarm Time Delay 1 Uint-16 Active Alarms 1 Bit Field X Double Precision Energy Registers Kilowatt Hours 4 Float-64 X Kilowatt Hours Exported 4 Float-64 X Kilowatt Hours Imported 4 Float-64 X Kilo VA Hours 4 Float-64 X Kilo VAR Hours 4 Float-64 X Two Pole Meter Mini Monitor Data Points 44 SEM3TM - Embedded Micro Metering ModuleTM User Manual Mini Monitor Configuration (cont'd.) Three Pole Mini Monitor Configuration When the user selects 3 Pole, the corresponding data for 3 Pole is populated in the "Possible Mini Monitor List". Three Pole Selection In the three pole selection, the following data points are available for the user to configure. Reg. size Format Selectable as mini monitor data point Volts Phase 1 2 Float-32 X Volts Phase 2 2 Float-32 X Volts Phase 3 2 Float-32 X Current Phase 1 2 Float-32 X Current Phase 2 2 Float-32 X Current Phase 3 2 Float-32 X Kilowatts Phase 1 2 Float-32 X Kilowatts Phase 2 2 Float-32 X Kilowatts Phase 3 2 Float-32 X Kilo-VAs Phase 1 2 Float-32 X Kilo-VAs Phase 2 2 Float-32 X Kilo-VAs Phase 3 2 Float-32 X Kilo-VARs Phase 1 2 Float-32 X Kilo-VARs Phase 2 2 Float-32 X Kilo-VARs Phase 3 2 Float-32 X Power Factor Phase 1 2 Float-32 X Power Factor Phase 2 2 Float-32 X Power Factor Phase 3 2 Float-32 X Phase Angle Phase 1 2 Float-32 X Phase Angle Phase 2 2 Float-32 X Phase Angle Phase 3 2 Float-32 X Kilowatt Hours 2 Float-32 X Kilo-VA Hours 2 Float-32 X Kilo-VAR Hours 2 Float-32 X Data Three-Phase Monitor Data Registers Continued on next page SEM3TM - Embedded Micro Metering ModuleTM User Manual 45 Mini Monitor Configuration (cont'd.) Reg. size Format Selectable as mini monitor data point Line Frequency Phase 1 2 Float-32 X Line Frequency Phase 2 2 Float-32 X Line Frequency Phase 3 2 Float-32 X Present Current Demand Phase 1 2 Float-32 X Present Current Demand Phase 2 2 Float-32 X Present Current Demand Phase 3 2 Float-32 X Maximum Current Demand Phase 1 2 Float-32 Maximum Current Demand Phase 2 2 Float-32 Maximum Current Demand Phase 3 2 Float-32 Maximum Current Phase 1 2 Float-32 Maximum Current Phase 2 2 Float-32 Maximum Current Phase 3 2 Float-32 Present Kilowatt Total Demand 2 Float-32 X Average Kilowatts Total Demand 2 Float-32 X Maximum Total Kilowatts Demand 2 Float-32 Maximum Total Kilowatts 2 Float-32 Total Monitor Kilowatts 2 Float-32 X Total Monitor Power Factor 2 Float-32 X Average Current of 3 phases 2 Float-32 X Average Volts 2 Float-32 Total Monitor Current 2 Float-32 X Total Monitor Kilo-VARs 2 Float-32 X Total Monitor Kilo-VAs 2 Float-32 X Over KW Demand Alarm Setpoint 2 Uint-32 Over KW Demand Alarm Time Delay 1 Uint-16 Over Current Pre-Alarm (Warning) Setpoint 1 Uint-16 Over Current Pre-Alarm (Warning) Time Delay 1 Uint-16 Over Current Alarm Setpoint 1 Uint-16 Over Current Alarm Time Delay 1 Uint-16 Active Alarms 1 Bit Field X Kilowatt Hours 4 Float-64 X Kilowatt Hours Exported 4 Float-64 X Data Three-Phase Monitor Data Registers Double Precision Energy Registers Kilowatt Hours Imported 4 Float-64 X Kilo VA Hours 4 Float-64 X Kilo VAR Hours 4 Float-64 X Three Pole Meter Mini Monitor Data Points 46 SEM3TM - Embedded Micro Metering ModuleTM User Manual Group Multiple Circuits Totalized and Alarmed The user can navigate to the Group page by clicking on the "Group" navigation link. Navigation to Group Page The group page provides the following: a. A configuration screen that allows user to select meters (energy, gas and water) to be part of a group for totalized display of values and alarms based on the location where the meters are installed. A save button is provided for the user to save the configuration. The user can modify or delete previously created groups. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. By default, the "Select Group" option is selected. Group Selection SEM3TM - Embedded Micro Metering ModuleTM User Manual 47 Group (cont'd.) Create Group To create a group, the user needs to click on the "Create Group" radio button. By default "Energy" meters are selected in the drop down menu under "Meter Type". Selection of "Create Group" will populate all configured meter modules in the "Active Meter List". The available but not configured meter modules are not shown under the "Active Meter List". Create Group The user can drag and drop several meters from "Active Meter List" to "Selected Meter List". The user can associate a name with the group in the user field "Group Name". If the user does not enter a valid name or leaves the field blank and attempts to save the group by clicking "Save Group", the webpage responds with highlighting the "Group Name". The user needs to enter a correct name to save the group. Creation of Group with No Name 48 SEM3TM - Embedded Micro Metering ModuleTM User Manual Group (cont'd.) The user may want to add Water or Gas meters to the group as well. For this the user needs to select "Water" or "Gas" from the drop down menu under Meter type. This will populate the available water or gas meters depending on the selection. Water Meter Selection in Group The user can drag and drop several meter from "Active Meter List" to "Selected Meter List" for water and gas meters depending on the installation. After the selections are complete, the user needs to enter a correct name and click on "Save Group" to complete the creation of Group. The webpage provides a feedback on the successful saving of group. Group Save Operation SEM3TM - Embedded Micro Metering ModuleTM User Manual 49 Group (cont'd.) Group Save Success Complete The created groups are located in the dropdown menu under the "Select Group". SEM3TM Note At one time, user can configure a maximum of 8 groups of meters (energy, water and gas). The group name has to be unique. Configuring Max Number of Groups 50 SEM3TM - Embedded Micro Metering ModuleTM User Manual Group (cont'd.) If however the user creates more than the maximum allowed number of groups, the webpage returns an error message when the 9th group is created and saved. The error message says that "Group Limit exceeded to maximum, please delete some group and try again". Response for Configuring Groups More Than Allowed The user can delete one of the previously created groups and create the new one. The user has to create a unique name for the each group. If the user creates a group name with a name currently associated with previous groups, the webpage responds with a message "Group with this name already exist, please change group name". Response for Configuring Same Group Name SEM3TM - Embedded Micro Metering ModuleTM User Manual 51 Group (cont'd.) Modify Previously Created Group In the group page, a previously created group can also be modified. The user needs to click on "Select Group". From the drop down menu, the concerned group can be selected. Edit Group If the user intends to edit the selected group, clicking on "Edit" button will populate the active meters, selected meters and group name for editing purposes. After the editing the group, the user needs to click on "Save Group" to save the new changes. Delete Group If the user wants to delete the selected group, clicking on "Delete" button will delete the group. A follow-up message appears requesting confirmation of the action. If the user intends to delete the group, the user needs to click on "Yes". A webpage response confirming the delete is returned. If the user does not intend to delete the group, the user needs to click on "No". No additional response occurs. Additionally if a group is previously enabled for group logging, the user cannot delete the group until the logging is disabled. If the user tries to delete a group involved in active logging, the webpage responds with an error message "Logging for this group is in progress, so you can't delete this group". Response for Deleting a Group Involved in Active Logging 52 SEM3TM - Embedded Micro Metering ModuleTM User Manual Real Time Real Time The user can navigate to the real time page by clicking on the navigation bar link for "Real Time". Navigation to Real Time Page The real time page provides the following: a. A display screen that allows user to view specific parameter values for all connected and communicating meters. The user can see the parameter values of all meters which are part of specific groups. The summary of system energy usage is shown in this page as well. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. By default the "All Meters" option is chosen. The real time update/refresh time period is defined by the `Real Time' refresh interval under Web Settings in the System Settings page. The time period is defined as a parameter in seconds with a range between 10 - 900 seconds. Additionally the resolution of the meter value decimal points is defined by the Decimal accuracy under Web Settings in the System Settings page. The decimal accuracy is configurable parameter with a value between 0 - 4. Real Time Page The real time page shows the constantly updated information for all configured and responding modules. The real time page shows several basic information for all meters by default and if chosen for grouped meters. SEM3TM - Embedded Micro Metering ModuleTM User Manual 53 Real Time (cont'd.) System Energy Usage Summary At the top section, the system energy usage summary parameters are displayed for ease of viewing. The following table details the information that are shown. Adjacent to the summary of energy usage values, there is a user input button to Reset kWh. This button is used to clear the kWh accumulation values for selected meters. Underneath the summary of energy usage values, a grid of table listing shows specific relevant information for energy meters, gas meters and water meters. The user can navigate between the different types of meters by clicking on the corresponding buttons. The active table is highlighted to show the relevant meter type. Energy Meter Consumption A summary of the basic parameters of the energy meters connected to the system controller is shown under the energy meter consumption grid. If the meters are connected to the controller but have not been configured in the Meter module configuration page, the values are displayed as -NC-. For the Energy Meters, the following information shown are in the table. System Energy Usage summary parameters Values Total System kilo Watt Hours Summation of all meter module kWh values which are set to accumulate energy. Total System kilo - VAR hours Summation of all meter module kVARh values which are set to accumulate energy Voltage Alarm Set to "No" for no active voltage alarm. Set to "Under" for under voltage alarm. Set to "Over" for over voltage alarm. Total System Water consumption Summation of all configured water meter consumption values in Gallons Total System Gas consumption Summation of all configured gas meter consumption values in Btu System Energy Usage Consumption Summary Energy Meter consumption summary parameters Values Volts Line Voltage (Line to neutral for single phase/ Line to Line for multi-phase meter configurations) in volts Current Current in amperes Kilowatts Kilowatts in kW Kilowatt Hours Kilowatt hours in kWh Phase configuration of meters For multi-phase configuration, there is a visual diagram showing the multiple meters which are part of the multi-phase. Phase selection Meter module phase selection as per the physical selection by the user (A, B or C) kWh reset check box A check box for allowing user input to reset the kWh for specific or multiple meter modules. Alarms This location shows the color coded alarm boxes to signify the presence of specific alarms. - Phase loss alarm - Phase over current warning - Phase over current alarm - Over kW demand alarm Energy Meter Consumption Summary Parameters 54 SEM3TM - Embedded Micro Metering ModuleTM User Manual Real Time (cont'd.) When the individual meter module grid is selected by the user an additional expanded view of meter module parameters are displayed on the right side of the page. Real Time Page Expanded View The parameters which are viewable in the expanded view are shown in the table to the right. The clearing of alarms are discussed in a section below. The clearing of the kWh values are discussed in a section below. Energy Meter consumption parameters Values Volts Line Voltage (Line to neutral for single phase/ Line to Line for multi-phase meter configurations) in volts Current Current in amperes Kilowatts Kilowatts in kW Volt-Amperes Volt-Amperes in VA Volt-Amperes reactive Volt-Amperes reactive in var. Power factor Power factor displayed as a value between 1 to 1. Phase angle Phase angle in degrees () Kilowatt Hours Kilowatt hours in kWh Kilo-VA hours Kilo volt-amperes in kVAh Kilo-VAR hours Kilo volt-ampere reactive in kVARh Line frequency Line frequency in Hz Present Current Demand Present current demand in amperes Max current demand Maximum current demand in amperes Max current Maximum current in amperes Present Kilowatt Demand Present kilowatt demand in kW Ave. Kilowatt Demand Average kilowatt demand in kW Max. Kilowatt Demand Maximum kilowatt demand in kW Max. Total Kilowatts Maximum total kilowatts in kW Avg. Volts Average voltage in volts Over kW Demand Alarm Setpoint Over kW Demand alarm setpoint in kW Over kW Demand Alarm Time Delay Over kW Demand alarm time delay in seconds Over Current warning setpoint Over current warning setpoint in % Over Current warning time delay Over current warning time delay in seconds Over Current alarm setpoint Over current alarm setpoint in % Continued on next page SEM3TM - Embedded Micro Metering ModuleTM User Manual 55 Real Time (cont'd.) Energy Meter consumption parameters Values Over Current alarm time delay Over current alarm time delay in seconds Active alarms Active alarms in bit field values kWh exported Exported energy values in kWh kWh imported Imported energy values in kWh Absolute kWh Absolute kWh values (summation of the absolute values of the kWh exported and imported) Total Monitor kilowatts Total monitor kilowatts in kW Total Monitor Power factor Total monitor power factor Average current of phases Average current of phases in amperes Total monitor current Total monitor current in amperes Total monitor VARs Total monitor volt-ampere reactive in var Total monitor VAs Total monitor volt-ampere in va Alarm data Shows the individual alarm per phase for the meter module for the following alarms. - Phase loss alarm - Phase over current warning - Phase over current alarm - Over kW demand alarm Energy Meter Expanded View Parameters Gas Meter Consumption If the user clicks on the navigation link for Gas meters, the configured Gas Meters are displayed. The grid shows the consumption of the configured gas meters in configured units. The configuration of the gas meters is performed in the water/gas meter selection page. The units are configured in the Water/Gas configuration page. Next to the configured meter display there is a check box for clearing the pulse counts. The resetting of the pulse counts is discussed in a section below. Gas Meter Real Time Page 56 SEM3TM - Embedded Micro Metering ModuleTM User Manual Real Time (cont'd.) Water Meter Consumption If the user clicks on the navigation link for Water meters, the configured Water meters are displayed. The grid shows the consumption of the configured water meters in configured units. The configuration of the water meters is performed in the water/gas meter selection page. The units are configured in the water/gas configuration page. Next to the configured meter display there is a check box for clearing the pulse counts. The resetting of the pulse counts is discussed in a section below. Water Meter Real Time page Group Meter Data The real time page display shows the information for all meters by default. If the user wants to see the relevant information for a particular grouped meter the following steps are to be followed. The user needs to select "Select Group" as the selection on the top of the page. After the group selection, the user has to select an active group from the drop down menu. If no groups are available, the user can not invoke a display for a group. Selection of Group Meter Display in Real Time Page SEM3TM - Embedded Micro Metering ModuleTM User Manual 57 Real Time (cont'd.) Once the user selects a valid group, the corresponding meters which are part of the configured group are displayed. The display parameters are similar to the individual meters. The main difference is that in group meter display, the reset kilowatt hour feature applies to all the meters in the group. Similarly under the group data display feature, the user can navigate to the Gas meters or Water meters to view the display of data from the configured meters which are part of the concerned group. Group Meter Real Time Page Clearing of kWh The user can clear the kWh reading values in Supervisor mode. To clear the kWh reading for individual meter, the user needs to select the checkbox for the particular meter module. Clearing Individual Meter kWh 58 SEM3TM - Embedded Micro Metering ModuleTM User Manual Real Time (cont'd.) The user needs to click on Reset kWh to clear the kWh reading for the corresponding meter. If the user intends to clear all the kWh values for all connected meters, the check box under neath the KWH reset can be checked, which will automatically put check boxes on all the meters of the corresponding column. The user can choose to check the check box for the neighboring column as well. Once all the meters which need to have their kWh reset, have been selected, the user can reset the kWh by clicking on the Reset KWH button. In case of a group meter data, as previously described, clicking on Reset KWH will reset the energy calculated by the corresponding meter modules part of the group. Cleared kWh in Real Time Page Clearing of Alarm Data The alarm data is shown as part of the expanded view of the meter modules. In this case the user can get a summary of the alarm conditions present for the concerned meter. The user can get a snapshot of alarm conditions currently seen by the respective meter. If the user wants to acknowledge the alarms, he can do so by clicking on the Clear Alarm button. Clicking on clear alarm button clears the current registered alarms for the meter. Alarm Conditions in Expanded View SEM3TM - Embedded Micro Metering ModuleTM User Manual 59 Real Time (cont'd.) Resetting of Water and Gas Pulses The user can also reset the water and gas pulses registered with the controller. On the gas or water meter consumption summary page check boxes are present next to the meter details. If the user chooses to select individual meters for resetting of pulses, the corresponding check box needs to be selected. After selecting the particular check box, the user needs to click on "Reset Pulse" button to clear the pulses for the respective meter. The user can get a snapshot of alarm conditions currently seen by the respective meter. If the user wants to acknowledge the alarms, he can do so by clicking on the Clear Alarm button. Clicking on clear alarm button clears the current registered alarms for the meter. Resetting of Water and Gas Pulses The user can also reset the water and gas pulses registered with the controller. On the gas or water meter consumption summary page check boxes are present next to the meter details. If the user chooses to select individual meters for resetting of pulses, the corresponding check box needs to be selected. After selecting the particular check box, the user needs to click on "Reset Pulse" button to clear the pulses for the respective meter. If the user chooses to reset the pulses of all meters, check box underneath Clear pulse needs to be checked. This will cause all check boxes to be populated. After this the user needs to click on Reset Pulse button to clear all the pulses. If the command is sent successfully, the system responds with a message "Pulse reset successfully" and the page refreshes to show the pulses cleared. 60 Clearing of Water Meter Pulses SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging The logging features enable the ability for the user to create logs of data related to individual meters and also groups of meters. The logs can be tailored to the specific requirements of the users pertaining to the parameters logged , the periodicity of the logs, how long the log needs to be active and also configuring the logs to be emailed to specific users. The group logs are arranged with color coding to highlight a group name and log name. Data Log The user can navigate to the Data Logging page by hovering or clicking the mouse on the "Logging" navigation link. Navigating to Data Logging page A drop down menu will appear which will show "Data Log" as a selection. Clicking on this selection will show the relevant webpage. The data log page provides the following: a. The page allows user to log metering data based on various configuration. User will be able to configure maximum 16 data logs based on particular application. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. Once data log is enabled, the SEM3 controller periodically writes the values of specific data points to files on the SDIO card. User can download and delete data logs if required. The data log files are stored under the DataLog directory in the SD card. By default the Select Group radio button is selected. A drop down menu is available for the user to select previously created Groups. Selection of Group in Data Log Configuration Creating Group Data Log To create a group data log, the user has to ensure the radio button next to Select Group is selected. From the drop down menu, the user can select previously created groups. Selecting a particular group causes the individual meters which are part of the group to be populated in the Active meter column. SEM3TM - Embedded Micro Metering ModuleTM User Manual 61 Logging (cont'd.) Group Data Log Parameters Values Data to be logged in Fixed - Kilowatt Hours Total, - kVARs Total, - Maximum Kilowatt Demand, - Water pulse count total, - Gas pulse count total. Period (in minutes) Interval during which log will be captured. Configurable - 1, - 5, - 10, - 15, - 20, - 30, - 60. Default: 15 minutes Depth (in between 1 to 4320 hours) How much time [in hours] or elements [in lines] will the log capture. User input field. Default: blank End of period effect Radio button selection of Rollover or Stop. If rollover is selected, the log will start capturing information from the first line, after the depth criteria (hours/lines) is met. If stop is selected, the log will stop capturing information after the depth criteria (hours/lines) is met. Default: Rollover Log Name User input field. Default: blank Email Logs to (Optional) Email address to whom the notification logs are to be sent. Configurable selection of email address of configured users for the SEM3 controller with valid emails. Default: No selection. Email Notification Schedule (Optional) Configurable - Every Day, - Every Week, - Every Month. Default: No selection. Schedule Notification time/day/date (Optional) Once the Email notification schedule is selected, the schedule notification time is accordingly populated. By default: not shown. If user selects Every day as the schedule, the Daily schedule notification time shows 00 - 23 hours. If user selects Every Week as the schedule, the Weekly schedule notification day shows Sunday - Saturday. If user selects Every Month as the schedule, the Monthly schedule notification date shows 01 - 30 days. The last day (30 day) selection will cause the data to be sent on the last day for the month. Group Data log points 62 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) The user can further choose the period, depth, end of period effect, log name, email address to send the logs to, email notification schedule and time for the data log. The user can save the configuration to complete the creation of the Group data log by clicking on "Start Logging" button. After the SEM3 controller successfully saves the information, the message from the system returns "Log saved successfully". Group Data Log Configuration Viewing Active Data Logs The user can view the Active group Data logs by clicking on View Active Logs if the radio selection button is set for Select Group. View Active Group Logs SEM3TM - Embedded Micro Metering ModuleTM User Manual 63 Logging (cont'd.) The Active Group Data logs page shows the active logs for the configured groups. The user has the option to Delete a log, Download a log as a csv file to connected computer, Disable the log, Send the log to the configured user immediately. The group name and log name are highlighted by separate colors. Active Group Data Logs Creating an Individual Meter Data Logs To create an individual meter data log, the user has to ensure the radio button next to Create Log is selected. From the drop down menu, the user can select either Single/ Two/Three Phase meters. Selecting a phase causes the individual meters which are configured as the respective phases to be populated in the active meter column. Individual Meter Data Log Configuration 64 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) Individual Meter Data Log Parameters Values Data to be logged in User configurable. See table below. Period (in minutes) Interval during which log will be captured. Configurable [1, 5, 10, 15, 20, 30, 60]. Default: 15 minutes Depth (in between 1 to 4320 hours) How much time [in hours] or elements [in lines] will the log capture. User input field. Default: blank End of period effect Radio button selection of Rollover or Stop. If rollover is selected, the log will start capturing information from the first line, after the depth criteria (hours/lines) is met. If stop is selected, the log will stop capturing information after the depth criteria (hours/lines) is met. Default: Rollover Log Name User input field. Default: blank Email Logs to (Optional) Email address to whom the notification logs are to be sent. Configurable selection of email address of configured users for the SEM3 controller with valid emails. Default: No selection. Email Notification Schedule (Optional) Configurable [Every Day, Every Week, Every Month]. Default: No selection. Schedule Notification time/day/date (Optional) Once the Email notification schedule is selected, the schedule notification time is accordingly populated. By default: not shown. If user selects Every day as the schedule, the Daily schedule notification time shows 00 - 23 hours. If user selects Every Week as the schedule, the Weekly schedule notification day shows Sunday - Saturday. If user selects Every Month as the schedule, the Monthly schedule notification date shows 01 - 30 days. The last day (30 day) selection will cause the data to be sent on the last day for the month. Individual Meter Data Log Points SEM3TM - Embedded Micro Metering ModuleTM User Manual 65 Logging (cont'd.) The user can further choose the data log parameters, period, depth, end of period effect, log name, email address to send the logs to, email notification schedule and time for the data log. The user can save the configuration to complete the creation of the Individual meter data log by clicking on "Start Logging" button. After the SEM3 controller successfully saves the information, the message from the system returns "Log saved successfully". Single Phase Two Phase Three Phase Volts Volts Phase 1 Volts Phase 1 Volts Phase 2 Volts Phase 2 Volts Phase 3 Current Current Phase 1 Current Phase 1 Current Phase 2 Current Phase 2 Current Phase 3 Kilowatts Kilowatts Phase 1 Kilowatts Phase 1 Kilowatts Phase 2 Kilowatts Phase 2 Kilowatts Phase 3 Kilo-VAs Kilo-VAs Phase 1 Kilo-VAs Phase 1 Kilo-VAs Phase 2 Kilo-VAs Phase 2 Kilo-VAs Phase 3 Kilo-VARs Kilo-VARs Phase 1 Kilo-VARs Phase 1 Kilo-VARs Phase 2 Kilo-VARs Phase 2 Kilo-VARs Phase 3 Power Factor Power Factor Phase 1 Power Factor Phase 1 Power Factor Phase 2 Power Factor Phase 2 Power Factor Phase 3 Phase Angle Phase Angle Phase 1 Phase Angle Phase 1 Phase Angle Phase 2 Phase Angle Phase 2 Phase Angle Phase 3 Kilowatt Hours Kilowatt Hours Kilowatt Hours Kilo-VA Hours Kilo-VA Hours Kilo-VA Hours Kilo-VAR Hours Kilo-VAR Hours Kilo-VAR Hours Line Frequency Line Frequency Phase 1 Line Frequency Phase 1 Line Frequency Phase 2 Line Frequency Phase 2 Line Frequency Phase 3 Present Current Demand Present Current Demand Phase 1 Present Current Demand Phase 1 Present Current Demand Phase 2 Present Current Demand Phase 2 Present Current Demand Phase 3 Maximum Current Demand Maximum Current Demand Phase 1 Maximum Current Demand Phase 1 Maximum Current Demand Phase 2 Maximum Current Demand Phase 2 Maximum Current Demand Phase 3 Maximum Current Maximum Current Phase 1 Maximum Current Phase 1 Maximum Current Phase 2 Maximum Current Phase 2 Maximum Current Phase 3 66 Present Kilowatt Demand Present Kilowatt Total Demand Present Kilowatt Total Demand Average Kilowatt Demand Average Kilowatts Total Demand Average Kilowatts Total Demand Maximum Kilowatt Demand Maximum Total Kilowatts Demand Maximum Total Kilowatts Demand Maximum Total Kilowatts Maximum Total Kilowatts Maximum Total Kilowatts SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) Single Phase Two Phase Three Phase Average Volts Average Volts Average Volts Total Monitor Kilowatts Total Monitor Kilowatts Total Monitor Power Factor Total Monitor Power Factor Average Current of 2 phases Average Current of 3 phases Total Monitor current Total Monitor current Total Monitor Kilo-VARs Total Monitor Kilo-VARs Total Monitor Kilo-VAs Total Monitor Kilo-VAs Parameters Available for Individual Meter Data Log Configuration Viewing Active Individual Meter Data Logs The user can view the Active Individual Data logs by clicking on View Active Logs if the radio selection button is set for Create Log. View Active Individual Meter Data Logs The Active Individual Data logs page shows the active logs for the configured meters. The user has the option to Delete a log, Download a log as a csv file to connected computer, Disable the log, send the log to the configured user immediately. Active Individual Meter Data Logs SEM3TM Note At one time, user can configure a maximum of 16 data logs. The data log name has to be unique. SEM3TM - Embedded Micro Metering ModuleTM User Manual 67 Logging (cont'd.) Alarm Event Log The user can navigate to the Alarm Logging page by hovering or clicking the mouse on the "Logging" navigation link. Navigating to Alarm Logging page A drop down menu will appear which will show "Alarm Event Log" as a selection. Clicking on this selection will show the relevant webpage. The alarm event log page provides the following: a. The page allows user to log alarms based on various configuration. User will be able to configure maximum 8 alarm event logs based on particular application. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. Once alarm log is enabled, the SEM3 controller writes the values of alarm data points when they occur to files on the SDIO card. User can download and delete alarm logs if required. The alarm log files are stored under the AlarmLog directory in the SD card. Alarm Log Page By default the Select Group radio button is selected. A drop down menu is available for the user to select previously created Groups. 68 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) Creating Group Alarm Event Log To create a group alarm event log, the user has to ensure the radio button next to Select Group is selected. From the drop down menu, the user can select previously created groups. Selecting a particular group causes the individual meters which are part of the group to be populated in the Active meter column. This activity is similar to the figure shown in the Data log section. Alarm Event Log Details SEM3TM - Embedded Micro Metering ModuleTM User Manual 69 Logging (cont'd.) The user can further choose the depth, end of depth effect, log name, email address to send the logs to, email notification schedule and time for the alarm event log. The user can save the configuration to complete the creation of the Group alarm event log by clicking on "Start Logging" button. After the SEM3 controller successfully saves the information, the message from the system returns "Log saved successfully". Group Alarm Log Parameters Values Data to be logged in Fixed - Over KW Demand Alarm, - Phase Over Current Alarm, - Phase Over Current Pre-Alarm (Warning), - Phase Loss (0 amps) Alarm Depth (in between 1 to 4320 lines) How much lines/events/elements [in lines] will the log capture. User input field. Default: blank End of period effect Radio button selection of Rollover or Stop. If rollover is selected, the log will start capturing information from the first line, after the depth criteria (lines) is met. If stop is selected, the log will stop capturing information after the depth criteria (lines) is met. Default: Rollover Log Name User input field. Default: blank Email Logs to (Optional) Email address to whom the notification logs are to be sent. Configurable selection of email address of configured users for the SEM3 controller with valid emails. Default: No selection. Email Notification Schedule (Optional) Configurable - Every Day, - Every Week, - Every Month. Default: No selection. Schedule Notification time/day/date (Optional) Once the Email notification schedule is selected, the schedule notification time is accordingly populated. By default: not shown. If user selects Every day as the schedule, the Daily schedule notification time shows 00 - 23 hours. If user selects Every Week as the schedule, the Weekly schedule notification day shows Sunday - Saturday. If user selects Every Month as the schedule, the Monthly schedule notification date shows 01 - 30 days. The last day (30 day) selection will cause the data to be sent on the last day for the month. Group Alarm Event Log Points 70 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) Viewing Active Group Alarm Event Logs The user can view the Active group alarm event logs by clicking on View Active Logs if the radio selection button is set for Select Group. View Active Group Alarm Event Logs The Active Group alarm event logs page shows the active logs for the configured groups. The user has the option to Delete a log, Download a log as a csv file to connected computer, Disable the log, Send the log to the configured user immediately. The group name and log name are highlighted by separate colors. On the active alarm event log page, the earliest created log is displayed on top with its details shown. If the user intends to view other logs, they can click on the other log names (either group names or log names) to see the details. All Active Group Alarm Event Logs SEM3TM - Embedded Micro Metering ModuleTM User Manual 71 Logging (cont'd.) Creating an Individual Meter Alarm Event Log To create an individual meter alarm event log, the user has to ensure the radio button next to Create Log is selected. From the drop down menu, the user can select either Single/Two/Three Phase meters. Selecting a phase causes the individual meters which are configured as the respective phases to be populated in the active meter column. Individual Meter Alarm Event Log Configuration 72 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) Individual Meter Data Log Parameters Values Data to be logged in User configurable. See table below. Depth (in between 1 to 4320 lines) How many elements [in lines] will the log capture. User input field. Default: blank End of period effect Radio button selection of Rollover or Stop. If rollover is selected, the log will start capturing information from the first line, after the depth criteria (hours/lines) is met. If stop is selected, the log will stop capturing information after the depth criteria (hours/lines) is met. Default: Rollover Log Name User input field. Default: blank Email Logs to (Optional) Email address to whom the notification logs are to be sent. Configurable selection of email address of configured users for the SEM3 controller with valid emails. Default: No selection. Email Notification Schedule (Optional) Configurable Every Day, Every Week, Every Month. Default: No selection. Schedule Notification time/day/date (Optional) Once the Email notification schedule is selected, the schedule notification time is accordingly populated. By default: not shown. If user selects Every day as the schedule, the Daily schedule notification time shows 00 - 23 hours. If user selects Every Week as the schedule, the Weekly schedule notification day shows Sunday - Saturday. If user selects Every Month as the schedule, the Monthly schedule notification date shows 01 - 30 days. The last day (30 day) selection will cause the data to be sent on the last day for the month. Individual Meter Alarm Event Log Points SEM3TM - Embedded Micro Metering ModuleTM User Manual 73 Logging (cont'd.) The user can further choose the event log parameters, depth, end of period effect, log name, email address to send the logs to, email notification schedule and time for the data log. The user can save the configuration to complete the creation of the Individual meter alarm event log by clicking on "Start Logging" button. After the SEM3 controller successfully saves the information, the message from the system returns "Log saved successfully". Single Phase Two Phase Three Phase Phase 1 Loss (0 amps) Alarm Phase 1 Loss (0 amps) Alarm Phase 1 Loss (0 amps) Alarm Phase 2 Loss (0 amps) Alarm Phase 2 Loss (0 amps) Alarm Phase 3 Loss (0 amps) Alarm Phase 1 Over Current Pre-Alarm Phase 1 Over Current Pre-Alarm Phase 1 Over Current Pre-Alarm (Warning) (Warning) (Warning) Phase 2 Over Current Pre-Alarm Phase 2 Over Current Pre-Alarm (Warning) (Warning) Phase 3 Over Current Pre-Alarm (Warning) Phase 1 Over Current Alarm Phase 1 Over Current Alarm Phase 1 Over Current Alarm Phase 2 Over Current Alarm Phase 2 Over Current Alarm Phase 3 Over Current Alarm Over KW Demand Alarm Over KW Demand Alarm Over KW Demand Alarm Under Voltage Alarm Under Voltage Alarm Under Voltage Alarm Over Voltage Alarm Over Voltage Alarm Over Voltage Alarm Parameters Available for Individual Meter Alarm Event Log Configuration Viewing Active Individual Alarm Event Logs The user can view the Active Individual Alarm Event logs by clicking on View Active Logs if the radio selection button is set for Create Log. View Active Individual Meter Alarm Logs 74 SEM3TM - Embedded Micro Metering ModuleTM User Manual Logging (cont'd.) The Active Individual Data logs page shows the active logs for the configured meters. The user has the option to Delete a log, Download a log as a csv file to connected computer, Disable the log, send the log to the configured user immediately. Active Individual Meter Alarm Log SEM3TM Note At one time, user can configure a maximum of 8 alarm logs. The alarm event log name has to be unique. System Event Log The user can navigate to the System Event Logging page by hovering or clicking the mouse on the "Logging" navigation link. Navigating to the System Event Logging Page SEM3TM - Embedded Micro Metering ModuleTM User Manual 75 Logging (cont'd.) A drop down menu will appear which will show "System Event Log" as a selection. Clicking on this selection will show the relevant webpage. System Event Log Page The system event log page provides the following: Event Log Parameters (recorded on change) a. The page allows user to view events captured for various configuration. User will able to Clear the recorded data, Download the recorded data to a machine/laptop in csv format, print the recorded data. The latest recorded event is highlighted in yellow. IP Address b. The page shows the navigation bar in the top of the page. Voltage Mode c. The logout link identified by a Logout text on the top right corner. Potential Transformer Primary d. There is a help link identified by a question mark (?) on the left of the Logout text. Subnet Mask Default Gateway Modbus Address Baud Rate Parity Line to Line/Neutral voltage Firmware upgrade Controller power up Installation configuration selection e. The drop down menu for different translated languages is provided. Offline configuration import The system event log file is stored under the EventLog directory in the SD card. Meter module specific events such as CT ratio, Accumulate Energy Enable Utility Seal enable/disable Meter module configuration change from single/dual/three phase to other phases Incorrect phase and incorrect CT polarity acknowledgement The system event log page displays 1000 events and the event recording rollovers to overwrite the oldest record. The highlighted line allows the distinction to show the latest recorded event. 76 All global reset events Meter module kWh reset event Event Log Parameters SEM3TM - Embedded Micro Metering ModuleTM User Manual Dashboard The SEM3 Phase 2 feature pages where the user can viewing historical trending of various parameters. These parameters and graphs are available under the Meter dashboard and Group dashboards. The meter dashboard shows the relevant information for individual meters and the group dashboard shows the information for grouped meters. Navigating to the Meter Dashboard Page Meter Dashboard The user can navigate to the Meter Dashboard page by hovering or clicking the mouse on the "Dashboard" navigation link. A drop down menu will appear which will show "Meter Dashboard" as a selection. Clicking on this selection will show the relevant webpage. Meter Dashboard Page SEM3TM - Embedded Micro Metering ModuleTM User Manual 77 Dashboard (cont'd.) The meter dashboard page provides the following: a. The page allows user to view the trending of various data points for individual meters. User will be able to configure maximum 4 data points to be displayed in trending graphs. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. The user can select individual meters from the "All meters" drop down menu. The graph type allows the user to pick between Today, Yesterday, Day to Day, Week to Week, Month to Month and Year to Year comparison. After the user selects the data points by clicking the appropriate check boxes for the data points, the graphs can be plotted by clicking on "Plot Graph". The user can also clear the past data by clicking on "Clear Data" button. Trending Data for Today By default no data points are selected. The All meters drop down menu shows the meter selection corresponding to the closest to meter 1. The Graph type menu shows Today as the selection. If the user selects Graph type as Today, selects a parameter and clicks on Plot Graph, the corresponding data is graphed from 12.00 am till the current time at every 15 minute interval. If the user selects Graph type as Yesterday, selects a parameter and clicks on Plot Graph, the corresponding data is graphed from 12.00 am to 11.59 pm of the previous day at every 15 minute interval. Trending Data for Yesterday 78 SEM3TM - Embedded Micro Metering ModuleTM User Manual Dashboard (cont'd.) The trending data parameters available for meter dashboard for various Graph types selection are shown in the table to the right. If the user selects Day to Day/Week to Week/Month to Month/Year to Year as Graph type, data point selection changes to kilowatt Hours. For the day to day selection, on selection of kWh, a bar chart comparison is shown for the last 7 days including the today. For the week to week selection, on selection of kWh, a bar chart comparison is shown for last 4 weeks including the current week. For the month to month selection, on selection of kWh, a bar chart comparison is shown for the last 6 months including the current month. For the year to year selection, on selection of kWh, a bar chart comparison is shown for last 3 years including the current year. Trending data parameters Today Yesterday Volts X X Current X X Kilowatts X X Kilo-VAs X X Kilo-VARs X X Kilowatt Hours X X Present Kilowatt Demand X X Maximum Kilowatt Demand X X Day to Day Week to Week Month to Month Year to Year X X X X Trending Data Parameters for Meter Dashboard for Various Graph Types If the user does not select any data points for display, the system responds with a message "Please select data points". If the user selects more than 4 data points for displaying the graphs, the system responds with a message "You have selected more than 4 Data points". Group Dashboard The user can navigate to the Group Dashboard page by hovering or clicking the mouse on the "Dashboard" navigation link. Navigating to Group Dashboard Page SEM3TM - Embedded Micro Metering ModuleTM User Manual 79 Dashboard (cont'd.) A drop down menu will appear which will show "Group Dashboard" as a selection. Clicking on this selection will show the relevant webpage. The group dashboard page provides the following: a. The page allows user to view the trending of various data points for grouped meters. b. The page shows the navigation bar in the top of the page. Group Dashboard Page c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. The user can select a single or multiple grouped meters from the "All meters Groups" drop down menu. If no groups have been created, the group listing is empty. User can choose a maximum of 4 groups to display the trending data on the same graph. The graph type allows the user to pick between Today, Yesterday, Day to Day, Week to Week, Month to Month and Year to Year comparison. After the user selects the data points, the graphs can be plotted by clicking on "Plot Graph". The user can also clear the past data by clicking on "Clear Data" button. The trending data parameters available for group dashboard for different graph type selections are shown in the table to the right. The display of graphs and error messages are similar to the response seen in meter dashboard. Trending data parameters Today Yesterday Day to Day Week to Week Month to Month Year to Year Kilowatts X X Kilowatt Hours X X X X X X Maximum Kilowatt Demand X X X X X X Trending Data Parameters for Group Dashboard for Various Graph Types 80 SEM3TM - Embedded Micro Metering ModuleTM User Manual User Configuration User Profile The user can navigate to the User Profile page by hovering or clicking the mouse on the "User Configuration" navigation link. Navigation to the User Profile Page A drop down menu will appear which will show "User Profile" as a selection. Clicking on this selection will show the relevant webpage. The user profile page provides the following: a. The page allows user to enter information relevant to the connected current user. User will able to update the password. The user can save the latest information by clicking on Save button. b. The page shows the navigation bar in the top of the page. User Profile Page c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. The table to the right shows the parameters which are to be entered in the User profile page. User Profile parameters Values User ID Not configurable First Name User first name, Mandatory field Last Name User last name, Mandatory field Company Name User Company name Email User email address, Mandatory field Phone User phone number Access Level User Access level, Not configurable Modify Password Checkbox to allow user to modify password Existing Password User Existing Password, Mandatory field New Password User New Password, Mandatory field Confirm Password User New Password confirmation, Mandatory field User Profile Parameters SEM3TM - Embedded Micro Metering ModuleTM User Manual 81 User Configuration (cont'd.) If the user does not enter the mandatory fields and tries to save the information, the system provides a response message showing the missing fields. Also if the user decides to modify the password and does not enter valid passwords, the System responds with a message "Passwords fields cannot be blank". After all the relevant fields entered by the user, the user can save the information by clicking on Save button. The system responds with a message "User profile has been saved". Response Message for Missing Required Information The user profile can be configured with correct email credentials for the SEM3 controller to send the email correctly to a connected SMTP server. In case, a XAMPP Mercury email client is used for email purposes, the user profile on the SEM3 controller has to be configured with the email address specified as <user>@ localhost.com; where <user> is the user account configured in Mozilla Thunderbird during the SMTP server-client setup as defined in section 4.10. User Management The user can navigate to the User Management page by hovering or clicking the mouse on the "User Configuration" navigation link. Navigation to User Management Page A drop down menu will appear which will show "User Management" as a selection. Clicking on this selection will show the relevant webpage. User Management Page 82 SEM3TM - Embedded Micro Metering ModuleTM User Manual User Configuration (cont'd.) The user management page provides the following: a. The page allows user to enter information relevant to all users. User will able to update the password. The user can save the latest information by clicking on Save button. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. Only the supervisor user can access this webpage. The supervisor user cannot delete its own account listing. The supervisor user cannot change its own user id. The supervisor user can add new user accounts by clicking on Add User button. When the Add user button is clicked, an expanded user details block is shown. In this block the Supervisor user can enter some relevant information for a new user. The following are the user fields available for update in the user management webpage. After all the relevant information has been entered, the Supervisor user can save a user informat A total of 4 users can be created at a time. If the Supervisor attempts to create more than 4 users, the system responds with an error message "Maximum users already created, please delete some user(s) and try again. The supervisor can delete a user different than itself. The user profile can be configured with correct email credentials for the SEM3 controller to send the email correctly to a connected SMTP server. In case a XAMPP Mercury email client is used for email purposes, the user profile on the SEM3 controller has to be configured with the email address specified as <user>@ localhost.com; where <user> is the user account configured in Mozilla Thunderbird during the SMTP server-client setup as defined in section 4.10. Add User Fields User Management Add user parameters Values User ID New User id, Mandatory field Minimum of 4 characters and not exceeding 10 characters First Name New User first name, Mandatory field Last Name User last name, Mandatory field Company Name User Company name Email User email address, Mandatory field Phone User phone number Access Level User Access level, Configurable - Observer - Controller - Supervisor Default: Observer Password New User Password, Mandatory field Confirm Password New User Password confirmation, Mandatory field User Management Add User Parameters SEM3TM Note At one time, user can configure a maximum of 4 users including the admin account. SEM3TM - Embedded Micro Metering ModuleTM User Manual 83 Tools Diagnostics The user can navigate to the Diagnostics page by hovering or clicking the mouse on the "Tools" navigation link. Navigation to Diagnostics Page A drop down menu will appear which will show "Diagnostics" as a selection. Clicking on this selection will show the relevant webpage. The diagnostics page provides the following: a. The user can download the Full Modbus map and also the mini monitor Modbus map. By clicking on individual meter, the user can view the Modbus map of individual meter module. b. The page allows user to view the CT or phase angle misalignment of the configured meter modules. The user can acknowledge the incorrect installment of the CTs or meter module phase selection. c. Also the user can upload the latest firmware/webpages and reset the controller. d. The page shows the navigation bar in the top of the page. e. The logout link identified by a Logout text on the top right corner. Diagnostics Page f. There is a help link identified by a question mark (?) on the left of the Logout text. g. The drop down menu for different translated languages is provided. By default, the CT polarity acknowledgement option is available. 84 SEM3TM - Embedded Micro Metering ModuleTM User Manual Tools (cont'd.) Modbus Map The user can download the complete Modbus map of registers from the SEM3 controller by clicking on "Download full register map" button. Also the user can download the mini monitor register map by clicking on "Download mini register map" button. Both of these activities result in csv file being downloaded to the connected computer/machine. Additionally for individual meter module, the user can click on a grid of a meter module and view the expanded view of the Modbus registers for the corresponding meter module. The display also shows the Meter module diagnostic Modbus registers (Delta temperature from 22C, Serial number and Firmware versions). Meter Module Expanded Information Acknowledgement of Incorrect Installation The diagnostics page also allows the user to view the incorrect CT polarity or incorrect CT phase angle indications. The legend at the bottom of the grid shows the colors associated with the incorrect indications. The user can also clear the incorrect CT polarity or incorrect CT phase angle indications. The clearing is performed by selecting either the CT Phase angle or the CT polarity radio button. Selecting either of these changes the user action button to either Clear CT Phase angle indication or Clear CT polarity Indication. By default, the CT Polarity button is selected. If the user wants to clear the CT polarity for an individual meter, the user needs to select the corresponding meter and click on the "Clear CT polarity indication" button. The system responds with a message "Cleared CT Polarity Indication". The webpage refreshes and the indication for the concerned meter is no longer present for the current power cycle of the controller. If the user wants to clear the CT phase angle for an individual meter, the user needs to select the radio button for the CT Phase angle. The user can select corresponding meter and click on the "Clear CT phase angle indication" button. The system responds with a message "Cleared Phase angle Indication". The webpage undergoes an automatic refresh and the indication for the concerned meter is no longer present for the current power cycle of the controller. The user can also select multiple meters by selecting the corresponding check boxes. The user can also select all the meters in a particular column by selecting the check box "Select All". Once the meters have been appropriately selected, the user can click on the Clear operation button to clear the respective indications. SEM3TM - Embedded Micro Metering ModuleTM User Manual 85 Tools (cont'd.) Firmware Upgrade The diagnostic page allows user to upgrade the firmware of the controller. The user can select a firmware application binary file and a corresponding check file (used for decryption in the controller) to upgrade the firmware of the controller. If the user fails to select any file and clicks upload file, the system responds with a message "Invalid file selection to upload". Response Message for Upload Selection with No Valid Firmware Files The user can click on the "Select File" button to select the correct files. A new window opens up which shows an windows explorer window for the user to browse and select files for upgrade. If the user selects non binary and check file, the system responds with error message "Please select .bin or .chk file". Selection of Firmware Files 86 SEM3TM - Embedded Micro Metering ModuleTM User Manual Tools (cont'd.) Once the correct files have been selected, the user can click on "Open" button on the windows explorer file to complete the selection the files. Completion of Selection of Files After the selection is complete the user can click on "Upload File" button to upload the selected files. During the upload process, the percentage uploaded shows a increasing values of percentage. After the upload is complete, the message asks the user to click on "Reset Controller" button to complete the firmware upgrade process. When the user clicks on the "Reset Controller" button, the system responds with a message "The controller will restart in 2 minutes. Please stand by." The system reboots and after upgrading the firmware, the login page reappears. Completion of Upload Files Webpage Upgrade The diagnostics page also gives user an option to upgrade the controller webpages. Firmware and Webpage Upgrade Options SEM3TM - Embedded Micro Metering ModuleTM User Manual 87 Tools (cont'd.) Meter Module Serial Numbers The user can navigate to the Meter Module Serial Number page by hovering or clicking the mouse on the "Tools" navigation link. Navigation to Meter Module Serial Number Page A drop down menu will appear which will show "Meter Module Serial Numbers" as a selection. Clicking on this selection will show the relevant webpage. The meter module serial number page provides the following: a. A screen that displays available meter modules (configured or otherwise) with the labels/meter names, Module Ids and serial numbers of the meter modules. A color coded visual display of the multiphase configuration of the configured meter modules is provided. Meter Module Serial Number Page b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. 88 SEM3TM - Embedded Micro Metering ModuleTM User Manual Import Configuration The user can navigate to the Import configuration page by clicking on the "Import Configuration" navigation link. Navigating to the Import Configuration Page The import configuration page provides the following: a. A page that allows user to select a specific offline created configuration file to be uploaded to the connected SEM3 controller. The user can select one of many such offline configured files uploaded to the SEM3 controller to be imported for configuration purposes. The user can also delete previously uploaded configuration files. Import Configuration Page b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. SEM3TM - Embedded Micro Metering ModuleTM User Manual 89 Import Configuration (cont'd.) By default, no files are selected as configuration files. The availability of the configuration files in the SEM3 controller allows the user to revert back to a previously configured base configuration. This is particularly useful if there are several configuration changes made and the user wants to fall back on a known configuration. The selection of file is dependent of several conditions. a. Only a Java Script Object Notation (json) extension file can be uploaded to the connected SEM3 controller. Non-json file extensions when uploaded will result in an error message from the system as "Please select .json file". Correct Selection of Offline Configured File b. The json file can only have a maximum of 30 characters. If a json file with file name exceeding 30 characters is selected, the system will result in an error message as "File name should not be exceed 30 charactors". c. The selected json file cannot contain spaces. If the selected file has these characters, the system will result in an error message as "Selected file contains space, please remove space from file name and retry". If a correct file is selected for upload to the SEM3 controller, a new button called "Upload file" appears allowing user to upload the selected file. The user can upload the selected file by clicking on the Upload file button. After successful upload the file is removed from the file name listing and the user gets a successful file upload message "Uploads complete". Successful Upload of Offline Configured File 90 SEM3TM - Embedded Micro Metering ModuleTM User Manual Import Configuration (cont'd.) The successfully uploaded file now appears under the drop down menu for import configuration. Import Offline Configured File After the user selects one of the many uploaded offline configuration file, the concerned file can be deleted by clicking on the Delete button. After the deletion of the configuration file, the system responds with a message "Configuration file deleted successfully." The user can import the configuration from an uploaded offline configuration file, by selecting the file and clicking on "Import configuration" button. This will force the system to replace the existing configuration, data logs and the controller will be reset. The user has to acknowledge this operation by clicking "Yes" on the ensuing dialog window. If the user does not want to replace existing configuration, clicking on "No" will stop the import process. At this time, the user can decide to delete the uploaded files or retain them for future references. Confirmation for User to Import Configuration If the user decides to proceed with the import operation, the system will replace the existing configuration and data files and provide a confirmation message "All settings applied successfully and system will be restarted in 2 minutes..." After the system reboots, the login page is automatically displayed. At this time the user can login with previously configured credentials or default credentials and login to the system. Successful Import of Configuration SEM3TM - Embedded Micro Metering ModuleTM User Manual 91 Export Configuration The export configuration page provides the following: a. A page that allows user to export the configuration file as a json file from the connected SEM3 controller. The configuration file is downloaded to the Downloads folder of the user laptop as a file name "export.json". b. The page shows the navigation bar in the top of the page. Export Configuration Page c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided underneath the logout text. When the user clicks the "Export" button, the current configuration of the connected SEM3 controller is downloaded to the machine/laptop user downloads folder as "export.json" file. The user can navigate to the "Downloads" folder to view, save or delete the concerned configuration file. 92 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol BACnet The SEM3 Phase 2 Feature set includes implementation for BACnet IP and BACnet MS/TP. The following table provides a summary of the product listing information referenced in the BACnet Testing Lab product listing document in the Reference document section. BACnet parameters Values BACnet protocol Revision Revision 14 BACnet software version 1.4 Vendor Id 313 BACnet Standardized Device Profile BACnet Smart Sensor (B-SS) BACnet Interoperability building blocks supported Data Sharing: ReadProperty - B (DS-RP-B) The following sections show the selections available for the implementation of the two protocols (BACnet IP and MS-TP). External third party BACnet explorer tools can be used to establish connection with the SEM3 controller. One such tool is the CAS BACnet explorer, the section 4.12, shows the method to connect to a connected BACnet device and explore the objects. Data Sharing: WriteProperty - B (DS-WP-B) Alarm and Event Notification Internal - B (AEN-I-B) Alarm and Event Notification Acknowledgement - B (AE-ACK-B) Alarm and Event Notification Information - B (AE-INFO-B) Device and Network Management: Dynamic Device Binding - A (DM-DDB-A) Device and Network Management: Dynamic Device Binding - B (DM-DDB-B) Device and Network Management: Dynamic Object Binding - B (DM-DOB-B) Object Type Supported Analog Input, Binary Input, Device and Notification Class Data Link Layer Options MS-TP Master (9600, 38400) BACnet IP (Annex J) - Register as Foreign Device Character Set Support ISO 10646 (UTF - 8) BACnet Parameters for SEM3 BACnet IP The BACnet application is not active in the SEM3 controller by default. In order for the BACnet IP protocol to be active, the user has to change the protocol appropriately in the system settings page. The user needs to navigate to the System settings page under the Settings link on the navigation bar. In the System settings page, the user has to locate the "Installation Configuration Selection" section. Using the drop down menu, the user has to select, "BMS Configuration - BACnet IP". Change Protocol to BACnet IP SEM3TM - Embedded Micro Metering ModuleTM User Manual 93 Communications Protocol (cont'd.) Once the selection is made, the user needs to click on "Change Protocol" button. Once the selection is made, the system sends a message "Protocol change successfully, System will be restarted in 2 minutes..". After the system reboots, the login page reappears. The user needs to login again and the new BACnet IP enabled system is functional. The navigation tab is reconfigured to match the correct implementation with BACnet protocol. Navigation Link with BACnet IP BACnet Settings The user can navigate to the BACnet Settings page by hovering or clicking the mouse on the "BACnet" navigation link. Navigating to BACnet Settings Page (BACnet IP) 94 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) A drop down menu will appear which will show "BACnet Settings" as a selection. Clicking on this selection will show the relevant webpage. BACnet Settings Page (BACnet IP) The BACnet Settings page provides the following: a. The page allows user to configure several BACnet IP settings parameters. The user can save the changed parameters. The user can download BACnet object map. BACnet Settings Parameters Values Device Object Instance ID Configure the unique Device object Instance ID. This will be the identifier of the device in a network. Range 0 - 4194302 Default: 1 Port b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. Range 47808 - 47823 and 49152 - 65535 Default: 47808 Recipient List Number d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. The following parameters are configurable in the BACnet IP settings page. Configure the device port. Configure the parameters for a specific recipient list identified by a number. Recipient is a external entity BACnet device which is in the same network as SEM3 and is expecting notifications from SEM3. Currently maximum 5 Recipients can be configured. Recipient List Configure a recipient either as Device Id or Address Recipient List configured as Device Id Parameters Values Object type Not configurable, Default: Device Instance Configure the Recipient device object instance ID. Range 0 - 4194302 Default: 456 ID Not configurable, Default: Device, <Instance Id value> Process Identifier Configure the handle of a process within the recipient device that is to receive the event notification. Range 0 - 65535 SEM3TM - Embedded Micro Metering ModuleTM User Manual 95 Communications Protocol (cont'd.) BACnet Settings Parameters Values Recipient List configured as Address Parameters Values Network Number Configure the recipient device network number. Range 0 - 65535 IP Address Configure the recipient device IP address. Port Number Configure the recipient device port. Range 47808 - 47823 and 49152 - 65535 Default: 47808 Process Identifier The user can configure BACnet device object instance ID and port to uniquely identify the SEM3 device in the network. At present time, the user can configure a maximum of 5 recipients to receive notifications from the SEM3 device. The recipient can be configured using a device id or an address. Once the user selects either device id or address as the method, there are other parameters which need to be configured as detailed in the table `BACnet IP Settings Parameters'. 96 Configure the handle of a process within the recipient device that is to receive the event notification. Range 0 - 65535 Valid Days and Time Configure which days (Sunday - Saturday) and between what time will the device notifications be available for the specific recipient. If any alarm events are triggered between "From Time" and "To Time" for selected days, the respective recipient will be notified with EventNotification property. BACnet IP Settings Parameters Downloaded BACnet Object Data map parameters Values Meter Id Number of the meter. Range 1 - 45 The user can save the changes by clicking on "Save" button. In case where the user updates the Device object Instance ID and Port and saves the system will reboot to save the new parameters. This causes the system to respond with a message "BACnet settings saved successfully, system will be restarted in 2 minutes." The system reboots and the user needs to re-login into the system. After navigating to the BACnet settings page, the user can verify that the settings are saved. Phase Configured phase of the meter number Single, Two or Three phase Default: Single phase Mapped AI Datapoint 0 Mapped Analog Input Datapoint 0 AI_ID0 Analog Input ID 0 numbered reference Mapped AI Datapoint 1 Mapped Analog Input Datapoint 1 AI_ID1 Analog Input ID 1 numbered reference Mapped AI Datapoint 2 Mapped Analog Input Datapoint 2 AI_ID2 Analog Input ID numbered reference Mapped AI Datapoint 3 Mapped Analog Input Datapoint 3 AI_ID3 Analog Input ID 3 numbered reference For changes on the recipient list column, there is no system reboot. The system only responds with message "BACnet Settings saved successfully". While making changes, the user can revert back to the last saved settings by simply clicking on the "Cancel" button. This replaces the last saved settings information. Mapped AI Datapoint 4 Mapped Analog Input Datapoint 4 AI_ID4 Analog Input ID 4 numbered reference Mapped BI Datapoint 0 Mapped Binary Input Datapoint 0 BI_ID0 Binary Input ID 0 numbered reference Mapped BI Datapoint 1 Mapped Binary Input Datapoint 1 BI_ID1 Binary Input ID 1 numbered reference Mapped BI Datapoint 2 Mapped Binary Input Datapoint 2 The user can also download the currently configured BACnet object data map. The data map can be downloaded as a csv format file which shows the following parameters. BI_ID2 Binary Input ID 2 numbered reference Mapped BI Datapoint 3 Mapped Binary Input Datapoint 3 BI_ID3 Binary Input ID 3 numbered reference Downloaded BACnet Object Data Map SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) The first 45 meters are supported (Meter Id 1 - 45). The values of the selected data points will be shown as zero (0) if the respective meter is not connected and configured. The csv file shows the mapping of the analog parameter denoted by name under the Mapped AI Datapoint n, where n ranges from 0 - 4, to an analog input node ID number reference. The csv file also shows the mapping of the binary parameter denoted by name under the Mapped BI Datapoint m, where m ranges from 0 - 3 to a binary input node ID number reference. Binary Data point Binary Object Name Binary Object ID Global Under Voltage Alarm BI-181 180 Global Over Voltage Alarm BI-182 181 Fixed Global Alarm Binary Data Points For example if Mapped AI Datapoint 0 is Volts and AI_ID0 is 0 correspond to the Meter Id 1, then Meter Id 1 volts are displayed as values under the node analog input 0. The meters for which the BACnet object mappings are not configured continue to show-up in the object map csv file, with the default configuration values. The only exception is that the phase information is removed for these meters, when the user saves the configuration for other meters. If the user configures all the meters for the object mapping, then the csv file will reflect the correct configuration information for all the meters. In addition to these data points, there are 2 fixed global binary data points mapped which are also not configurable. BACnet IP Data Logs The user can navigate to the BACnet Data Logs page by hovering or clicking the mouse on the "BACnet" navigation link. Navigating to the BACnet Data Logs Page (BACnet IP) SEM3TM - Embedded Micro Metering ModuleTM User Manual 97 Communications Protocol (cont'd.) A drop down menu will appear which will show "BACnet Data Logs" as a selection. Clicking on this selection will show the relevant webpage. BACnet Data Logs Page (BACnet IP) The BACnet Data Logs page provides the following: a. The page allows user to configure Data points as BACnet objects. The user can save the configured data points. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. By default, the pole selection is One Pole. The active meters as part of One Pole are shown in the active meter column. The "Data to be logged in" shows the binary data points. The binary data points are fixed to 4 data points, which are listed in the table "Default BACnet Data Points". There are 5 default analog data points which are listed in the table "Default BACnet Data Points" which can be configurable to other analog data points listed in the table "BACnet Configurable Data Points". When the user selects a particular meter from the Active meter, the default selected analog data points are shown under the "Data to be logged in" column as shown in the image, "Selecting of Analog Data Points." 98 Data point type Single Phase Two Phase Three Phase Analog Volts Volts Phase 1 Volts Phase 1 Volts Phase 2 Volts Phase 2 Volts Phase 3 Analog Current Current Phase 1 Current Phase 1 Current Phase 2 Current Phase 2 Current Phase 3 Analog Kilowatts Kilowatts Phase 1 Kilowatts Phase 1 Kilowatts Phase 2 Kilowatts Phase 2 Kilowatts Phase 3 Analog Kilo-VAs Kilo-VAs Phase 1 Kilo-VAs Phase 1 Kilo-VAs Phase 2 Kilo-VAs Phase 2 Kilo-VAs Phase 3 Analog Kilo-VARs Kilo-VARs Phase 1 Kilo-VARs Phase 1 Kilo-VARs Phase 2 Kilo-VARs Phase 2 Kilo-VARs Phase 3 Binary Over KW Demand Alarm Over KW Demand Alarm Over KW Demand Alarm Binary Phase Over Current Alarm Phase Over Current Alarm Phase Over Current Alarm Binary Phase Over Current Pre-Alarm (Warning) Phase Over Current Pre-Alarm (Warning) Phase Over Current Pre-Alarm (Warning) Binary Phase Loss (0 amps) Alarm Phase Loss (0 amps) Alarm Phase Loss (0 amps) Alarm Default BACnet Data Points SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) The following table shows the configurable analog data points available for the user. Single Phase Two Phase Three Phase Volts Volts Phase 1 Volts Phase 1 Volts Phase 2 Volts Phase 2 Volts Phase 3 Current Current Phase 1 Current Phase 1 Current Phase 2 Current Phase 2 Current Phase 3 Kilowatts Kilowatts Phase 1 Kilowatts Phase 1 Kilowatts Phase 2 Kilowatts Phase 2 Kilowatts Phase 3 Kilo-VAs Kilo-VAs Phase 1 Kilo-VAs Phase 1 Kilo-VAs Phase 2 Kilo-VAs Phase 2 Kilo-VAs Phase 3 Kilo-VARs Kilo-VARs Phase 1 Kilo-VARs Phase 1 Kilo-VARs Phase 2 Kilo-VARs Phase 2 Kilo-VARs Phase 3 Power Factor Power Factor Phase 1 Power Factor Phase 1 Power Factor Phase 2 Power Factor Phase 2 Power Factor Phase 3 Phase Angle Phase Angle Phase 1 Phase Angle Phase 1 Phase Angle Phase 2 Phase Angle Phase 2 Phase Angle Phase 3 KiloWatt Hours KiloWatt Hours KiloWatt Hours KiloVA Hours KiloVA Hours KiloVA Hours KiloVAR Hours KiloVAR Hours KiloVAR Hours Line Frequency Line Frequency Phase 1 Line Frequency Phase 1 Line Frequency Phase 2 Line Frequency Phase 2 Line Frequency Phase 3 Present Current Demand Present Current Demand Phase 1 Present Current Demand Phase 1 Present Current Demand Phase 2 Present Current Demand Phase 2 Present Current Demand Phase 3 Maximum Current Demand Maximum Current Demand Phase 1 Maximum Current Demand Phase 1 Maximum Current Demand Phase 2 Maximum Current Demand Phase 2 Maximum Current Demand Phase 3 Maximum Current Maximum Current Phase 1 Maximum Current Phase 1 Maximum Current Phase 2 Maximum Current Phase 2 Maximum Current Phase 3 Present Kilowatt Demand Present Kilowatt Total Demand Present Kilowatt Total Demand Average Kilowatts Demand Average Kilowatts Total Demand Average Kilowatts Total Demand Maximum Kilowatts Demand Maximum Kilowatts Total Demand Maximum Kilowatts Total Demand Continued on next page SEM3TM - Embedded Micro Metering ModuleTM User Manual 99 Communications Protocol (cont'd.) Single Phase Two Phase Three Phase Maximum Total Kilowatts Maximum Total Kilowatts Maximum Total Kilowatts Total Monitor Kilowatts Total Monitor Kilowatts Total Monitor Power Factor Total Monitor Power Factor Average Current of 2 Phases Average Current of 3 Phases Average Volts Average Volts Total Monitor Current Total Monitor Current Total Monitor Kilo-VARs Total Monitor Kilo-VARs Total Monitor Kilo-VAs Total Monitor Kilo-VAs Average Volts BACnet Configurable Data Points Selecting Data Points as BACnet Objects The user is allowed to pick the analog elements which will be configured as BACnet objects. The user starts with selecting the corresponding Pole selection (One, Two or Three) to show the available active meters for that particular pole selection. Once the active meter list is populated, the user can select individual meter or multiple meters and drag and drop the required Analog Data points from the available "Analog Data points" Column to the "Data to be logged in" column. The analog and binary data points are color coded to show the difference. Once the user has made the selections for different pole selections, the user needs to click on "Save" button to save the selection. The system responds with message "Log saved successfully". Selecting of Analog Data Points The user is able to select only 5 analog elements to be saved as BACnet objects. If additional elements are selected to be configured as BACnet objects, the system responds with a message "Maximum 5 Analog Data Points are allowed". If the user does not select any meters from the Active meter list and attempts to click save, the system responds with a message "Invalid entry" and highlights the Active meter column as an area where the user has to make selection. Incorrect Selection of Active Meters 100 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) BACnet Foreign Device Register The SEM3 system also supports a feature called Foreign Device Registration (FDR). This feature allows the SEM3 device to send its broadcast message to a BACnet IP Broadcast Management Device (BBMD). The BBMD will send any received broadcast messages to all other BBMDs in the network or other devices registered as under FDR. The user can navigate to the BACnet Foreign Device Register page by hovering or clicking the mouse on the "BACnet" navigation link. A drop down menu will appear which will show "BACnet Foreign Device Register" as a selection. Clicking on this selection will show the relevant webpage. The BACnet Foreign Device Register page provides the following: Navigating to BACnet Foreign Device Register Page a. The page allows user to configure SEM3 as BACnet Foreign Device. The user can save the registration information. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. By default, registration information is displayed. This displays the present status of the registration. If the device has not been previously configured, the registration status shows "Not Registered". The other parameters are greyed out. If the user intends to register the SEM3 as a foreign device, the check box next to "Enable Foreign Registration" needs to be checked. This will enable the user to enter the information for the relevant parameters as shown in the table to the right. After the user clicks on the "Register" button, the system responds with a message "Foreign Device Enabled Successfully. System will be restarted in 2 minutes." The system reboots and the user has to re-login to the system. BACnet Foreign Device Register Page BACnet Foreign Device Registration Parameters Values BBMD IP address BACnet/IP Broadcast Management Device (BBMD) IP address: IP address of Internet gateway device for network where BBMD resides. This value is not the internal network address of BBMD unless device is directly visible from network where SEM3 is connected. BBMD Port BBMD Port address Range 47808 - 47823 and 49152 - 65535 Time-To-Live Time period in seconds within which a foreign device must re-register with a BBMD. Range 0 - 65535. BACnet Foreign Device Registration Parameters SEM3TM - Embedded Micro Metering ModuleTM User Manual 101 Communications Protocol (cont'd.) BACnet MS-TP In SEM3 system implementation, the master node functionality of the BACnet MS-TP protocol is implemented in SEM3 device. The physical layer supported is through EIA-485 interface. In order for the BACnet Master Slave - Token Passing (MS-TP) protocol to be active, the user has to change the protocol appropriately in the system settings page. The user needs to navigate to the System settings page under the Settings link on the navigation bar. In the System settings page, the user has to locate the "Installation Configuration Selection" section. Using the drop down menu, the user has to select, "BMS Configuration - BACnet MSTP". Once the selection is made, the user needs to click on "Change Protocol" button. Once the selection is made, the system sends a message "Protocol change successfully, System will be restarted in 2 minutes.." After the system reboots, the login page reappears. Change Protocol to BACnet MSTP The user needs to login again and the new BACnet MSTP enabled system is functional. The navigation tab is reconfigured to match the correct implementation with BACnet protocol. BACnet MS-TP Settings The user can navigate to the BACnet Settings page by hovering or clicking the mouse on the "BACnet" navigation link. Navigating to BACnet Settings Page (BACnet MS-TP) 102 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) A drop down menu will appear which will show "BACnet Settings" as a selection. Clicking on this selection will show the relevant webpage. BACnet Settings Page (BACnet MS-TP) The BACnet Settings page provides the following: a. The page allows user to configure several BACnet MS-TP settings parameters. The user can save the changed parameters. The user can download BACnet object map. b. The page shows the navigation bar in the top of the page. c. The logout link identified by a Logout text on the top right corner. d. There is a help link identified by a question mark (?) on the left of the Logout text. e. The drop down menu for different translated languages is provided. The following parameters are configurable in the BACnet MS-TP settings page. BACnet Settings Parameters Values Device Object Instance ID Configure the unique Device object Instance ID. This will be the identifier of the device in a network. Range 0 - 4194302 Default: 1 MAX Masters Configure the maximum master devices in the MS-TP network. Range 0 - 127 Default: 127 Baud Rate Configure the MS-TP applicable baud rate. 9600, 38400 Default: 38400 MAC Address Configure node number of the device. Range 0 - 127 Default: 5 Parity Not configurable. Default: None Stop Bits Not configurable. Default: 1 Recipient List Number Configure the parameters for a specific recipient list identified by a number. Recipient is an external entity BACnet device which is in the same network as SEM3 and is expecting notifications from SEM3. Currently maximum 5 Recipients can be configured. Recipient List Configure a recipient either as Device Id or Address Continued on next page SEM3TM - Embedded Micro Metering ModuleTM User Manual 103 Communications Protocol (cont'd.) The user can configure BACnet device object instance ID, MAX Masters, Baud Rate, MAC address to uniquely identify the SEM3 device in the network. At present time, the user can configure a maximum of 5 recipients to receive notifications from the SEM3 device. The recipient can be configured using a device id or an address. Once the user selects either device id or address as the method, there are other parameters which need to be configured as detailed by the table "BACnet MS-TP Settings Parameters". The user can save the changes by clicking on "Save" button. In case where the user updates the Device object Instance ID, MAX Masters, Baud Rate and MAC Address and saves the system will reboot to save the new parameters. This causes the system to respond with a message "BACnet settings saved successfully, system will be restarted in 2 minutes." The system reboots and the user needs to re-login into the system. After navigating to the BACnet settings page, the user can verify that the settings are saved. BACnet Settings Parameters Recipient List configured as Device Id Values Parameters Values Object type Not configurable, Default: Device Instance Configure the Recipient device object instance ID. Range 0 - 4194302 Default: 456 ID Not configurable, Default: Device, <Instance Id value> Process Identifier Configure the handle of a process within the recipient device that is to receive the event notification. Range 0 - 65535 Recipient List configured as Address Parameters Values Network Number Configure the recipient device network number. Range 0 - 65535 In BACnet MS-TP, if device and recipient device are in the same MS-TP network, then the network number will be 0 and if they are in different network then the network number will be BACnet router's MS-TP network number. For changes on the recipient list column, there is no system reboot. The system only responds with message "BACnet Settings saved successfully". While making changes, the user can revert back to the last saved settings by simply clicking on the "Cancel" button. This replaces the last saved settings information. System Identifier Configure the identification of the recipient either as IP address or MAC address. In case of MAC address identification, the supported MAC address has a 3 digits limit. System identifier as IP address Parameters Values IP Address Configure the IP address of the recipient Port Number Configure the port number of the recipient. Range 47808 - 47823 and 49152 - 65535 Process Identifier Configure the handle of a process within the recipient device that is to receive the event notification. The user can also download the currently configured BACnet object data map. The data map can be downloaded as a csv format file. Range 0 - 65535 System identifier as MAC address Parameters Values MAC Address Configure the MAC address of the recipient. Range 0 - 254 Process Identifier Configure the handle of a process within the recipient device that is to receive the event notification. Range 0 - 65535 Valid Days and Time Configure which days (Sunday - Saturday) and between what time will the device notifications be available for the specific recipient. If any alarm events are triggered between "From Time" and "To Time" for selected days, the respective recipient will be notified with EventNotification property. BACnet MS-TP Settings Parameters 104 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) BACnet MS-TP Data Logs The user can navigate to the BACnet Data Logs page by hovering or clicking the mouse on the "BACnet" navigation link. Navigating to BACnet Data Logs (BACnet MS-TP) A drop down menu will appear which will show "BACnet Data Logs" as a selection. Clicking on this selection will show the relevant webpage. The number of analog data points which can be selected for individual meter is 5. The binary data points are fixed for each meter. BACnet Data Logs Page (BACnet MS-TP) SEM3TM - Embedded Micro Metering ModuleTM User Manual 105 Communications Protocol (cont'd.) Modbus TCP / IP Connection Enhancement As a part of the SEM3 system, a user can request Modbus access through external tools such as Modbus Poll and establish maximum 4 connections to the SEM3 controller. The user does not have to make any configuration or changes in the webpages to activate this feature. This feature is available by default. Using Modbus Poll the user can establish connections to the SEM3 controller and read specific Modbus registers. Concurrent Modbus Connections to the SEM3 Controller 106 SEM3TM - Embedded Micro Metering ModuleTM User Manual Communications Protocol (cont'd.) System Time Setup and NTP Time Synchronization The SEM3 controller has features to enable the recording of system time. The system time can be stored from the user input through the System settings page. The system time will be stored every 15 minutes the controller is operational. So the last stored system date and time will be used when the controller powers up after a power cycle. The user can also use Network Time protocol (NTP) servers to establish connection with the SEM3 controller. The network time server information can be entered through the system settings page as well. The details are located in the System Time Setup section under System Settings section. SNMP Support The SEM3 controller is designed to respond as a Simple Network Management Protocol client version 2c. The client stack is designed using the software stack derived from DMH software Inc. When the Modbus Configuration - TCP/RTU is selected, the SNMP Agent or client is active. The SNMP client is not active when the Building Management system configurations are selected. The SEM3 controller webpages only allow the user to configure the IP address of the SNMP manager. There are no other configuration related access for the user. The SNMP manager configuration is stored from the user input through the System settings page. The details are located in the SNMP configuration section under the System Settings section. An Internet Assigned Numbers Authority (IANA) ID of 339 has been assigned to Siemens and has been used in the implementation of the SNMP protocol with the SEM3 controller. The following datapoints have been configured as ouput registers available for export through the SNMP protocol. Single Phase Two Phase Three Phase Volts Volts Phase 1 Volts Phase 1 Volts Phase 2 Volts Phase 2 Volts Phase 3 Current Current Phase 1 Current Phase 1 Current Phase 2 Current Phase 2 Current Phase 3 Kilowatts Kilowatts Phase 1 Kilowatts Phase 1 Kilowatts Phase 2 Kilowatts Phase 2 Kilowatts Phase 3 Kilo-VAs Kilo-VAs Phase 1 Kilo-VAs Phase 1 Kilo-VAs Phase 2 Kilo-VAs Phase 2 Kilo-VAs Phase 3 Kilo-VARs Kilo-VARs Phase 1 Kilo-VARs Phase 1 Kilo-VARs Phase 2 Kilo-VARs Phase 2 Kilo-VARs Phase 3 Power Factor Power Factor Phase 1 Power Factor Phase 1 Power Factor Phase 2 Power Factor Phase 2 Power Factor Phase 3 Phase Angle Phase Angle Phase 1 Phase Angle Phase 1 Phase Angle Phase 2 Phase Angle Phase 2 Phase Angle Phase 3 KiloWatt Hours KiloWatt Hours KiloWatt Hours KiloVA Hours KiloVA Hours KiloVA Hours KiloVAR Hours KiloVAR Hours KiloVAR Hours (continued on next page) SEM3TM - Embedded Micro Metering ModuleTM User Manual 107 Communications Protocol (cont'd.) Single Phase Two Phase Three Phase Line Frequency Line Frequency Phase 1 Line Frequency Phase 1 Line Frequency Phase 2 Line Frequency Phase 2 Line Frequency Phase 3 Present Current Demand Present Current Demand Phase 1 Present Current Demand Phase 1 Present Current Demand Phase 2 Present Current Demand Phase 2 Present Current Demand Phase 3 Maximum Current Demand Maximum Current Demand Phase 1 Maximum Current Demand Phase 1 Maximum Current Demand Phase 2 Maximum Current Demand Phase 2 Maximum Current Demand Phase 3 Maximum Current Maximum Current Phase 1 Maximum Current Phase 1 Maximum Current Phase 2 Maximum Current Phase 2 Maximum Current Phase 3 Present Kilowatt Demand Present Kilowatt Total Demand Present Kilowatt Total Demand Average Kilowatts Demand Average Kilowatts Total Demand Average Kilowatts Total Demand Maximum Kilowatts Demand Maximum Kilowatts Total Demand Maximum Kilowatts Total Demand Maximum Total Kilowatts Maximum Total Kilowatts Maximum Total Kilowatts Total Monitor Kilowatts Total Monitor Kilowatts Total Monitor Power Factor Total Monitor Power Factor Average Current of 2 Phases Average Current of 3 Phases Average Volts Average Volts Total Monitor Current Total Monitor Current Total Monitor Kilo-VARs Total Monitor Kilo-VARs Total Monitor Kilo-VAs Total Monitor Kilo-VAs Average Volts SNMP Agent Data Points The SNMP Agent or client is also able to generate traps for following alarms. Single Phase Two Phase Three Phase Over kW Demand Alarm Over kW Demand Alarm Over kW Demand Alarm Phase over current alarm Phase 1 over current alarm Phase 1 over current alarm Phase 2 over current alarm Phase 2 over current alarm Phase 3 over current alarm Phase over current prealarm (Warning) Phase 1 over current pre-alarm (Warning) Phase 1 over current pre-alarm (Warning) Phase 2 over current pre-alarm (Warning) Phase 2 over current pre-alarm (Warning) Phase 3 over current pre-alarm (Warning) Phase Loss alarm Phase 1 Loss alarm Phase 1 Loss alarm Phase 2 Loss alarm Phase 2 Loss alarm Phase 3 Loss alarm Under Voltage alarm Under Voltage alarm Under Voltage alarm Over Voltage alarm Over Voltage alarm Over Voltage alarm SNMP Agent Trap Data Points 108 SEM3TM - Embedded Micro Metering ModuleTM User Manual Email SMTP and Emailing of Logs In the SEM3 system, the configured Data and Alarm logs can be emailed to specific users who have been configured in the embedded web server. The emails can be sent immediately to the configured user by clicking on Send Now button in the Active Data and Active Alarm Logs pages. The emails can also be configured to be sent periodically by configuring the day and time when the logs are expected to be emailed. SMTP Configuration The SMTP configuration involves two components. a. Email configuration b. User configuration Emailing of Logs The logs are emailed to an email server which has been configured as a designated email recipient. The email configuration from the SEM3 controller is possible if the correct settings saved in the System Settings web page. The details are located in the Email configuration section under System Settings section. The user configuration is setup in the User profile or user management section. In this section, the user details are created. The email address created in the user profile needs to match the user email address created for the SMTP server. SEM3TM - Embedded Micro Metering ModuleTM User Manual 109 Offline Configuration The offline configuration tool allows the user to create a configuration file which can be uploaded to the SEM3 controller webpages through the "Import Configuration" page. The offline configuration tool is a separate tool external to the SEM3. The offline configuration user guide listed in the Reference section provides further information regarding the offline configuration tool. The section under "Import configuration" provides information on how to upload the offline created file. As a part of the offline configuration tool implementation, importing of an externally created file of csv format is allowed. This is to enable users from importing information from a from a Siemens COMPAS quoting configuration tool. The files imported from the COMPAS or other party tools need to adhere to the following specifications. 110 csv file Specification The file format has to be .csv (Windows Comma Separated Value file). The csv file shall have three parameters ONLY. The csv file shall not have headers. The parameters shall be in the following order ONLY (Meter #, # of poles, CT amperage). The parameters shall not be entered as 0. - Meter # cannot be left blank or 0. - # of poles should be in the specific range 1, 2 or 3. - CT amperage should be in the specific range 50, 125, 250, 400, 600, 800, 1200, 1600 or 2000. The parameters shall not be entered as out of range. The parameters shall ONLY have numeric values. (Should not contain 250A for 250 Amps => correct notation = 250) Duplicate entries of meter # shall be ignored and the set of values corresponding to the first occurrence will be considered as correct values. Imported .csv File Format Specification SEM3TM - Embedded Micro Metering ModuleTM User Manual Miscellaneous Multilingual Web Pages The user can navigate to the Multi-lingual web pages for each of the embedded web page by clicking on the corresponding language from the drop down menu on the right hand side corner of the webpage. The navigable pages can be translated to the following languages. * * * * English, German, French and Spanish. Navigating to Multiple Languages Site / Installation Configuration Selection The System settings page allows user to select specific installation configuration/ Protocols. The System settings section shows additional details on the user selection process. Available Features Modbus Configuration - TCP/RTU Logging X DHCP X Dashboard X Modbus TCP X Modbus RTU X a. Modbus Configuration - TCP/RTU SNMP X b. Building Management System (BMS) - BACnet IP Gas and water meters X Modbus TCP sockets X The protocols currently selectable are the following. c. Building Management System (BMS) - BACnet MS/TP By default the Modbus Configuration - TCP/RTU is selected. If the user wishes to change the protocol to others, the corresponding protocol needs to be selected and the user needs to click on "Change Protocol" button. BACnet IP BMS - BACnet IP BMS - BACnet MS/TP X X X X X BACnet MS/TP X Available Protocols in Various Configuration Once the protocol change is underway, some of the features of the SEM3 phase 2 are disabled based on the protocol selection. SEM3TM - Embedded Micro Metering ModuleTM User Manual 111 Troubleshooting Clearing Browser Cache To clear browser cache in Chrome following steps need to be followed. 1. Navigate to Chrome -> Settings 2. Click on "Show Advanced settings" 3. Under Privacy section, Click on "Clear browsing data". 4. Check the box next to "Empty the cache". 5. Click on "Clear browsing data". Directory Structure in SD Card The SD card present with the SEM3 controller records several information within its directory structure. Explorer View of the SD Card Directory Structure 112 SEM3TM - Embedded Micro Metering ModuleTM User Manual Troubleshooting (cont'd.) Diagnostic Data The diagnostic data is recorded in the root directory of the SD card within the file named as sem3_diagnostic_data.txt. This file contains the following information. Diagnostic Field Default Information IP Address 192.168.1.65 Subnet Mask 255.255.255.0 Gateway 192.168.1.1 Modbus Slave Address 125 Modbus Baud Rate 38400 Modbus Parity Even MAC address MAC address of controller Diagnostic Data Stored in the SD Card SEM3TM - Embedded Micro Metering ModuleTM User Manual 113 Troubleshooting (cont'd.) Alarm Log, Data Log and Group Log There are several logging relevant directories which contain the respective logs such as Alarm Logs, Data Logs, and Group Logs. Each of these log directories contains the comma separated value format spreadsheets containing the logs from respective features. Each of these log files contain the date/time stamp, meter name information and the individual parameters that are deemed to be logged by the user. Event Log parameter Values (recorded only on update of value) Description Event Id Event Id number ranging from 0 - 999, rolls over when 999 is reached. 0 - 999 Module Id System or individual meter module Id number System / Meter Module Id X, where X is the module number Parameter Id Identifies the individual parameters which are logged. Power up, IP address, Subnet Mask, Default Gateway, Modbus Address, Baud Rate, Parity, Voltage Mode, Line to Line/Neutral voltage, Potential Transformer Primary, firmware upgrade, Installation configuration selection/change, Offline configuration import, Utility Seal enable/disable, Meter module specific events (CT, enable/ disable Accumulation of energy), clearing of kWH, incorrect phase and CT polarity acknowledgement. Date Date in MM-DD-YYYY format Time Time in 12 hr format showing hr:min:sec AM/PM Parameter Value Updated value of the parameter User name Logged user which caused the change in the parameter. Event Log This directory contains a comma separated value format file containing the event logs recorded for the SEM3 controller. The file contains the following parameters BACnet This directory contains the BACnet object map as well as the BACnet data logs from the SEM3 controller. Dashboard This directory contains the Group and individual Data meter dashboard information for display of the trends over day, months and year. Event Log Listing BCM Webpages Firmware Offline This directory contains the SEM3 controller embedded web pages and the related framework to support the inherent Java script files/ style sheets, images and webpage files. This directory contains the information related to the firmware loaded in the controller. The firmware diagnostic file sem3_fw_update_res.txt contains the diagnostic text message which appears on the Diagnostic page detailing the last firmware upgrade. If firmware is updated successfully the message shows "Successfully programmed image, firmware file:/ <firmware file name>, check file: <check file name>. This directory contains the offline configuration imported for the concerned SEM3 controller. Export This directory contains the exported configuration from the current SEM3 controller. This file is a JavaScript Object Notation file format. 114 The used directory shows the firmware and check files previously used to upgrade the controller. SEM3TM - Embedded Micro Metering ModuleTM User Manual Troubleshooting (cont'd.) User Input Field Requirements The following table summarizes the user input fields in the SEM3 Phase 2 web pages. User Field # User Field Tag Webpage name/ HTML Link Max Char. Length Min. Value Default Value Max. Value 1 User Name Login/ index.html 10 NA admin NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 2 Password Login/ index.html 10 NA sem3 NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 3 IP Address System Settings/ SystemSetting.html 15 0.0.0.0 192.168.1.65 255.255.255.255 Numbers (0-9), Dot sign (.) Alphabets not allowed. Other special characters not allowed. 4 Subnet Mask System Settings/ SystemSetting.html 15 0.0.0.0 255.255.255.0 255.255.255.255 Numbers (0-9), Dot sign (.) Alphabets not allowed. Other special characters not allowed. 5 Default Gateway System Settings/ SystemSetting.html 15 0.0.0.0 192.168.1.1 255.255.255.255 Numbers (0-9), Dot sign (.) Alphabets not allowed. Other special characters not allowed. 6 SMTP Server Name System Settings/ SystemSetting.html 63 NA smtp.gmail.com NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) Dot sign (.) White space not allowed. 7 SMTP Port System Settings/ SystemSetting.html 5 1 25 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 8 User Name System Settings/ SystemSetting.html 63 NA admin NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 9 Password System Settings/ SystemSetting.html 63 NA sem3 NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 10 Time Domain Name System Settings/ SystemSetting.html 63 NA NA Alphanumeric (A-Z, a-z, 0-9), Hyphen/Dash sign (-), Dot sign(.) White space not allowed. Type of characters allowed SEM3TM - Embedded Micro Metering ModuleTM User Manual Notes 115 Troubleshooting (cont'd.) 116 User Field # User Field Tag Webpage name/ HTML Link Max Char. Length 11 DNS Name System Settings/ SystemSetting.html 15 Minimum valid IP address 12 Modbus Address System Settings/ SystemSetting.html 3 1 13 Real Time refresh interval System Settings/ SystemSetting.html 3 10 14 Device Information System Settings/ SystemSetting.html 63 NA 15 Demand Sub Interval System Settings/ SystemSetting.html 5 1 16 Sub-Interval Length (Minutes) System Settings/ SystemSetting.html 5 17 PLC IP address System Settings/ SystemSetting.html 18 PLC Port Number 19 Max. Value Type of characters allowed Maximum valid IP address Numbers (0-9), Dot sign (.) Alphabets not allowed. Other special characters not allowed. White space not allowed. 126 247 Numbers (0-9) Alphabets not allowed.Other special characters not allowed. 30 900 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), comma(,), White space in between the name. No trailing or leading white space. 15 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 15 0.0.0.0 192.168.1.65 255.255.255.255 Numbers (0-9). Dot sign (.) Alphabets not allowed. Other special characters not allowed. System Settings/ SystemSetting.html 4 1 502 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. SNMP Manager IP address System Settings/ SystemSetting.html 15 0.0.0.0 192.168.1.65 255.255.255.255 Numbers (0-9). Dot sign (.) Alphabets not allowed. Other special characters not allowed. 20 Under Voltage Alarm Setpoint (%) Global / GlobalResets.html 3 20 0 100 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 21 Under Voltage Alarm Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 22 Over Voltage Alarm Setpoint (%) Global / GlobalResets.html 3 100 0 120 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 23 Over Voltage Alarm Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed, Other special characters not allowed. Min. Value Default Value SEM3TM - Embedded Micro Metering ModuleTM User Manual Notes Troubleshooting (cont'd.) User Field # User Field Tag Webpage name/ HTML Link Max Char. Length Min. Value Default Value Max. Value Type of characters allowed 24 Global Over KW Demand Alarm Setpoint (kW) Global / GlobalResets.html 4 0 0 9999 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 25 Global Over KW Demand Alarm Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 26 Global Phase Current Loss Alarm Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 27 Over Current Warning Setpoint (%) Global / GlobalResets.html 2 20 0 80 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 28 Over Current Warning Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 29 Over Current Alarm Setpoint (%) Global / GlobalResets.html 3 20 0 100 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 30 Over Current Alarm Time Delay (Seconds) Global / GlobalResets.html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 31 Meter Name Branch Meter Configuration/ BranchMeterConfig. html 19 NA Meter X NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 32 Over KW Demand Alarm Setpoint Branch Meter Configuration/ BranchMeterConfig. html 4 0 0 9999 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 33 Over KW Demand Alarm Time Delay Branch Meter Configuration/ BranchMeterConfig. html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 34 Over Current Warning Setpoint (%) Branch Meter Configuration/ BranchMeterConfig. html 2 20 0 80 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 35 Over Current Warning Time Delay (Seconds) Branch Meter Configuration/ BranchMeterConfig. html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 36 Over Current Alarm Setpoint (%) Branch Meter Configuration/ BranchMeterConfig. html 3 20 0 100 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. SEM3TM - Embedded Micro Metering ModuleTM User Manual Notes 117 Troubleshooting (cont'd.) User Field # 118 User Field Tag Webpage name/ HTML Link Max Char. Length Min. Value Default Value Max. Value Type of characters allowed 37 Over Current Alarm Time Delay (Seconds) Branch Meter Configuration/ BranchMeterConfig. html 5 1 1 65535 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 38 Meter Name Water / Gas Configuration/ MeterConfig.html 19 NA <None> NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 39 Pulse Measurement Units (in between 1 to 100) Water / Gas Configuration/ MeterConfig.html 3 1 1 100 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 40 Group Name Group/ CreateGroup.html 19 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), White space in between the name. No trailing or leading white space. 41 Depth (in between 1 to 4320 hours) Data Logging/ DataLogging.html 4 1 4320 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 42 Log Name Data Logging/ DataLogging.html 19 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 43 Depth (in between 1 to 4320 hours) Alarm Event Log/ AlarmLogging.html 4 1 4320 Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 44 Log Name Alarm Event Log/ AlarmLogging.html 19 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 45 First Name User Profile/ Profile. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. SEM3TM - Embedded Micro Metering ModuleTM User Manual Notes Troubleshooting (cont'd.) User Field # User Field Tag Webpage name/ HTML Link Max Char. Length Min. Value 46 Last Name User Profile/ Profile. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 47 Company Name User Profile/ Profile. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 48 Email User Profile/ Profile. html 50 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Dot sign (.) White space not allowed. 49 Phone User Profile/ Profile. html 10 NA NA Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 50 Existing Password User Profile/ Profile. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 51 New Password User Profile/ Profile. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 52 Confirm Password User Profile/ Profile. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 53 User ID User Management/ UserManagement. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 54 First Name User Management/ UserManagement. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. Default Value Max. Value Type of characters allowed SEM3TM - Embedded Micro Metering ModuleTM User Manual Notes 119 Troubleshooting (cont'd.) User Field # User Field Tag Webpage name/ HTML Link Max Char. Length Min. Value 55 Last Name User Management/ UserManagement. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 56 Company Name User Management/ UserManagement. html 20 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#), Dot sign (.), White space in between the name. No trailing or leading white space. 57 Email User Management/ UserManagement. html 49 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Dot sign (.) White space not allowed. 58 Phone User Management/ UserManagement. html 10 NA NA Numbers (0-9) Alphabets not allowed. Other special characters not allowed. 59 Password User Management/ UserManagement. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. 60 Confirm Password User Management/ UserManagement. html 10 NA NA Alphanumeric (A-Z, a-z, 0-9), At sign (@), Hyphen/Dash sign (-), Underscore (_), Pound/Hashtag (#) White space not allowed. Dot sign not allowed. Default Value Max. Value Type of characters allowed Notes User Input Field Requirements Note: As a comparison, please note a typical Windows file system does not allow following characters to be included in the file name: \/:*?"<>| 120 SEM3TM - Embedded Micro Metering ModuleTM User Manual Troubleshooting (cont'd.) Webpage Access by User Denomination The SEM3 system web pages access is restricted based on the user access level. Web pages / Actions Supervisor Controller Observer Login Page X X X Home Page X X X System Settings Page X Change IP Configuration X Change Email configuration X Change Modbus RTU Slave Configuration X Change Utility Seal selection X Change System Time setup selection X Change Web settings X Change Panel Configuration X Read/Modify System Information X Change Water/Gas communication configuration X Change SNMP communication configuration X Change Installation Configuration/ Protocol selection X Global Settings Page X Change Global configuration settings X View Global Alarm Summary X Clear Global Voltage Alarm X Perform Global Resets (Energy, Demands, Alarms etc.) X Multi-Pole Configuration Page X Configure Meter Modules as multi-pole selection Branch Meter Configuration Page X X Configure Meter Module Parameter X Configure Grouped Meter Parameter X Water and Gas Meter Selection Page X Water and Gas Meter Configuration Page X Mini Monitor Configuration Page X Group Page X Create and Save new Group X Edit previously created group X Delete previously created group X Real Time Page X X X Viewing of Grouped Meter data X X X Clearing of kWh X X Clearing of Active Alarms X X Resetting of Water and Gas Pulses X X SEM3TM - Embedded Micro Metering ModuleTM User Manual 121 Troubleshooting (cont'd.) Web pages / Actions Supervisor Data Log Page Controller Observer X X X Create Meter Logs/ Group Meter Logs X View Meter/Group Meter Active Logs X Initiate Start Log Action X Alarm Event Log X Create Meter Logs/ Group Meter Logs X View Meter/Group Meter Active Logs X Initiate Start Log Action X System Event Log Page X Download the Event Log X X X Print the Event Log X X X Clear System Event Log X X X X X X X X X X X X X X X Meter Dashboard X Clear Dashboard X Group Dashboard X Clear Dashboard X User Profile Page Modify information in the user profile (including change password) User Management Page X Add/Modify/Delete Users X Diagnostic Page X Clear CT Phase Angle Indication X Clear CT Polarity Indication X Download mini register map X Download full register map X View Detailed Modbus information per meter module X Upgrade Controller Firmware X Meter Module Serial Numbers Page X Import Configuration X Export Configuration X BACnet IP Settings Page X Modify BACnet IP Settings X Download BACnet Object map X BACnet IP Data Logs X BACnet IP Foreign Device Registration X BACnet MS/TP Settings Page X Modify BACnet MS/TP Settings X Download BACnet Object map X BACnet MS/TP Data Logs Page X Webpage Access by User Level Note: In above table, "X" means that the corresponding user access level has access. 122 SEM3TM - Embedded Micro Metering ModuleTM User Manual Troubleshooting (cont'd.) Order of Mini Monitor Data Points in Modbus Map after Configuration The `Mini Monitor List' box will display the Modbus map after the Modbus configuration is saved and the webpage is refreshed. For example if the user selects the data points in the order as shown below and clicks on the save button to save the configuration. Mini Monitor List Before Save Operation After this operation, the configuration will be saved and the webpage will be refreshed to show the order of the `Mini Monitor List'. The order of the data points on the list is dependent on the orders the data points were listed in the available Modbus map designed in the firmware. Mini Monitor List After Save Operation SEM3TM - Embedded Micro Metering ModuleTM User Manual 123 Troubleshooting (cont'd.) Menus on the Webpage in Multi-languages Following screens show the view of the menus for the different languages. Menu - German Menu - French Menu - Spanish 124 SEM3TM - Embedded Micro Metering ModuleTM User Manual SEM3TM - Embedded Micro Metering ModuleTM User Manual 125 Modbus Information SEM3 Modbus Alarm Registers Single-Phase Monitor Alarms Modbus Address External 126 Reg. Size Monitor ID Format Access Default Description Alarm Active bits: (write 1 to alarm bit to clear alarm) 40001 Single-Phase Monitor 1 Alarm Flags 1 Bit Field RW 0x0000 40002 Single-Phase Monitor 2 Alarm Flags 1 Bit Field RW 0x0000 40003 Single-Phase Monitor 3 Alarm Flags 1 Bit Field RW 0x0000 0x0001 - Phase Loss (0 amps) Alarm bit 40004 Single-Phase Monitor 4 Alarm Flags 1 Bit Field RW 0x0000 0x0002 - Phase Over Current Pre-Alarm bit 40005 Single-Phase Monitor 5 Alarm Flags 1 Bit Field RW 0x0000 0x0004 - Phase Over Current Alarm bit 40006 Single-Phase Monitor 6 Alarm Flags 1 Bit Field RW 0x0000 40007 Single-Phase Monitor 7 Alarm Flags 1 Bit Field RW 0x0000 0x1000 - Monitor Over KW Demand Alarm bit 40008 Single-Phase Monitor 8 Alarm Flags 1 Bit Field RW 0x0000 40009 Single-Phase Monitor 9 Alarm Flags 1 Bit Field RW 0x0000 40010 Single-Phase Monitor 10 Alarm Flags 1 Bit Field RW 0x0000 40011 Single-Phase Monitor 11 Alarm Flags 1 Bit Field RW 0x0000 40012 Single-Phase Monitor 12 Alarm Flags 1 Bit Field RW 0x0000 40013 Single-Phase Monitor 13 Alarm Flags 1 Bit Field RW 0x0000 40014 Single-Phase Monitor 14 Alarm Flags 1 Bit Field RW 0x0000 40015 Single-Phase Monitor 15 Alarm Flags 1 Bit Field RW 0x0000 40016 Single-Phase Monitor 16 Alarm Flags 1 Bit Field RW 0x0000 40017 Single-Phase Monitor 17 Alarm Flags 1 Bit Field RW 0x0000 40018 Single-Phase Monitor 18 Alarm Flags 1 Bit Field RW 0x0000 40019 Single-Phase Monitor 19 Alarm Flags 1 Bit Field RW 0x0000 40020 Single-Phase Monitor 20 Alarm Flags 1 Bit Field RW 0x0000 40021 Single-Phase Monitor 21 Alarm Flags 1 Bit Field RW 0x0000 40022 Single-Phase Monitor 22 Alarm Flags 1 Bit Field RW 0x0000 40023 Single-Phase Monitor 23 Alarm Flags 1 Bit Field RW 0x0000 40024 Single-Phase Monitor 24 Alarm Flags 1 Bit Field RW 0x0000 40025 Single-Phase Monitor 25 Alarm Flags 1 Bit Field RW 0x0000 40026 Single-Phase Monitor 26 Alarm Flags 1 Bit Field RW 0x0000 40027 Single-Phase Monitor 27 Alarm Flags 1 Bit Field RW 0x0000 40028 Single-Phase Monitor 28 Alarm Flags 1 Bit Field RW 0x0000 40029 Single-Phase Monitor 29 Alarm Flags 1 Bit Field RW 0x0000 40030 Single-Phase Monitor 30 Alarm Flags 1 Bit Field RW 0x0000 40031 Single-Phase Monitor 31 Alarm Flags 1 Bit Field RW 0x0000 40032 Single-Phase Monitor 32 Alarm Flags 1 Bit Field RW 0x0000 40033 Single-Phase Monitor 33 Alarm Flags 1 Bit Field RW 0x0000 40034 Single-Phase Monitor 34 Alarm Flags 1 Bit Field RW 0x0000 40035 Single-Phase Monitor 35 Alarm Flags 1 Bit Field RW 0x0000 40036 Single-Phase Monitor 36 Alarm Flags 1 Bit Field RW 0x0000 40037 Single-Phase Monitor 37 Alarm Flags 1 Bit Field RW 0x0000 40038 Single-Phase Monitor 38 Alarm Flags 1 Bit Field RW 0x0000 40039 Single-Phase Monitor 39 Alarm Flags 1 Bit Field RW 0x0000 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Modbus Alarm Registers (cont'd.) Single-Phase Monitor Alarms (cont'd.) Modbus Address External Reg. Size Monitor ID Format Access Default 40040 Single-Phase Monitor 40 Alarm Flags 1 Bit Field RW 0x0000 40041 Single-Phase Monitor 41 Alarm Flags 1 Bit Field RW 0x0000 40042 Single-Phase Monitor 42 Alarm Flags 1 Bit Field RW 0x0000 40043 Single-Phase Monitor 43 Alarm Flags 1 Bit Field RW 0x0000 40044 Single-Phase Monitor 44 Alarm Flags 1 Bit Field RW 0x0000 40045 Single-Phase Monitor 45 Alarm Flags 1 Bit Field RW 0x0000 40046 Single-Phase Monitor 46 Alarm Flags 1 Bit Field RW 0x0000 40047 Single-Phase Monitor 47 Alarm Flags 1 Bit Field RW 0x0000 40048 Single-Phase Monitor 48 Alarm Flags 1 Bit Field RW 0x0000 40049 Single-Phase Monitor 49 Alarm Flags 1 Bit Field RW 0x0000 40050 Single-Phase Monitor 50 Alarm Flags 1 Bit Field RW 0x0000 40051 Single-Phase Monitor 51 Alarm Flags 1 Bit Field RW 0x0000 40052 Single-Phase Monitor 52 Alarm Flags 1 Bit Field RW 0x0000 40053 Single-Phase Monitor 53 Alarm Flags 1 Bit Field RW 0x0000 40054 Single-Phase Monitor 54 Alarm Flags 1 Bit Field RW 0x0000 40055 Single-Phase Monitor 55 Alarm Flags 1 Bit Field RW 0x0000 40056 Single-Phase Monitor 56 Alarm Flags 1 Bit Field RW 0x0000 40057 Single-Phase Monitor 57 Alarm Flags 1 Bit Field RW 0x0000 40058 Single-Phase Monitor 58 Alarm Flags 1 Bit Field RW 0x0000 40059 Single-Phase Monitor 59 Alarm Flags 1 Bit Field RW 0x0000 40060 Single-Phase Monitor 60 Alarm Flags 1 Bit Field RW 0x0000 40061 Single-Phase Monitor 61 Alarm Flags 1 Bit Field RW 0x0000 40062 Single-Phase Monitor 62 Alarm Flags 1 Bit Field RW 0x0000 40063 Single-Phase Monitor 63 Alarm Flags 1 Bit Field RW 0x0000 Total Registers Description 63 Dual-Phase Monitor Alarms Modbus Address External Monitor ID Reg. Size Format Access Default Description 40101 Dual-Phase Monitor 1 Alarm Flags 1 Bit Field RW 0x0000 Alarm Active bits: (write 1 to alarm bit to clear alarm) 40102 Dual-Phase Monitor 2 Alarm Flags 1 Bit Field RW 0x0000 40103 Dual-Phase Monitor 3 Alarm Flags 1 Bit Field RW 0x0000 0x0001 - Phase 1 Loss (0 amps) Alarm bit 40104 Dual-Phase Monitor 4 Alarm Flags 1 Bit Field RW 0x0000 0x0002 - Phase 1 Over Current Pre-Alarm bit 40105 Dual-Phase Monitor 5 Alarm Flags 1 Bit Field RW 0x0000 0x0004 - Phase 1 Over Current Alarm bit 0x0010 - Phase 2 Loss (0 amps) Alarm bit 40106 Dual-Phase Monitor 6 Alarm Flags 1 Bit Field RW 0x0000 40107 Dual-Phase Monitor 7 Alarm Flags 1 Bit Field RW 0x0000 40108 Dual-Phase Monitor 8 Alarm Flags 1 Bit Field RW 0x0000 40109 Dual-Phase Monitor 9 Alarm Flags 1 Bit Field RW 0x0000 40110 Dual-Phase Monitor 10 Alarm Flags 1 Bit Field RW 0x0000 0x0020 - Phase 2 Over Current Pre-Alarm bit 0x0040 - Phase 2 Over Current Alarm bit 0x1000 - Monitor Over KW Demand Alarm bit SEM3TM - Embedded Micro Metering ModuleTM User Manual 127 Modbus Information (cont'd.) SEM3 Modbus Alarm Registers (cont'd.) Dual-Phase Monitor alarms (cont'd.) Modbus Address External 128 Monitor ID Reg. Size Format Access Default 40111 Dual-Phase Monitor 11 Alarm Flags 1 Bit Field RW 0x0000 40112 Dual-Phase Monitor 12 Alarm Flags 1 Bit Field RW 0x0000 40113 Dual-Phase Monitor 13 Alarm Flags 1 Bit Field RW 0x0000 40114 Dual-Phase Monitor 14 Alarm Flags 1 Bit Field RW 0x0000 40115 Dual-Phase Monitor 15 Alarm Flags 1 Bit Field RW 0x0000 40116 Dual-Phase Monitor 16 Alarm Flags 1 Bit Field RW 0x0000 40117 Dual-Phase Monitor 17 Alarm Flags 1 Bit Field RW 0x0000 40118 Dual-Phase Monitor 18 Alarm Flags 1 Bit Field RW 0x0000 40119 Dual-Phase Monitor 19 Alarm Flags 1 Bit Field RW 0x0000 40120 Dual-Phase Monitor 20 Alarm Flags 1 Bit Field RW 0x0000 40121 Dual-Phase Monitor 21 Alarm Flags 1 Bit Field RW 0x0000 40122 Dual-Phase Monitor 22 Alarm Flags 1 Bit Field RW 0x0000 40123 Dual-Phase Monitor 23 Alarm Flags 1 Bit Field RW 0x0000 40124 Dual-Phase Monitor 24 Alarm Flags 1 Bit Field RW 0x0000 40125 Dual-Phase Monitor 25 Alarm Flags 1 Bit Field RW 0x0000 40126 Dual-Phase Monitor 26 Alarm Flags 1 Bit Field RW 0x0000 40127 Dual-Phase Monitor 27 Alarm Flags 1 Bit Field RW 0x0000 40128 Dual-Phase Monitor 28 Alarm Flags 1 Bit Field RW 0x0000 40129 Dual-Phase Monitor 29 Alarm Flags 1 Bit Field RW 0x0000 40130 Dual-Phase Monitor 30 Alarm Flags 1 Bit Field RW 0x0000 40131 Dual-Phase Monitor 31 Alarm Flags 1 Bit Field RW 0x0000 40132 Dual-Phase Monitor 32 Alarm Flags 1 Bit Field RW 0x0000 40133 Dual-Phase Monitor 33 Alarm Flags 1 Bit Field RW 0x0000 40134 Dual-Phase Monitor 34 Alarm Flags 1 Bit Field RW 0x0000 40135 Dual-Phase Monitor 35 Alarm Flags 1 Bit Field RW 0x0000 40136 Dual-Phase Monitor 36 Alarm Flags 1 Bit Field RW 0x0000 40137 Dual-Phase Monitor 37 Alarm Flags 1 Bit Field RW 0x0000 40138 Dual-Phase Monitor 38 Alarm Flags 1 Bit Field RW 0x0000 40139 Dual-Phase Monitor 39 Alarm Flags 1 Bit Field RW 0x0000 40140 Dual-Phase Monitor 40 Alarm Flags 1 Bit Field RW 0x0000 40141 Dual-Phase Monitor 41 Alarm Flags 1 Bit Field RW 0x0000 40142 Dual-Phase Monitor 42 Alarm Flags 1 Bit Field RW 0x0000 40143 Dual-Phase Monitor 43 Alarm Flags 1 Bit Field RW 0x0000 40144 Dual-Phase Monitor 44 Alarm Flags 1 Bit Field RW 0x0000 40145 Dual-Phase Monitor 45 Alarm Flags 1 Bit Field RW 0x0000 40146 Dual-Phase Monitor 46 Alarm Flags 1 Bit Field RW 0x0000 40147 Dual-Phase Monitor 47 Alarm Flags 1 Bit Field RW 0x0000 40148 Dual-Phase Monitor 48 Alarm Flags 1 Bit Field RW 0x0000 40149 Dual-Phase Monitor 49 Alarm Flags 1 Bit Field RW 0x0000 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Modbus Alarm Registers (cont'd.) Dual-Phase Monitor alarms (cont'd.) Modbus Address External Reg. Size Monitor ID Format Access Default 40150 Dual-Phase Monitor 50 Alarm Flags 1 Bit Field RW 0x0000 40151 Dual-Phase Monitor 51 Alarm Flags 1 Bit Field RW 0x0000 40152 Dual-Phase Monitor 52 Alarm Flags 1 Bit Field RW 0x0000 40153 Dual-Phase Monitor 53 Alarm Flags 1 Bit Field RW 0x0000 40154 Dual-Phase Monitor 54 Alarm Flags 1 Bit Field RW 0x0000 40155 Dual-Phase Monitor 55 Alarm Flags 1 Bit Field RW 0x0000 40156 Dual-Phase Monitor 56 Alarm Flags 1 Bit Field RW 0x0000 40157 Dual-Phase Monitor 57 Alarm Flags 1 Bit Field RW 0x0000 40158 Dual-Phase Monitor 58 Alarm Flags 1 Bit Field RW 0x0000 40159 Dual-Phase Monitor 59 Alarm Flags 1 Bit Field RW 0x0000 40160 Dual-Phase Monitor 60 Alarm Flags 1 Bit Field RW 0x0000 40161 Dual-Phase Monitor 61 Alarm Flags 1 Bit Field RW 0x0000 40162 Dual-Phase Monitor 62 Alarm Flags 1 Bit Field RW 0x0000 Total Registers Description 62 Three-Phase Monitor Alarms Modbus Address External Monitor ID Reg. Size Format Access Default Description 40201 Three-Phase Monitor 1 Alarm Flags 1 Bit Field RW 0x0000 Alarm Active bits: (write 1 to alarm bit to clear alarm) 40202 Three-Phase Monitor 2 Alarm Flags 1 Bit Field RW 0x0000 40203 Three-Phase Monitor 3 Alarm Flags 1 Bit Field RW 0x0000 0x0001 - Phase 1 Loss (0 amps) Alarm bit 40204 Three-Phase Monitor 4 Alarm Flags 1 Bit Field RW 0x0000 0x0002 - Phase 1 Over Current Pre-Alarm bit 40205 Three-Phase Monitor 5 Alarm Flags 1 Bit Field RW 0x0000 0x0004 - Phase 1 Over Current Alarm bit 0x0010 - Phase 2 Loss (0 amps) Alarm bit 40206 Three-Phase Monitor 6 Alarm Flags 1 Bit Field RW 0x0000 40207 Three-Phase Monitor 7 Alarm Flags 1 Bit Field RW 0x0000 40208 Three-Phase Monitor 8 Alarm Flags 1 Bit Field RW 0x0000 40209 Three-Phase Monitor 9 Alarm Flags 1 Bit Field RW 0x0000 40210 Three-Phase Monitor 10 Alarm Flags 1 Bit Field RW 0x0000 40211 Three-Phase Monitor 11 Alarm Flags 1 Bit Field RW 0x0000 0x0200 - Phase 3 Over Current Pre-Alarm bit 40212 Three-Phase Monitor 12 Alarm Flags 1 Bit Field RW 0x0000 0x0400 - Phase 3 Over Current Alarm bit 0x1000 - Monitor Over KW Demand Alarm bit 40213 Three-Phase Monitor 13 Alarm Flags 1 Bit Field RW 0x0000 40214 Three-Phase Monitor 14 Alarm Flags 1 Bit Field RW 0x0000 40215 Three-Phase Monitor 15 Alarm Flags 1 Bit Field RW 0x0000 40216 Three-Phase Monitor 16 Alarm Flags 1 Bit Field RW 0x0000 40217 Three-Phase Monitor 17 Alarm Flags 1 Bit Field RW 0x0000 40218 Three-Phase Monitor 18 Alarm Flags 1 Bit Field RW 0x0000 40219 Three-Phase Monitor 19 Alarm Flags 1 Bit Field RW 0x0000 40220 Three-Phase Monitor 20 Alarm Flags 1 Bit Field RW 0x0000 40221 Three-Phase Monitor 21 Alarm Flags 1 Bit Field RW 0x0000 0x0020 - Phase 2 Over Current Pre-Alarm bit 0x0040 - Phase 2 Over Current Alarm bit 0x0100 - Phase 3 Loss (0 amps) Alarm bit SEM3TM - Embedded Micro Metering ModuleTM User Manual 129 Modbus Information (cont'd.) SEM3 Modbus Alarm Registers (cont'd.) Three-Phase Monitor Alarms (cont'd.) Modbus Address External 130 Reg. Size Monitor ID Format Access Default 40222 Three-Phase Monitor 22 Alarm Flags 1 Bit Field RW 0x0000 40223 Three-Phase Monitor 23 Alarm Flags 1 Bit Field RW 0x0000 40224 Three-Phase Monitor 24 Alarm Flags 1 Bit Field RW 0x0000 40225 Three-Phase Monitor 25 Alarm Flags 1 Bit Field RW 0x0000 40226 Three-Phase Monitor 26 Alarm Flags 1 Bit Field RW 0x0000 40227 Three-Phase Monitor 27 Alarm Flags 1 Bit Field RW 0x0000 40228 Three-Phase Monitor 28 Alarm Flags 1 Bit Field RW 0x0000 40229 Three-Phase Monitor 29 Alarm Flags 1 Bit Field RW 0x0000 40230 Three-Phase Monitor 30 Alarm Flags 1 Bit Field RW 0x0000 40231 Three-Phase Monitor 31 Alarm Flags 1 Bit Field RW 0x0000 40232 Three-Phase Monitor 32 Alarm Flags 1 Bit Field RW 0x0000 40233 Three-Phase Monitor 33 Alarm Flags 1 Bit Field RW 0x0000 40234 Three-Phase Monitor 34 Alarm Flags 1 Bit Field RW 0x0000 40235 Three-Phase Monitor 35 Alarm Flags 1 Bit Field RW 0x0000 40236 Three-Phase Monitor 36 Alarm Flags 1 Bit Field RW 0x0000 40237 Three-Phase Monitor 37 Alarm Flags 1 Bit Field RW 0x0000 40238 Three-Phase Monitor 38 Alarm Flags 1 Bit Field RW 0x0000 40239 Three-Phase Monitor 39 Alarm Flags 1 Bit Field RW 0x0000 40240 Three-Phase Monitor 40 Alarm Flags 1 Bit Field RW 0x0000 40241 Three-Phase Monitor 41 Alarm Flags 1 Bit Field RW 0x0000 40242 Three-Phase Monitor 42 Alarm Flags 1 Bit Field RW 0x0000 40243 Three-Phase Monitor 43 Alarm Flags 1 Bit Field RW 0x0000 40244 Three-Phase Monitor 44 Alarm Flags 1 Bit Field RW 0x0000 40245 Three-Phase Monitor 45 Alarm Flags 1 Bit Field RW 0x0000 40246 Three-Phase Monitor 46 Alarm Flags 1 Bit Field RW 0x0000 40247 Three-Phase Monitor 47 Alarm Flags 1 Bit Field RW 0x0000 40248 Three-Phase Monitor 48 Alarm Flags 1 Bit Field RW 0x0000 40249 Three-Phase Monitor 49 Alarm Flags 1 Bit Field RW 0x0000 40250 Three-Phase Monitor 50 Alarm Flags 1 Bit Field RW 0x0000 40251 Three-Phase Monitor 51 Alarm Flags 1 Bit Field RW 0x0000 40252 Three-Phase Monitor 52 Alarm Flags 1 Bit Field RW 0x0000 40253 Three-Phase Monitor 53 Alarm Flags 1 Bit Field RW 0x0000 40254 Three-Phase Monitor 54 Alarm Flags 1 Bit Field RW 0x0000 40255 Three-Phase Monitor 55 Alarm Flags 1 Bit Field RW 0x0000 40256 Three-Phase Monitor 56 Alarm Flags 1 Bit Field RW 0x0000 40257 Three-Phase Monitor 57 Alarm Flags 1 Bit Field RW 0x0000 40258 Three-Phase Monitor 58 Alarm Flags 1 Bit Field RW 0x0000 40259 Three-Phase Monitor 59 Alarm Flags 1 Bit Field RW 0x0000 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Modbus Alarm Registers (cont'd.) Three-Phase Monitor Alarms (cont'd.) Modbus Address External Reg. Size Monitor ID Format Access Default 40260 Three-Phase Monitor 60 Alarm Flags 1 Bit Field RW 0x0000 40261 Three-Phase Monitor 61 Alarm Flags 1 Bit Field RW 0x0000 Total Registers Description 61 Mini-Monitor Data Registers Modbus Address External 40301 Reg. Count Single-Phase Mini-Monitors Single-Phase Mini-Monitor 1 base address 10 40311 Single-Phase Mini-Monitor 2 base address 10 40321 Single-Phase Mini-Monitor 3 base address 10 40331 Single-Phase Mini-Monitor 4 base address 10 40341 Single-Phase Mini-Monitor 5 base address 10 40351 Single-Phase Mini-Monitor 6 base address 10 40361 Single-Phase Mini-Monitor 7 base address 10 40371 Single-Phase Mini-Monitor 8 base address 10 40381 Single-Phase Mini-Monitor 9 base address 10 40391 Single-Phase Mini-Monitor 10 base address 10 40401 Single-Phase Mini-Monitor 11 base address 10 40411 Single-Phase Mini-Monitor 12 base address 10 40421 Single-Phase Mini-Monitor 13 base address 10 40431 Single-Phase Mini-Monitor 14 base address 10 40441 Single-Phase Mini-Monitor 15 base address 10 40451 Single-Phase Mini-Monitor 16 base address 10 40461 Single-Phase Mini-Monitor 17 base address 10 40471 Single-Phase Mini-Monitor 18 base address 10 40481 Single-Phase Mini-Monitor 19 base address 10 40491 Single-Phase Mini-Monitor 20 base address 10 40501 Single-Phase Mini-Monitor 21 base address 10 SEM3TM - Embedded Micro Metering ModuleTM User Manual 131 Modbus Information (cont'd.) Mini-Monitor Data Registers (cont'd.) Modbus Address External 40511 132 Single-Phase Mini-Monitors (cont'd.) Single-Phase Mini-Monitor 22 base address Reg. Count 10 40521 Single-Phase Mini-Monitor 23 base address 10 40531 Single-Phase Mini-Monitor 24 base address 10 40541 Single-Phase Mini-Monitor 25 base address 10 40551 Single-Phase Mini-Monitor 26 base address 10 40561 Single-Phase Mini-Monitor 27 base address 10 40571 Single-Phase Mini-Monitor 28 base address 10 40581 Single-Phase Mini-Monitor 29 base address 10 40591 Single-Phase Mini-Monitor 30 base address 10 40601 Single-Phase Mini-Monitor 31 base address 10 40611 Single-Phase Mini-Monitor 32 base address 10 40621 Single-Phase Mini-Monitor 33 base address 10 40631 Single-Phase Mini-Monitor 34 base address 10 40641 Single-Phase Mini-Monitor 35 base address 10 40651 Single-Phase Mini-Monitor 36 base address 10 40661 Single-Phase Mini-Monitor 37 base address 10 40671 Single-Phase Mini-Monitor 38 base address 10 40681 Single-Phase Mini-Monitor 39 base address 10 40691 Single-Phase Mini-Monitor 40 base address 10 40701 Single-Phase Mini-Monitor 41 base address 10 40711 Single-Phase Mini-Monitor 42 base address 10 40721 Single-Phase Mini-Monitor 43 base address 10 40731 Single-Phase Mini-Monitor 44 base address 10 40741 Single-Phase Mini-Monitor 45 base address 10 40751 Single-Phase Mini-Monitor 46 base address 10 40761 Single-Phase Mini-Monitor 47 base address 10 40771 Single-Phase Mini-Monitor 48 base address 10 40781 Single-Phase Mini-Monitor 49 base address 10 40791 Single-Phase Mini-Monitor 50 base address 10 40801 Single-Phase Mini-Monitor 51 base address 10 40811 Single-Phase Mini-Monitor 52 base address 10 40821 Single-Phase Mini-Monitor 53 base address 10 40831 Single-Phase Mini-Monitor 54 base address 10 40841 Single-Phase Mini-Monitor 55 base address 10 40851 Single-Phase Mini-Monitor 56 base address 10 40861 Single-Phase Mini-Monitor 57 base address 10 40871 Single-Phase Mini-Monitor 58 base address 10 40881 Single-Phase Mini-Monitor 59 base address 10 40891 Single-Phase Mini-Monitor 60 base address 10 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) Mini-Monitor Data Registers (cont'd.) Modbus Address External 40901 Single-Phase Mini-Monitors (cont'd.) Single-Phase Mini-Monitor 61 base address Reg. Count 10 40911 Single-Phase Mini-Monitor 62 base address 10 40921 Single-Phase Mini-Monitor 63 base address 10 40931 Dual-Phase Mini-Monitor 1 base address 10 40941 Dual-Phase Mini-Monitor 2 base address 10 40951 Dual-Phase Mini-Monitor 3 base address 10 40961 Dual-Phase Mini-Monitor 4 base address 10 40971 Dual-Phase Mini-Monitor 5 base address 10 40981 Dual-Phase Mini-Monitor 6 base address 10 40991 Dual-Phase Mini-Monitor 7 base address 10 41001 Dual-Phase Mini-Monitor 8 base address 10 41011 Dual-Phase Mini-Monitor 9 base address 10 41021 Dual-Phase Mini-Monitor 10 base address 10 41031 Dual-Phase Mini-Monitor 11 base address 10 41041 Dual-Phase Mini-Monitor 12 base address 10 41051 Dual-Phase Mini-Monitor 13 base address 10 41061 Dual-Phase Mini-Monitor 14 base address 10 41071 Dual-Phase Mini-Monitor 15 base address 10 41081 Dual-Phase Mini-Monitor 16 base address 10 41091 Dual-Phase Mini-Monitor 17 base address 10 41101 Dual-Phase Mini-Monitor 18 base address 10 41111 Dual-Phase Mini-Monitor 19 base address 10 41121 Dual-Phase Mini-Monitor 20 base address 10 41131 Dual-Phase Mini-Monitor 21 base address 10 41141 Dual-Phase Mini-Monitor 22 base address 10 41151 Dual-Phase Mini-Monitor 23 base address 10 41161 Dual-Phase Mini-Monitor 24 base address 10 41171 Dual-Phase Mini-Monitor 25 base address 10 41181 Dual-Phase Mini-Monitor 26 base address 10 41191 Dual-Phase Mini-Monitor 27 base address 10 41201 Dual-Phase Mini-Monitor 28 base address 10 41211 Dual-Phase Mini-Monitor 29 base address 10 41221 Dual-Phase Mini-Monitor 30 base address 10 41231 Dual-Phase Mini-Monitor 31 base address 10 41241 Dual-Phase Mini-Monitor 32 base address 10 41251 Dual-Phase Mini-Monitor 33 base address 10 41261 Dual-Phase Mini-Monitor 34 base address 10 41271 Dual-Phase Mini-Monitor 35 base address 10 41281 Dual-Phase Mini-Monitor 36 base address 10 SEM3TM - Embedded Micro Metering ModuleTM User Manual 133 Modbus Information (cont'd.) Mini-Monitor Data Registers (cont'd.) Modbus Address External 41291 134 Single-Phase Mini-Monitors (cont'd.) Dual-Phase Mini-Monitor 37 base address Reg. Count 10 41301 Dual-Phase Mini-Monitor 38 base address 10 41311 Dual-Phase Mini-Monitor 39 base address 10 41321 Dual-Phase Mini-Monitor 40 base address 10 41331 Dual-Phase Mini-Monitor 41 base address 10 41341 Dual-Phase Mini-Monitor 42 base address 10 41351 Dual-Phase Mini-Monitor 43 base address 10 41361 Dual-Phase Mini-Monitor 44 base address 10 41371 Dual-Phase Mini-Monitor 45 base address 10 41381 Dual-Phase Mini-Monitor 46 base address 10 41391 Dual-Phase Mini-Monitor 47 base address 10 41401 Dual-Phase Mini-Monitor 48 base address 10 41411 Dual-Phase Mini-Monitor 49 base address 10 41421 Dual-Phase Mini-Monitor 50 base address 10 10 41431 Dual-Phase Mini-Monitor 51 base address 41441 Dual-Phase Mini-Monitor 52 base address 10 41451 Dual-Phase Mini-Monitor 53 base address 10 41461 Dual-Phase Mini-Monitor 54 base address 10 41471 Dual-Phase Mini-Monitor 55 base address 10 41481 Dual-Phase Mini-Monitor 56 base address 10 41491 Dual-Phase Mini-Monitor 57 base address 10 41501 Dual-Phase Mini-Monitor 58 base address 10 41511 Dual-Phase Mini-Monitor 59 base address 10 41521 Dual-Phase Mini-Monitor 60 base address 10 41531 Dual-Phase Mini-Monitor 61 base address 10 41541 Dual-Phase Mini-Monitor 62 base address 10 41551 Three-Phase Mini-Monitor 1 base address 10 41561 Three-Phase Mini-Monitor 2 base address 10 41571 Three-Phase Mini-Monitor 3 base address 10 41581 Three-Phase Mini-Monitor 4 base address 10 41591 Three-Phase Mini-Monitor 5 base address 10 41601 Three-Phase Mini-Monitor 6 base address 10 41611 Three-Phase Mini-Monitor 7 base address 10 41621 Three-Phase Mini-Monitor 8 base address 10 41631 Three-Phase Mini-Monitor 9 base address 10 41641 Three-Phase Mini-Monitor 10 base address 10 41651 Three-Phase Mini-Monitor 11 base address 10 41661 Three-Phase Mini-Monitor 12 base address 10 41671 Three-Phase Mini-Monitor 13 base address 10 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) Mini-Monitor Data Registers (cont'd.) Modbus Address External 41681 Single-Phase Mini-Monitors (cont'd.) Three-Phase Mini-Monitor 14 base address Reg. Count 10 41691 Three-Phase Mini-Monitor 15 base address 10 41701 Three-Phase Mini-Monitor 16 base address 10 41711 Three-Phase Mini-Monitor 17 base address 10 41721 Three-Phase Mini-Monitor 18 base address 10 41731 Three-Phase Mini-Monitor 19 base address 10 41741 Three-Phase Mini-Monitor 20 base address 10 41751 Three-Phase Mini-Monitor 21 base address 10 41761 Three-Phase Mini-Monitor 22 base address 10 41771 Three-Phase Mini-Monitor 23 base address 10 41781 Three-Phase Mini-Monitor 24 base address 10 41791 Three-Phase Mini-Monitor 25 base address 10 41801 Three-Phase Mini-Monitor 26 base address 10 41811 Three-Phase Mini-Monitor 27 base address 10 41821 Three-Phase Mini-Monitor 28 base address 10 41831 Three-Phase Mini-Monitor 29 base address 10 41841 Three-Phase Mini-Monitor 30 base address 10 41851 Three-Phase Mini-Monitor 31 base address 10 41861 Three-Phase Mini-Monitor 32 base address 10 41871 Three-Phase Mini-Monitor 33 base address 10 41881 Three-Phase Mini-Monitor 34 base address 10 41891 Three-Phase Mini-Monitor 35 base address 10 41901 Three-Phase Mini-Monitor 36 base address 10 41911 Three-Phase Mini-Monitor 37 base address 10 41921 Three-Phase Mini-Monitor 38 base address 10 41931 Three-Phase Mini-Monitor 39 base address 10 41941 Three-Phase Mini-Monitor 40 base address 10 41951 Three-Phase Mini-Monitor 41 base address 10 41961 Three-Phase Mini-Monitor 42 base address 10 41971 Three-Phase Mini-Monitor 43 base address 10 41981 Three-Phase Mini-Monitor 44 base address 10 41991 Three-Phase Mini-Monitor 45 base address 10 42001 Three-Phase Mini-Monitor 46 base address 10 42011 Three-Phase Mini-Monitor 47 base address 10 42021 Three-Phase Mini-Monitor 48 base address 10 42031 Three-Phase Mini-Monitor 49 base address 10 42041 Three-Phase Mini-Monitor 50 base address 10 42051 Three-Phase Mini-Monitor 51 base address 10 42061 Three-Phase Mini-Monitor 52 base address 10 SEM3TM - Embedded Micro Metering ModuleTM User Manual 135 Modbus Information (cont'd.) Mini-Monitor Data Registers (cont'd.) Modbus Address External 42071 Single-Phase Mini-Monitors (cont'd.) Three-Phase Mini-Monitor 53 base address 10 42081 Three-Phase Mini-Monitor 54 base address 10 42091 Three-Phase Mini-Monitor 55 base address 10 42101 Three-Phase Mini-Monitor 56 base address 10 42111 Three-Phase Mini-Monitor 57 base address 10 42121 Three-Phase Mini-Monitor 58 base address 10 42131 Three-Phase Mini-Monitor 59 base address 10 42141 Three-Phase Mini-Monitor 60 base address 10 Three-Phase Mini-Monitor 61 base address 10 42151 Total Registers 136 Reg. Count 1860 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers Single-Phase Monitor Data Registers Address Offsets Data Reg. Size Format Access Range Default Resolution Description Base Volts 2 Float-32 RO - - 0.001 Volts Each Single Phase Monitor contains these 28 data items in the order listed. Base+2 Current 2 Float-32 RO - - 0.001 Amps Base+4 Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+6 Kilo-VAs 2 Float-32 RO - - 0.001 VA Base+8 Kilo-VARs 2 Float-32 RO - - 0.001 VAR Base+10 Power Factor 2 Float-32 RO - - 0.001 Base+12 Phase Angle 2 Float-32 RO - - 0.001 Base+14 Kilowatt Hours 2 Float-32 RO - - 0.001 Kilowatt hour Base+16 Kilo-VA Hours 2 Float-32 RO - - 0.001 Kilo-VA hour Base+18 Kilo-VAR Hours 2 Float-32 RO - - 0.001 Kilo-VAR hour Base+20 Line Frequency 2 Float-32 RO - - 0.1 Hz Base+22 Present Current Demand 2 Float-32 RO - - 0.001 Amps Base+24 Maximum Current Demand 2 Float-32 RO - - 0.001 Amps Base+26 Maximum Current 2 Float-32 RO - - 0.001 Amps Base+28 Present Kilowatt Demand 2 Float-32 RO - - 0.001 Kilowatt Base+30 Average Kilowatts Demand 2 Float-32 RO - - 0.001 Kilowatt Base+32 Maximum Kilowatt Demand 2 Float-32 RO - - 0.001 Kilowatt Base+34 Maximum Total Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+36 Average Volts 2 Float-32 RO - - 0.001 Volts Base+38 Over KW Demand Alarm Setpoint 2 Uint-32 RW 0, 1-4294967295 0 Setpoint value, 0 disables alarm Base+40 Over KW Demand Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+41 Over Current Pre-Alarm Setpoint 1 Uint-16 RW 0, 50%-80% 0 Setpoint value, 0 disables alarm Base+42 Over Current Pre-Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+43 Over Current Alarm Setpoint 1 Uint-16 RW 0, 70%-100% 0 Setpoint value, 0 disables alarm Base+44 Over Current Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds SEM3TM - Embedded Micro Metering ModuleTM User Manual 137 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Single-Phase Monitor Data Registers (cont'd.) 138 Address Offsets Data Reg. Size Format Access Range Default Resolution Base+45 Active Alarms 1 Bit Field RW - 0x0000 Alarm Active bits: (write 1 to alarm bit to clear alarm) 0x0001 - Phase Loss (0 amps) Alarm bit 0x0002 - Phase Over Current Pre-Alarm bit 0x0004 - Phase Over Current Alarm bit 0x1000 Monitor Over KW Demand Alarm bit Modbus Address External Single-Phase Monitors Reg. Count 42201 Single-Phase Monitor 1 base address 46 42247 Single-Phase Monitor 2 base address 46 42293 Single-Phase Monitor 3 base address 46 42339 Single-Phase Monitor 4 base address 46 42385 Single-Phase Monitor 5 base address 46 42431 Single-Phase Monitor 6 base address 46 42477 Single-Phase Monitor 7 base address 46 42523 Single-Phase Monitor 8 base address 46 42569 Single-Phase Monitor 9 base address 46 42615 Single-Phase Monitor 10 base address 46 42661 Single-Phase Monitor 11 base address 46 42707 Single-Phase Monitor 12 base address 46 42753 Single-Phase Monitor 13 base address 46 42799 Single-Phase Monitor 14 base address 46 42845 Single-Phase Monitor 15 base address 46 42891 Single-Phase Monitor 16 base address 46 42937 Single-Phase Monitor 17 base address 46 42983 Single-Phase Monitor 18 base address 46 43029 Single-Phase Monitor 19 base address 46 43075 Single-Phase Monitor 20 base address 46 43121 Single-Phase Monitor 21 base address 46 43167 Single-Phase Monitor 22 base address 46 43213 Single-Phase Monitor 23 base address 46 43259 Single-Phase Monitor 24 base address 46 43305 Single-Phase Monitor 25 base address 46 43351 Single-Phase Monitor 26 base address 46 43397 Single-Phase Monitor 27 base address 46 43443 Single-Phase Monitor 28 base address 46 SEM3TM - Embedded Micro Metering ModuleTM User Manual Description Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Modbus Address External Single-Phase Monitors (cont'd.) Reg. Count 43489 Single-Phase Monitor 29 base address 46 43535 Single-Phase Monitor 30 base address 46 43581 Single-Phase Monitor 31 base address 46 43627 Single-Phase Monitor 32 base address 46 43673 Single-Phase Monitor 33 base address 46 43719 Single-Phase Monitor 34 base address 46 43765 Single-Phase Monitor 35 base address 46 43811 Single-Phase Monitor 36 base address 46 43857 Single-Phase Monitor 37 base address 46 43903 Single-Phase Monitor 38 base address 46 43949 Single-Phase Monitor 39 base address 46 43995 Single-Phase Monitor 40 base address 46 44041 Single-Phase Monitor 41 base address 46 44087 Single-Phase Monitor 42 base address 46 44133 Single-Phase Monitor 43 base address 46 44179 Single-Phase Monitor 44 base address 46 44225 Single-Phase Monitor 45 base address 46 44271 Single-Phase Monitor 46 base address 46 44317 Single-Phase Monitor 47 base address 46 44363 Single-Phase Monitor 48 base address 46 44409 Single-Phase Monitor 49 base address 46 44455 Single-Phase Monitor 50 base address 46 44501 Single-Phase Monitor 51 base address 46 44547 Single-Phase Monitor 52 base address 46 44593 Single-Phase Monitor 53 base address 46 44639 Single-Phase Monitor 54 base address 46 44685 Single-Phase Monitor 55 base address 46 44731 Single-Phase Monitor 56 base address 46 44777 Single-Phase Monitor 57 base address 46 44823 Single-Phase Monitor 58 base address 46 44869 Single-Phase Monitor 59 base address 46 44915 Single-Phase Monitor 60 base address 46 44961 Single-Phase Monitor 61 base address 46 45007 Single-Phase Monitor 62 base address 46 45053 Single-Phase Monitor 63 base address 46 Total Registers 2898 SEM3TM - Embedded Micro Metering ModuleTM User Manual 139 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Dual-Phase Monitor Data Registers 140 Address Offsets Data Reg. Size Format Access Range Default Resolution Description Base Volts Phase 1 2 Float-32 RO - - 0.001 Volts Each Dual Phase Monitor contains these 47 data items in the order listed. Base+2 Volts Phase 2 2 Float-32 RO - - 0.001 Volts Base+4 Current Phase 1 2 Float-32 RO - - 0.001 Amps Base+6 Current Phase 2 2 Float-32 RO - - 0.001 Amps Base+8 Kilowatts Phase 1 2 Float-32 RO - - 0.001 Kilowatt Base+10 Kilowatts Phase 2 2 Float-32 RO - - 0.001 Kilowatt Base+12 Kilo-VAs Phase 1 2 Float-32 RO - - 0.001 VA Base+14 Kilo-VAs Phase 2 2 Float-32 RO - - 0.001 VA Base+16 Kilo-VARs Phase 1 2 Float-32 RO - - 0.001 VAR Base+18 Kilo-VARs Phase 2 2 Float-32 RO - - 0.001 VAR Base+20 Power Factor Phase 1 2 Float-32 RO - - 0.001 Base+22 Power Factor Phase 2 2 Float-32 RO - - 0.001 Base+24 Phase Angle Phase 1 2 Float-32 RO - - 0.001 Base+26 Phase Angle Phase 2 2 Float-32 RO - - 0.001 Base+28 Kilowatt Hours 2 Float-32 RO - - 0.001 Kilowatt hour Base+30 Kilo-VA Hours 2 Float-32 RO - - 0.001 Kilo-VA hour Base+32 Kilo-VAR Hours 2 Float-32 RO - - 0.001 Kilo-VAR hour Base+34 Line Frequency Phase 1 2 Float-32 RO - - 0.1 Hz Base+36 Line Frequency Phase 2 2 Float-32 RO - - 0.1 Hz Base+38 Present Current Demand Phase 1 2 Float-32 RO - - 0.001 Amps Base+40 Present Current Demand Phase 2 2 Float-32 RO - - 0.001 Amps Base+42 Maximum Current Demand Phase 1 2 Float-32 RO - - 0.001 Amps Base+44 Maximum Current Demand Phase 2 2 Float-32 RO - - 0.001 Amps Base+46 Maximum Current Phase 1 2 Float-32 RO - - 0.001 Amps Base+48 Maximum Current Phase 2 2 Float-32 RO - - 0.001 Amps Base+50 Present Kilowatt Total Demand 2 Float-32 RO - - 0.001 Kilowatt Base+52 Average Kilowatts Total Demand 2 Float-32 RO - - 0.001 Kilowatt Base+54 Maximum Total Kilowatts Demand 2 Float-32 RO - - 0.001 Kilowatt Base+56 Maximum Total Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+58 Total Monitor Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+60 Total Monitor Power Factor 2 Float-32 RO - - 0.001 Base+62 Average Current of 2 phases 2 Float-32 RO - - 0.001 Amps Base+64 Average Volts 2 Float-32 RO - - 0.001 Volts Base+66 Total Monitor Current 2 Float-32 RO - - 0.001 Amps Base+68 Total Monitor Kilo-VARs 2 Float-32 RO - - 0.001 VAR SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Dual-Phase Monitor Data Registers (cont'd.) Address Offsets Reg. Size Data Format Access Range Default Resolution Base+70 Total Monitor Kilo-VAs 2 Float-32 RO - - 0.001 VA Base+72 Over KW Demand Alarm Setpoint 2 Uint-32 RW 0, 1-4294967295 0 Setpoint value, 0 disables alarm Base+74 Over KW Demand Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+75 Over Current Pre-Alarm Setpoint 1 Uint-16 RW 0, 50%-80% 0 Setpoint value, 0 disables alarm Base+76 Over Current Pre-Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+77 Over Current Alarm Setpoint 1 Uint-16 RW 0, 70%-100% 0 Setpoint value, 0 disables alarm Base+78 Over Current Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+79 Active Alarms 1 Bit Field RW - 0x0000 Alarm Active bits: (write 1 to alarm bit to clear alarm) 0x0001 - Phase 1 Loss (0 amps) Alarm bit 0x0002 - Phase 1 Over Current Pre-Alarm bit 0x0004 - Phase 1 Over Current Alarm bit 0x0010 - Phase 2 Loss (0 amps) Alarm bit 0x0020 - Phase 2 Over Current Pre-Alarm bit 0x0040 - Phase 2 Over Current Alarm bit 0x1000 Monitor Over KW Demand Alarm bit Modbus Address External Dual-Phase Monitors Reg. Count 45701 Dual-Phase Monitor 1 base address 80 45781 Dual-Phase Monitor 2 base address 80 45861 Dual-Phase Monitor 3 base address 80 45941 Dual-Phase Monitor 4 base address 80 46021 Dual-Phase Monitor 5 base address 80 46101 Dual-Phase Monitor 6 base address 80 46181 Dual-Phase Monitor 7 base address 80 46261 Dual-Phase Monitor 8 base address 80 46341 Dual-Phase Monitor 9 base address 80 46421 Dual-Phase Monitor 10 base address 80 46501 Dual-Phase Monitor 11 base address 80 46581 Dual-Phase Monitor 12 base address 80 SEM3TM - Embedded Micro Metering ModuleTM User Manual Description 141 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) 142 Modbus Address External Dual-Phase Monitors (cont'd.) Reg. Count 46661 Dual-Phase Monitor 13 base address 80 46741 Dual-Phase Monitor 14 base address 80 46821 Dual-Phase Monitor 15 base address 80 46901 Dual-Phase Monitor 16 base address 80 46981 Dual-Phase Monitor 17 base address 80 47061 Dual-Phase Monitor 18 base address 80 47141 Dual-Phase Monitor 19 base address 80 47221 Dual-Phase Monitor 20 base address 80 47301 Dual-Phase Monitor 21 base address 80 47381 Dual-Phase Monitor 22 base address 80 47461 Dual-Phase Monitor 23 base address 80 47541 Dual-Phase Monitor 24 base address 80 47621 Dual-Phase Monitor 25 base address 80 47701 Dual-Phase Monitor 26 base address 80 47781 Dual-Phase Monitor 27 base address 80 47861 Dual-Phase Monitor 28 base address 80 47941 Dual-Phase Monitor 29 base address 80 48021 Dual-Phase Monitor 30 base address 80 48101 Dual-Phase Monitor 31 base address 80 48181 Dual-Phase Monitor 32 base address 80 48261 Dual-Phase Monitor 33 base address 80 48341 Dual-Phase Monitor 34 base address 80 48421 Dual-Phase Monitor 35 base address 80 48501 Dual-Phase Monitor 36 base address 80 48581 Dual-Phase Monitor 37 base address 80 48661 Dual-Phase Monitor 38 base address 80 48741 Dual-Phase Monitor 39 base address 80 48821 Dual-Phase Monitor 40 base address 80 48901 Dual-Phase Monitor 41 base address 80 48981 Dual-Phase Monitor 42 base address 80 49061 Dual-Phase Monitor 43 base address 80 49141 Dual-Phase Monitor 44 base address 80 49221 Dual-Phase Monitor 45 base address 80 49301 Dual-Phase Monitor 46 base address 80 49381 Dual-Phase Monitor 47 base address 80 49461 Dual-Phase Monitor 48 base address 80 49541 Dual-Phase Monitor 49 base address 80 49621 Dual-Phase Monitor 50 base address 80 49701 Dual-Phase Monitor 51 base address 80 49781 Dual-Phase Monitor 52 base address 80 49861 Dual-Phase Monitor 53 base address 80 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Modbus Address External Dual-Phase Monitors (cont'd.) Reg. Count 49941 Dual-Phase Monitor 54 base address 80 50021 Dual-Phase Monitor 55 base address 80 50101 Dual-Phase Monitor 56 base address 80 50181 Dual-Phase Monitor 57 base address 80 50261 Dual-Phase Monitor 58 base address 80 50341 Dual-Phase Monitor 59 base address 80 50421 Dual-Phase Monitor 60 base address 80 50501 Dual-Phase Monitor 61 base address 80 50581 Dual-Phase Monitor 62 base address 80 Total Registers 4960 Three-Phase Monitor Data Registers Address Offsets Data Reg. Size Format Access Range Default Resolution Description Base Volts Phase 1 2 Float-32 RO - - 0.001 Volts Each Three Phase Monitor contains these 60 data items in the order listed. Base+2 Volts Phase 2 2 Float-32 RO - - 0.001 Volts Base+4 Volts Phase 3 2 Float-32 RO - - 0.001 Volts Base+6 Current Phase 1 2 Float-32 RO - - 0.001 Amps Base+8 Current Phase 2 2 Float-32 RO - - 0.001 Amps Base+10 Current Phase 3 2 Float-32 RO - - 0.001 Amps Base+12 Kilowatts Phase 1 2 Float-32 RO - - 0.001 Kilowatt Base+14 Kilowatts Phase 2 2 Float-32 RO - - 0.001 Kilowatt Base+16 Kilowatts Phase 3 2 Float-32 RO - - 0.001 Kilowatt Base+18 Kilo-VAs Phase 1 2 Float-32 RO - - 0.001 VA Base+20 Kilo-VAs Phase 2 2 Float-32 RO - - 0.001 VA Base+22 Kilo-VAs Phase 3 2 Float-32 RO - - 0.001 VA Base+24 Kilo-VARs Phase 1 2 Float-32 RO - - 0.001 VAR Base+26 Kilo-VARs Phase 2 2 Float-32 RO - - 0.001 VAR Base+28 Kilo-VARs Phase 3 2 Float-32 RO - - 0.001 VAR Base+30 Power Factor Phase 1 2 Float-32 RO - - 0.001 Base+32 Power Factor Phase 2 2 Float-32 RO - - 0.001 Base+34 Power Factor Phase 3 2 Float-32 RO - - 0.001 Base+36 Phase Angle Phase 1 2 Float-32 RO - - 0.001 Base+38 Phase Angle Phase 2 2 Float-32 RO - - 0.001 Base+40 Phase Angle Phase 3 2 Float-32 RO - - 0.001 Base+42 Kilowatt Hours 2 Float-32 RO - - 0.001 Kilowatt hour Base+44 Kilo-VA Hours 2 Float-32 RO - - 0.001 Kilo-VA hour Base+46 Kilo-VAR Hours 2 Float-32 RO - - 0.001 Kilo-VAR hour SEM3TM - Embedded Micro Metering ModuleTM User Manual 143 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Three-Phase Monitor Data Registers (cont'd.) Address Offsets 144 Reg. Size Data Format Access Range Default Resolution Base+48 Line Frequency Phase 1 2 Float-32 RO - - 0.1 Hz Base+50 Line Frequency Phase 2 2 Float-32 RO - - 0.1 Hz Base+52 Line Frequency Phase 3 2 Float-32 RO - - 0.1 Hz Base+54 Present Current Demand Phase 1 2 Float-32 RO - - 0.001 Amps Base+56 Present Current Demand Phase 2 2 Float-32 RO - - 0.001 Amps Base+58 Present Current Demand Phase 3 2 Float-32 RO - - 0.001 Amps Base+60 Maximum Current Demand Phase 1 2 Float-32 RO - - 0.001 Amps Base+62 Maximum Current Demand Phase 2 2 Float-32 RO - - 0.001 Amps Base+64 Maximum Current Demand Phase 3 2 Float-32 RO - - 0.001 Amps Base+66 Maximum Current Phase 1 2 Float-32 RO - - 0.001 Amps Base+68 Maximum Current Phase 2 2 Float-32 RO - - 0.001 Amps Base+70 Maximum Current Phase 3 2 Float-32 RO - - 0.001 Amps Base+72 Present Kilowatt Total Demand 2 Float-32 RO - - 0.001 Kilowatt Base+74 Average Kilowatts Total Demand 2 Float-32 RO - - 0.001 Kilowatt Base+76 Maximum Total Kilowatts Demand 2 Float-32 RO - - 0.001 Kilowatt Base+78 Maximum Total Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+80 Total Monitor Kilowatts 2 Float-32 RO - - 0.001 Kilowatt Base+82 Total Monitor Power Factor 2 Float-32 RO - - 0.001 Base+84 Average Current of 3 phases 2 Float-32 RO - - 0.001 Amps Base+86 Average Volts 2 Float-32 RO - - 0.001 Volts Base+88 Total Monitor Current 2 Float-32 RO - - 0.001 Amps Base+90 Total Monitor Kilo-VARs 2 Float-32 RO - - 0.001 VAR Base+92 Total Monitor Kilo-VAs 2 Float-32 RO - - 0.001 VA Base+94 Over KW Demand Alarm Setpoint 2 Uint-32 RW 0, 1-4294967295 0 Setpoint value, 0 disables alarm Base+96 Over KW Demand Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+97 Over Current Pre-Alarm Setpoint 1 Uint-16 RW 0, 50%-80% 0 Setpoint value, 0 disables alarm Base+98 Over Current Pre-Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds Base+99 Over Current Alarm Setpoint 1 Uint-16 RW 0, 70%-100% 0 Setpoint value, 0 disables alarm Base+100 Over Current Alarm Time Delay 1 Uint-16 RW 1-65535 1 sec. Alarm delay in seconds SEM3TM - Embedded Micro Metering ModuleTM User Manual Description Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Three-Phase Monitor Data Registers (cont'd.) Address Offsets Data Reg. Size Format Access Range Default Resolution Base+101 Active Alarms 1 Bit Field RW - 0x0000 Alarm Active bits: (write 1 to alarm bit to clear alarm) 0x0001 - Phase 1 Loss (0 amps) Alarm bit 0x0002 - Phase 1 Over Current Pre-Alarm bit 0x0004 - Phase 1 Over Current Alarm bit 0x0010 - Phase 2 Loss (0 amps) Alarm bit 0x0020 - Phase 2 Over Current Pre-Alarm bit 0x0040 - Phase 2 Over Current Alarm bit 0x0100 - Phase 3 Loss (0 amps) Alarm bit 0x0200 - Phase 3 Over Current Pre-Alarm bit 0x0400 - Phase 3 Over Current Alarm bit 0x1000 Monitor Over KW Demand Alarm bit Modbus Address External Three-Phase Monitors Reg. Count 51901 Three-Phase Monitor 1 base address 102 52003 Three-Phase Monitor 2 base address 102 52105 Three-Phase Monitor 3 base address 102 52207 Three-Phase Monitor 4 base address 102 52309 Three-Phase Monitor 5 base address 102 52411 Three-Phase Monitor 6 base address 102 52513 Three-Phase Monitor 7 base address 102 52615 Three-Phase Monitor 8 base address 102 52717 Three-Phase Monitor 9 base address 102 52819 Three-Phase Monitor 10 base address 102 52921 Three-Phase Monitor 11 base address 102 53023 Three-Phase Monitor 12 base address 102 53125 Three-Phase Monitor 13 base address 102 53227 Three-Phase Monitor 14 base address 102 53329 Three-Phase Monitor 15 base address 102 SEM3TM - Embedded Micro Metering ModuleTM User Manual Description 145 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) 146 Modbus Address External Three-Phase Monitors (cont'd.) Reg. Count 53431 Three-Phase Monitor 16 base address 102 53533 Three-Phase Monitor 17 base address 102 53635 Three-Phase Monitor 18 base address 102 53737 Three-Phase Monitor 19 base address 102 53839 Three-Phase Monitor 20 base address 102 53941 Three-Phase Monitor 21 base address 102 54043 Three-Phase Monitor 22 base address 102 54145 Three-Phase Monitor 23 base address 102 54247 Three-Phase Monitor 24 base address 102 54349 Three-Phase Monitor 25 base address 102 54451 Three-Phase Monitor 26 base address 102 54553 Three-Phase Monitor 27 base address 102 54655 Three-Phase Monitor 28 base address 102 54757 Three-Phase Monitor 29 base address 102 54859 Three-Phase Monitor 30 base address 102 54961 Three-Phase Monitor 31 base address 102 55063 Three-Phase Monitor 32 base address 102 55165 Three-Phase Monitor 33 base address 102 55267 Three-Phase Monitor 34 base address 102 55369 Three-Phase Monitor 35 base address 102 55471 Three-Phase Monitor 36 base address 102 55573 Three-Phase Monitor 37 base address 102 55675 Three-Phase Monitor 38 base address 102 55777 Three-Phase Monitor 39 base address 102 55879 Three-Phase Monitor 40 base address 102 55981 Three-Phase Monitor 41 base address 102 56083 Three-Phase Monitor 42 base address 102 56185 Three-Phase Monitor 43 base address 102 56287 Three-Phase Monitor 44 base address 102 56389 Three-Phase Monitor 45 base address 102 56491 Three-Phase Monitor 46 base address 102 56593 Three-Phase Monitor 47 base address 102 56695 Three-Phase Monitor 48 base address 102 56797 Three-Phase Monitor 49 base address 102 56899 Three-Phase Monitor 50 base address 102 57001 Three-Phase Monitor 51 base address 102 57103 Three-Phase Monitor 52 base address 102 57205 Three-Phase Monitor 53 base address 102 57307 Three-Phase Monitor 54 base address 102 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Modbus Address External Three-Phase Monitors (cont'd.) Reg. Count 57409 Three-Phase Monitor 55 base address 102 57511 Three-Phase Monitor 56 base address 102 57613 Three-Phase Monitor 57 base address 102 57715 Three-Phase Monitor 58 base address 102 57817 Three-Phase Monitor 59 base address 102 57919 Three-Phase Monitor 60 base address 102 58021 Three-Phase Monitor 61 base address 102 Total Registers 6222 SEM3TM - Embedded Micro Metering ModuleTM User Manual 147 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Data Registers Modbus Address External Data Reg. Size Format Access Default Description 59901 Total System Kilowatt Hours 2 Float-32 RO - Total Kilowatt Hours for the entire system 59903 Total System Kilo-VAR Hours 2 Float-32 RO - Total Kilo-VAR Hours for the entire system 59905 Pulse Input 0 Count 2 Uint-32 RO - Total number of pulses received by Pulse Input 0 59907 Pulse Input 1 Count 2 Uint-32 RO - Total number of pulses received by Pulse Input 1 59909 Global Mini-Monitor Alarm Flags 1 Bit Field RO - Alarm Active bits: (set when any Mini-Monitor sets the equivalent alarm bit) 0x0001 - Phase Loss (0 amps) Alarm bit 0x0002 - Phase Over Current Pre-Alarm bit 0x0004 - Phase Over Current Alarm bit 0x1000 - Monitor Over KW Demand Alarm bit Note: These registers are cleared by writing to the System Settings Global Resets register Total Registers 9 SEM3 System Registers 148 Modbus Address External Data Reg. Size Format Access Default Description 60001 Firmware Version 4 ASCII RO - Version number of SEM3 firmware (set in firmware) 60005 Serial Number 16 ASCII RO - SEM3 Serial Number (programmed at factory) 60021 User Text 32 ASCII RW 0x20 Area available to the user for descriptive information (default ASCII spaces) 60053 Demand SubIntervals 1 Uint-16 RW 15 Number of Demand Sub-Intervals for: - Present KW Demand - Max KW Demand - Present Current Demand - Max Current Demand 60054 Sub-Interval Length 1 Uint-16 RW 1 Length of each Demand Sub-Interval in minutes 60055 Voltage Mode 1 Enum RW 0 Type of transformer providing voltage signal 60056 System Voltage 1 Uint-16 RW 120 L-N Line to Neutral voltage 60057 Potential Transformer Primary 1 Uint-16 RW 120 Rated voltage of potential transformer primary 60058 Potential Transformer Secondary 1 Uint-16 RW 120 Rated voltage of potential transformer secondary 60059 Under Voltage Alarm Setpoint 1 Uint-16 RW 0 Setpoint value, 0 disables 60060 Under Voltage Alarm Time Delay 1 Uint-16 RW 1 Delay in seconds 60061 Over Voltage Alarm Setpoint 1 Uint-16 RW 0 Setpoint value, 0 disables 60062 Over Voltage Alarm Time Delay 1 Uint-16 RW 1 Delay in seconds SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External Data Data Format Access Default Description 60063 Voltage Alarms 1 Bit Field RW 0x0000 Voltage Alarm Bits: (write 1 to alarm bit to clear alarm) 0x0001 - Under Voltage Alarm bit 0x0002 - Over Voltage Alarm bit 60064 Global Over KW Demand Alarm Setpoint 2 Uint-32 RW 0 Global setpoint value, 0 disables (a write to this register overwrites local monitor settings) 60066 Global Over KW Demand Alarm Time Delay 1 Uint-16 RW 1 Global alarm delay in seconds (a write to this register overwrites local monitor settings) 60067 Global Phase Current Loss Alarm Enable 1 Enum RW 0 Global alarm disable/enable (a write to this register overwrites local monitor setting) 60068 Global Phase Current Loss Alarm Time Delay 1 Uint-16 RW 1 Global alarm delay in seconds (a write to this register overwrites local monitor settings) 60069 Global Phase Over Current Pre-Alarm Setpoint 1 Uint-16 RW 0 Global setpoint value, 0 disables (a write to this register overwrites local monitor settings) 60070 Global Phase Over Current Pre-Alarm Time Delay 1 Uint-16 RW 1 Global alarm delay in seconds (a write to this register overwrites local monitor settings) 60071 Global Phase Over Current Alarm Setpoint 1 Uint-16 RW 0 Global setpoint value, 0 disables (a write to this register overwrites local monitor settings) 60072 Global Phase Over Current Alarm Time Delay 1 Uint-16 RW 1 Global alarm delay in seconds (a write to this register overwrites local monitor settings) 60073 Global Resets 1 Bit Field WO 0x0000 Global Reset bits: (write 1 to reset) 0x0001 = Begin new Demand Interval 0x0002 = Reset all Demands 0x0004 = Reset all Maximum Demand values to zero 0x0008 = Reset all Energy values to zero (KWH, KVAH, KVARH) 0x0010 = Reset all Maximum Current values to zero 0x0020 = Reset all Maximum Kilowatt values to zero 0x0040 = Reset Pulse Input 1 Count to zero 0x0080 = Reset Pulse Input 2 Count to zero 0x0100 = Reset all Mini-Monitor Alarm Flags 60074 Pulse Input 1 1 Enum RW 0 0-Disabled 1-Form A 2-Form C 60075 Pulse Input 2 1 Enum RW 0 60076 Kilowatt Hour Pulse Output Mode 1 Enum RW 0 60077 Kilowatt Hour Pulse Scaling 1 Enum RW 10 1 = 1 pulse every kilowatt hour 10 = 1 pulse every 10 kilowatt hours 100 = 1 pulse every 100 kilowatt hours 1000 = 1 pulse every 1000 kilowatt hours 60078 System Time: seconds 2 Uint-32 RW 0 Seconds since Coordinated Universal Time (UTC) Epoch 60080 Single-Phase Monitor 1 Accumulate Energy enable 1 Enum RW 0 Accumulate Monitor Energy enable/disable (KWh, KVARh) SEM3TM - Embedded Micro Metering ModuleTM User Manual 149 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External 150 Data Data Format Access Default 60081 Single-Phase Monitor 2 Accumulate Energy enable 1 Enum RW 0 60082 Single-Phase Monitor 3 Accumulate Energy enable 1 Enum RW 0 60083 Single-Phase Monitor 4 Accumulate Energy enable 1 Enum RW 0 60084 Single-Phase Monitor 5 Accumulate Energy enable 1 Enum RW 0 60085 Single-Phase Monitor 6 Accumulate Energy enable 1 Enum RW 0 60086 Single-Phase Monitor 7 Accumulate Energy enable 1 Enum RW 0 60087 Single-Phase Monitor 8 Accumulate Energy enable 1 Enum RW 0 60088 Single-Phase Monitor 9 Accumulate Energy enable 1 Enum RW 0 60089 Single-Phase Monitor 10 Accumulate Energy enable 1 Enum RW 0 60090 Single-Phase Monitor 11 Accumulate Energy enable 1 Enum RW 0 60091 Single-Phase Monitor 12 Accumulate Energy enable 1 Enum RW 0 60092 Single-Phase Monitor 13 Accumulate Energy enable 1 Enum RW 0 60093 Single-Phase Monitor 14 Accumulate Energy enable 1 Enum RW 0 60094 Single-Phase Monitor 15 Accumulate Energy enable 1 Enum RW 0 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External Data Data Format Access Default 60095 Single-Phase Monitor 16 Accumulate Energy enable 1 Enum RW 0 60096 Single-Phase Monitor 17 Accumulate Energy enable 1 Enum RW 0 60097 Single-Phase Monitor 18 Accumulate Energy enable 1 Enum RW 0 60098 Single-Phase Monitor 19 Accumulate Energy enable 1 Enum RW 0 60099 Single-Phase Monitor 20 Accumulate Energy enable 1 Enum RW 0 60100 Single-Phase Monitor 21 Accumulate Energy enable 1 Enum RW 0 60101 Single-Phase Monitor 22 Accumulate Energy enable 1 Enum RW 0 60102 Single-Phase Monitor 23 Accumulate Energy enable 1 Enum RW 0 60103 Single-Phase Monitor 24 Accumulate Energy enable 1 Enum RW 0 60104 Single-Phase Monitor 25 Accumulate Energy enable 1 Enum RW 0 60105 Single-Phase Monitor 26 Accumulate Energy enable 1 Enum RW 0 60106 Single-Phase Monitor 27 Accumulate Energy enable 1 Enum RW 0 60107 Single-Phase Monitor 28 Accumulate Energy enable 1 Enum RW 0 60108 Single-Phase Monitor 29 Accumulate Energy enable 1 Enum RW 0 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual 151 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External 152 Data Data Format Access Default 60109 Single-Phase Monitor 30 Accumulate Energy enable 1 Enum RW 0 60110 Single-Phase Monitor 31 Accumulate Energy enable 1 Enum RW 0 60111 Single-Phase Monitor 32 Accumulate Energy enable 1 Enum RW 0 60112 Single-Phase Monitor 33 Accumulate Energy enable 1 Enum RW 0 60113 Single-Phase Monitor 34 Accumulate Energy enable 1 Enum RW 0 60114 Single-Phase Monitor 35 Accumulate Energy enable 1 Enum RW 0 60115 Single-Phase Monitor 36 Accumulate Energy enable 1 Enum RW 0 60116 Single-Phase Monitor 37 Accumulate Energy enable 1 Enum RW 0 60117 Single-Phase Monitor 38 Accumulate Energy enable 1 Enum RW 0 60118 Single-Phase Monitor 39 Accumulate Energy enable 1 Enum RW 0 60119 Single-Phase Monitor 40 Accumulate Energy enable 1 Enum RW 0 60120 Single-Phase Monitor 41 Accumulate Energy enable 1 Enum RW 0 60121 Single-Phase Monitor 42 Accumulate Energy enable 1 Enum RW 0 60122 Single-Phase Monitor 43 Accumulate Energy enable 1 Enum RW 0 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External Data Data Format Access Default 60123 Single-Phase Monitor 44 Accumulate Energy enable 1 Enum RW 0 60124 Single-Phase Monitor 45 Accumulate Energy enable 1 Enum RW 0 60125 Single-Phase Monitor 46 Accumulate Energy enable 1 Enum RW 0 60126 Single-Phase Monitor 47 Accumulate Energy enable 1 Enum RW 0 60127 Single-Phase Monitor 48 Accumulate Energy enable 1 Enum RW 0 60128 Single-Phase Monitor 49 Accumulate Energy enable 1 Enum RW 0 60129 Single-Phase Monitor 50 Accumulate Energy enable 1 Enum RW 0 60130 Single-Phase Monitor 51 Accumulate Energy enable 1 Enum RW 0 60131 Single-Phase Monitor 52 Accumulate Energy enable 1 Enum RW 0 60132 Single-Phase Monitor 53 Accumulate Energy enable 1 Enum RW 0 60133 Single-Phase Monitor 54 Accumulate Energy enable 1 Enum RW 0 60134 Single-Phase Monitor 55 Accumulate Energy enable 1 Enum RW 0 60135 Single-Phase Monitor 56 Accumulate Energy enable 1 Enum RW 0 60136 Single-Phase Monitor 57 Accumulate Energy enable 1 Enum RW 0 Description SEM3TM - Embedded Micro Metering ModuleTM User Manual 153 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External 154 Data Data Format Access Default 60137 Single-Phase Monitor 58 Accumulate Energy enable 1 Enum RW 0 60138 Single-Phase Monitor 59 Accumulate Energy enable 1 Enum RW 0 60139 Single-Phase Monitor 60 Accumulate Energy enable 1 Enum RW 0 60140 Single-Phase Monitor 61 Accumulate Energy enable 1 Enum RW 0 60141 Single-Phase Monitor 62 Accumulate Energy enable 1 Enum RW 0 60142 Single-Phase Monitor 63 Accumulate Energy enable 1 Enum RW 0 60143 Single-Phase Monitor 1 Breaker Rating 1 Enum RW 0 60144 Single-Phase Monitor 2 Breaker Rating 1 Enum RW 0 60145 Single-Phase Monitor 3 Breaker Rating 1 Enum RW 0 60146 Single-Phase Monitor 4 Breaker Rating 1 Enum RW 0 60147 Single-Phase Monitor 5 Breaker Rating 1 Enum RW 0 60148 Single-Phase Monitor 6 Breaker Rating 1 Enum RW 0 60149 Single-Phase Monitor 7 Breaker Rating 1 Enum RW 0 60150 Single-Phase Monitor 8 Breaker Rating 1 Enum RW 0 60151 Single-Phase Monitor 9 Breaker Rating 1 Enum RW 0 60152 Single-Phase Monitor 10 Breaker Rating 1 Enum RW 0 60153 Single-Phase Monitor 11 Breaker Rating 1 Enum RW 0 Description Breaker Rating in amps 0 indicates no Breaker installed at this location SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External Data Data Format Access Default Description 60154 Single-Phase Monitor 12 Breaker Rating 1 Enum RW 0 Breaker Rating in amps 0 indicates no Breaker installed at this location 60155 Single-Phase Monitor 13 Breaker Rating 1 Enum RW 0 60156 Single-Phase Monitor 14 Breaker Rating 1 Enum RW 0 60157 Single-Phase Monitor 15 Breaker Rating 1 Enum RW 0 60158 Single-Phase Monitor 16 Breaker Rating 1 Enum RW 0 60159 Single-Phase Monitor 17 Breaker Rating 1 Enum RW 0 60160 Single-Phase Monitor 18 Breaker Rating 1 Enum RW 0 60161 Single-Phase Monitor 19 Breaker Rating 1 Enum RW 0 60162 Single-Phase Monitor 20 Breaker Rating 1 Enum RW 0 60163 Single-Phase Monitor 21 Breaker Rating 1 Enum RW 0 60164 Single-Phase Monitor 22 Breaker Rating 1 Enum RW 0 60165 Single-Phase Monitor 23 Breaker Rating 1 Enum RW 0 60166 Single-Phase Monitor 24 Breaker Rating 1 Enum RW 0 60167 Single-Phase Monitor 25 Breaker Rating 1 Enum RW 0 60168 Single-Phase Monitor 26 Breaker Rating 1 Enum RW 0 60169 Single-Phase Monitor 27 Breaker Rating 1 Enum RW 0 60170 Single-Phase Monitor 28 Breaker Rating 1 Enum RW 0 60171 Single-Phase Monitor 29 Breaker Rating 1 Enum RW 0 SEM3TM - Embedded Micro Metering ModuleTM User Manual 155 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External 156 Data Data Format Access Default Description 60172 Single-Phase Monitor 30 Breaker Rating 1 Enum RW 0 Breaker Rating in amps 0 indicates no Breaker installed at this location 60173 Single-Phase Monitor 31 Breaker Rating 1 Enum RW 0 60174 Single-Phase Monitor 32 Breaker Rating 1 Enum RW 0 60175 Single-Phase Monitor 33 Breaker Rating 1 Enum RW 0 60176 Single-Phase Monitor 34 Breaker Rating 1 Enum RW 0 60177 Single-Phase Monitor 35 Breaker Rating 1 Enum RW 0 60178 Single-Phase Monitor 36 Breaker Rating 1 Enum RW 0 60179 Single-Phase Monitor 37 Breaker Rating 1 Enum RW 0 60180 Single-Phase Monitor 38 Breaker Rating 1 Enum RW 0 60181 Single-Phase Monitor 39 Breaker Rating 1 Enum RW 0 60182 Single-Phase Monitor 40 Breaker Rating 1 Enum RW 0 60183 Single-Phase Monitor 41 Breaker Rating 1 Enum RW 0 60184 Single-Phase Monitor 42 Breaker Rating 1 Enum RW 0 60185 Single-Phase Monitor 43 Breaker Rating 1 Enum RW 0 60186 Single-Phase Monitor 44 Breaker Rating 1 Enum RW 0 60187 Single-Phase Monitor 45 Breaker Rating 1 Enum RW 0 60188 Single-Phase Monitor 46 Breaker Rating 1 Enum RW 0 60189 Single-Phase Monitor 47 Breaker Rating 1 Enum RW 0 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 System Registers (cont'd.) Modbus Address External Data Data Format Access Default Description 60190 Single-Phase Monitor 48 Breaker Rating 1 Enum RW 0 Breaker Rating in amps 0 indicates no Breaker installed at this location 60191 Single-Phase Monitor 49 Breaker Rating 1 Enum RW 0 60192 Single-Phase Monitor 50 Breaker Rating 1 Enum RW 0 60193 Single-Phase Monitor 51 Breaker Rating 1 Enum RW 0 60194 Single-Phase Monitor 52 Breaker Rating 1 Enum RW 0 60195 Single-Phase Monitor 53 Breaker Rating 1 Enum RW 0 60196 Single-Phase Monitor 54 Breaker Rating 1 Enum RW 0 60197 Single-Phase Monitor 55 Breaker Rating 1 Enum RW 0 60198 Single-Phase Monitor 56 Breaker Rating 1 Enum RW 0 60199 Single-Phase Monitor 57 Breaker Rating 1 Enum RW 0 60200 Single-Phase Monitor 58 Breaker Rating 1 Enum RW 0 60201 Single-Phase Monitor 59 Breaker Rating 1 Enum RW 0 60202 Single-Phase Monitor 60 Breaker Rating 1 Enum RW 0 60203 Single-Phase Monitor 61 Breaker Rating 1 Enum RW 0 60204 Single-Phase Monitor 62 Breaker Rating 1 Enum RW 0 60205 Single-Phase Monitor 63 Breaker Rating 1 Enum RW 0 Total Registers 201 SEM3TM - Embedded Micro Metering ModuleTM User Manual 157 Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) SEM3 Multi-Monitor Communication Status Registers Modbus Address External 158 Data Reg. Size Format Access Default Description 60301 Monitor 1 status (bit set = communicating) Monitor 2 status (bit set = communicating) Monitor 3 status (bit set = communicating) Monitor 4 status (bit set = communicating) Monitor 5 status (bit set = communicating) Monitor 6 status (bit set = communicating) Monitor 7 status (bit set = communicating) Monitor 8 status (bit set = communicating) Monitor 9 status (bit set = communicating) Monitor 10 status (bit set = communicating) Monitor 11 status (bit set = communicating) Monitor 12 status (bit set = communicating) Monitor 13 status (bit set = communicating) Monitor 14 status (bit set = communicating) Monitor 15 status (bit set = communicating) Monitor 16 status (bit set = communicating) 1 Bit Field RO - 0x0001 - Monitor 1 installed 0x0002 - Monitor 2 installed 0x0004 - Monitor 3 installed 0x0008 - Monitor 4 installed 0x0010 - Monitor 5 installed 0x0020 - Monitor 6 installed 0x0040 - Monitor 7 installed 0x0080 - Monitor 8 installed 0x0100 - Monitor 9 installed 0x0200 - Monitor 10 installed 0x0400 - Monitor 11 installed 0x0800 - Monitor 12 installed 0x1000 - Monitor 13 installed 0x2000 - Monitor 14 installed 0x4000 - Monitor 15 installed 0x8000 - Monitor 16 installed 60302 Monitor 17 status (bit set = communicating) Monitor 18 status (bit set = communicating) Monitor 19 status (bit set = communicating) Monitor 20 status (bit set = communicating) Monitor 21 status (bit set = communicating) Monitor 22 status (bit set = communicating) Monitor 23 status (bit set = communicating) Monitor 24 status (bit set = communicating) Monitor 25 status (bit set = communicating) Monitor 26 status (bit set = communicating) Monitor 27 status (bit set = communicating) Monitor 28 status (bit set = communicating) Monitor 29 status (bit set = communicating) Monitor 30 status (bit set = communicating) Monitor 31 status (bit set = communicating) Monitor 32 status (bit set = communicating) 1 Bit Field RO - 0x0001 - Monitor 17 installed 0x0002 - Monitor 18 installed 0x0004 - Monitor 19 installed 0x0008 - Monitor 20 installed 0x0010 - Monitor 21 installed 0x0020 - Monitor 22 installed 0x0040 - Monitor 23 installed 0x0080 - Monitor 24 installed 0x0100 - Monitor 25 installed 0x0200 - Monitor 26 installed 0x0400 - Monitor 27 installed 0x0800 - Monitor 28 installed 0x1000 - Monitor 29 installed 0x2000 - Monitor 30 installed 0x4000 - Monitor 31 installed 0x8000 - Monitor 32 installed 60303 Monitor 33 status (bit set = communicating) Monitor 34 status (bit set = communicating) Monitor 35 status (bit set = communicating) Monitor 36 status (bit set = communicating) Monitor 37 status (bit set = communicating) Monitor 38 status (bit set = communicating) Monitor 39 status (bit set = communicating) Monitor 40 status (bit set = communicating) Monitor 41 status (bit set = communicating) Monitor 42 status (bit set = communicating) Monitor 43 status (bit set = communicating) Monitor 44 status (bit set = communicating) Monitor 45 status (bit set = communicating) Monitor 46 status (bit set = communicating) Monitor 47 status (bit set = communicating) Monitor 48 status (bit set = communicating) 1 Bit Field RO - 0x0001 - Monitor 33 installed 0x0002 - Monitor 34 installed 0x0004 - Monitor 35 installed 0x0008 - Monitor 36 installed 0x0010 - Monitor 37 installed 0x0020 - Monitor 38 installed 0x0040 - Monitor 39 installed 0x0080 - Monitor 40 installed 0x0100 - Monitor 41 installed 0x0200 - Monitor 42 installed 0x0400 - Monitor 43 installed 0x0800 - Monitor 44 installed 0x1000 - Monitor 45 installed 0x2000 - Monitor 46 installed 0x4000 - Monitor 47 installed 0x8000 - Monitor 48 installed 60304 Monitor 49 status (bit set = communicating) Monitor 50 status (bit set = communicating) Monitor 51 status (bit set = communicating) Monitor 52 status (bit set = communicating) Monitor 53 status (bit set = communicating) Monitor 54 status (bit set = communicating) Monitor 55 status (bit set = communicating) Monitor 56 status (bit set = communicating) Monitor 57 status (bit set = communicating) Monitor 58 status (bit set = communicating) Monitor 59 status (bit set = communicating) Monitor 60 status (bit set = communicating) Monitor 61 status (bit set = communicating) Monitor 62 status (bit set = communicating) Monitor 63 status (bit set = communicating) 1 Bit Field RO - 0x0001 - Monitor 49 installed 0x0002 - Monitor 50 installed 0x0004 - Monitor 51 installed 0x0008 - Monitor 52 installed 0x0010 - Monitor 53 installed 0x0020 - Monitor 54 installed 0x0040 - Monitor 55 installed 0x0080 - Monitor 56 installed 0x0100 - Monitor 57 installed 0x0200 - Monitor 58 installed 0x0400 - Monitor 59 installed 0x0800 - Monitor 60 installed 0x1000 - Monitor 61 installed 0x2000 - Monitor 62 installed 0x4000 - Monitor 63 installed Total Registers 4 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) SEM3 Monitor Data Registers (cont'd.) Communication Configuration Settings Registers Modbus Addres External Data Reg. Size Format Access Default Description 60401 SEM3 Modbus Address 1 Uint-16 RW 126 Modbus address used to communicate with Modbus RTU Master (RS485) 60402 SEM3 Modbus RTU Baud Rate 1 Enum RW 5=38400 Selected baud rate used to communicate with Modbus RTU Master (RS485) 60403 SEM3 Modbus RTU Parity 1 Enum RW 0=Even Selected parity used to communicate with Modbus RTU Master (RS485) 60404 Web content refresh rate 1 Uint-16 RW 30 Content refresh rate for `Real Time' web page, units in seconds. 60405 IP Mode 1 Uint-16 RW 1 IP Configuraiton mode. 60406 IP Type 1 Uint-16 RW 0 IP Type: IPV4 or IPV6 60407 IP Address Word 1 1 Uint-16 RW 192 For IPV4, one octect is stored per wor For IPV6, two octects are stored per word" 60408 IP Address Word 2 1 Uint-16 RW 168 60409 IP Address Word 3 1 Uint-16 RW 1 60410 IP Address Word 4 1 Uint-16 RW 65 60411 IP Address Word 5 1 Uint-16 RW 0 60412 IP Address Word 6 1 Uint-16 RW 0 60413 IP Address Word 7 1 Uint-16 RW 0 60414 IP Address Word 8 1 Uint-16 RW 0 60415 Subnet Mask Word 1 1 Uint-16 RW 255 60416 Subnet Mask Word 2 1 Uint-16 RW 255 60417 Subnet Mask Word 3 1 Uint-16 RW 255 60418 Subnet Mask Word 4 1 Uint-16 RW 0 60419 Subnet Mask Word 5 1 Uint-16 RW 0 60420 Subnet Mask Word 6 1 Uint-16 RW 0 60421 Subnet Mask Word 7 1 Uint-16 RW 0 60422 Subnet Mask Word 8 1 Uint-16 RW 0 60423 Gateway Word 1 1 Uint-16 RW 192 60424 Gateway Word 2 1 Uint-16 RW 168 60425 Gateway Word 3 1 Uint-16 RW 1 60426 Gateway Word 4 1 Uint-16 RW 1 60427 Gateway Word 5 1 Uint-16 RW 0 60428 Gateway Word 6 1 Uint-16 RW 0 60429 Gateway Word 7 1 Uint-16 RW 0 Gateway Word 8 1 Uint-16 RW 0 Total Registers 30 60430 For IPV4, one octect is stored per word For IPV6, two octects are stored per word For IPV4, one octect is stored per word For IPV6, two octects are stored per word SEM3TM - Embedded Micro Metering ModuleTM User Manual 159 Modbus Information (cont'd.) Double Precision Energy Registers 160 Address Offsets Data "Reg. Size" Format Access Base Kilowatt Hours 4 Float-64 RO Base+4 Kilowatt Hours Exported 4 Float-64 RO Base+8 Kilowatt Hours Inported 4 Float-64 RO Base+12 Kilo VA Hours 4 Float-64 RO Base+16 Kilo VAR Hours 4 Float-64 RO "Modbus Address External" "Modbus Address Internal" Single-Phase Mini-Monitors "Reg. Count" 424000 24000 Single-Phase Monitor 1 Energy base address 20 424020 24020 Single-Phase Monitor 2 Energy base address 20 424040 24040 Single-Phase Monitor 3 Energy base address 20 424060 24060 Single-Phase Monitor 4 Energy base address 20 424080 24080 Single-Phase Monitor 5 Energy base address 20 424100 24100 Single-Phase Monitor 6 Energy base address 20 424120 24120 Single-Phase Monitor 7 Energy base address 20 424140 24140 Single-Phase Monitor 8 Energy base address 20 424160 24160 Single-Phase Monitor 9 Energy base address 20 424180 24180 Single-Phase Monitor 10 Energy base address 20 424200 24200 Single-Phase Monitor 11 Energy base address 20 424220 24220 Single-Phase Monitor 12 Energy base address 20 424240 24240 Single-Phase Monitor 13 Energy base address 20 424260 24260 Single-Phase Monitor 14 Energy base address 20 424280 24280 Single-Phase Monitor 15 Energy base address 20 424300 24300 Single-Phase Monitor 16 Energy base address 20 424320 24320 Single-Phase Monitor 17 Energy base address 20 424340 24340 Single-Phase Monitor 18 Energy base address 20 424360 24360 Single-Phase Monitor 19 Energy base address 20 424380 24380 Single-Phase Monitor 20 Energy base address 20 424400 24400 Single-Phase Monitor 21 Energy base address 20 424420 24420 Single-Phase Monitor 22 Energy base address 20 424440 24440 Single-Phase Monitor 23 Energy base address 20 424460 24460 Single-Phase Monitor 24 Energy base address 20 424480 24480 Single-Phase Monitor 25 Energy base address 20 424500 24500 Single-Phase Monitor 26 Energy base address 20 424520 24520 Single-Phase Monitor 27 Energy base address 20 424540 24540 Single-Phase Monitor 28 Energy base address 20 424560 24560 Single-Phase Monitor 29 Energy base address 20 424580 24580 Single-Phase Monitor 30 Energy base address 20 424600 24600 Single-Phase Monitor 31 Energy base address 20 424620 24620 Single-Phase Monitor 32 Energy base address 20 424640 24640 Single-Phase Monitor 33 Energy base address 20 424660 24660 Single-Phase Monitor 34 Energy base address 20 424680 24680 Single-Phase Monitor 35 Energy base address 20 424700 24700 Single-Phase Monitor 36 Energy base address 20 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) Double Precision Energy Registers (cont'd.) "Modbus Address External" "Modbus Address Internal" Single-Phase Mini-Monitors "Reg. Count" 424720 24720 Single-Phase Monitor 37 Energy base address 20 424740 24740 Single-Phase Monitor 38 Energy base address 20 424760 24760 Single-Phase Monitor 39 Energy base address 20 424780 24780 Single-Phase Monitor 40 Energy base address 20 424800 24800 Single-Phase Monitor 41 Energy base address 20 424820 24820 Single-Phase Monitor 42 Energy base address 20 424840 24840 Single-Phase Monitor 43 Energy base address 20 424860 24860 Single-Phase Monitor 44 Energy base address 20 424880 24880 Single-Phase Monitor 45 Energy base address 20 424900 24900 Single-Phase Monitor 46 Energy base address 20 424920 24920 Single-Phase Monitor 47 Energy base address 20 424940 24940 Single-Phase Monitor 48 Energy base address 20 424960 24960 Single-Phase Monitor 49 Energy base address 20 424980 24980 Single-Phase Monitor 50 Energy base address 20 425000 25000 Single-Phase Monitor 51 Energy base address 20 425020 25020 Single-Phase Monitor 52 Energy base address 20 425040 25040 Single-Phase Monitor 53 Energy base address 20 425060 25060 Single-Phase Monitor 54 Energy base address 20 425080 25080 Single-Phase Monitor 55 Energy base address 20 425100 25100 Single-Phase Monitor 56 Energy base address 20 425120 25120 Single-Phase Monitor 57 Energy base address 20 425140 25140 Single-Phase Monitor 58 Energy base address 20 425160 25160 Single-Phase Monitor 59 Energy base address 20 425180 25180 Single-Phase Monitor 60 Energy base address 20 425200 25200 Single-Phase Monitor 61 Energy base address 20 425220 25220 Single-Phase Monitor 62 Energy base address 20 425240 25240 Single-Phase Monitor 63 Energy base address 20 425260 25260 Two Phase-Phase Monitor 1 Energy base address 20 425280 25280 Two Phase-Phase Monitor 2 Energy base address 20 425300 25300 Two Phase-Phase Monitor 3 Energy base address 20 425320 25320 Two Phase-Phase Monitor 4 Energy base address 20 425340 25340 Two Phase-Phase Monitor 5 Energy base address 20 425360 25360 Two Phase-Phase Monitor 6 Energy base address 20 425380 25380 Two Phase-Phase Monitor 7 Energy base address 20 425400 25400 Two Phase-Phase Monitor 8 Energy base address 20 425420 25420 Two Phase-Phase Monitor 9 Energy base address 20 425440 25440 Two Phase-Phase Monitor 10 Energy base address 20 425460 25460 Two Phase-Phase Monitor 11 Energy base address 20 425480 25480 Two Phase-Phase Monitor 12 Energy base address 20 425500 25500 Two Phase-Phase Monitor 13 Energy base address 20 425520 25520 Two Phase-Phase Monitor 14 Energy base address 20 425540 25540 Two Phase-Phase Monitor 15 Energy base address 20 425560 25560 Two Phase-Phase Monitor 16 Energy base address 20 SEM3TM - Embedded Micro Metering ModuleTM User Manual 161 Modbus Information (cont'd.) Double Precision Energy Registers (cont'd.) 162 "Modbus Address External" "Modbus Address Internal" Single-Phase Mini-Monitors "Reg. Count" 425580 25580 Two Phase-Phase Monitor 17 Energy base address 20 425600 25600 Two Phase-Phase Monitor 18 Energy base address 20 425620 25620 Two Phase-Phase Monitor 19 Energy base address 20 425640 25640 Two Phase-Phase Monitor 20 Energy base address 20 425660 25660 Two Phase-Phase Monitor 21 Energy base address 20 425680 25680 Two Phase-Phase Monitor 22 Energy base address 20 425700 25700 Two Phase-Phase Monitor 23 Energy base address 20 425720 25720 Two Phase-Phase Monitor 24 Energy base address 20 425740 25740 Two Phase-Phase Monitor 25 Energy base address 20 425760 25760 Two Phase-Phase Monitor 26 Energy base address 20 425780 25780 Two Phase-Phase Monitor 27 Energy base address 20 425800 25800 Two Phase-Phase Monitor 28 Energy base address 20 425820 25820 Two Phase-Phase Monitor 29 Energy base address 20 425840 25840 Two Phase-Phase Monitor 30 Energy base address 20 425860 25860 Two Phase-Phase Monitor 31 Energy base address 20 425880 25880 Two Phase-Phase Monitor 32 Energy base address 20 425900 25900 Two Phase-Phase Monitor 33 Energy base address 20 425920 25920 Two Phase-Phase Monitor 34 Energy base address 20 425940 25940 Two Phase-Phase Monitor 35 Energy base address 20 425960 25960 Two Phase-Phase Monitor 36 Energy base address 20 425980 25980 Two Phase-Phase Monitor 37 Energy base address 20 426000 26000 Two Phase-Phase Monitor 38 Energy base address 20 426020 26020 Two Phase-Phase Monitor 39 Energy base address 20 426040 26040 Two Phase-Phase Monitor 40 Energy base address 20 426060 26060 Two Phase-Phase Monitor 41 Energy base address 20 426080 26080 Two Phase-Phase Monitor 42 Energy base address 20 426100 26100 Two Phase-Phase Monitor 43 Energy base address 20 426120 26120 Two Phase-Phase Monitor 44 Energy base address 20 426140 26140 Two Phase-Phase Monitor 45 Energy base address 20 426160 26160 Two Phase-Phase Monitor 46 Energy base address 20 426180 26180 Two Phase-Phase Monitor 47 Energy base address 20 426200 26200 Two Phase-Phase Monitor 48 Energy base address 20 426220 26220 Two Phase-Phase Monitor 49 Energy base address 20 426240 26240 Two Phase-Phase Monitor 50 Energy base address 20 426260 26260 Two Phase-Phase Monitor 51 Energy base address 20 426280 26280 Two Phase-Phase Monitor 52 Energy base address 20 426300 26300 Two Phase-Phase Monitor 53 Energy base address 20 426320 26320 Two Phase-Phase Monitor 54 Energy base address 20 426340 26340 Two Phase-Phase Monitor 55 Energy base address 20 426360 26360 Two Phase-Phase Monitor 56 Energy base address 20 426380 26380 Two Phase-Phase Monitor 57 Energy base address 20 426400 26400 Two Phase-Phase Monitor 58 Energy base address 20 426420 26420 Two Phase-Phase Monitor 59 Energy base address 20 SEM3TM - Embedded Micro Metering ModuleTM User Manual Modbus Information (cont'd.) Double Precision Energy Registers (cont'd.) "Modbus Address External" "Modbus Address Internal" Single-Phase Mini-Monitors "Reg. Count" 426440 26440 Two Phase-Phase Monitor 60 Energy base address 20 426460 26460 Two Phase-Phase Monitor 61 Energy base address 20 426480 26480 Two Phase-Phase Monitor 62 Energy base address 20 426500 26500 Three Phase-Phase Monitor 1 Energy base address 20 426520 26520 Three Phase-Phase Monitor 2 Energy base address 20 426540 26540 Three Phase-Phase Monitor 3 Energy base address 20 426560 26560 Three Phase-Phase Monitor 4 Energy base address 20 426580 26580 Three Phase-Phase Monitor 5 Energy base address 20 426600 26600 Three Phase-Phase Monitor 6 Energy base address 20 426620 26620 Three Phase-Phase Monitor 7 Energy base address 20 426640 26640 Three Phase-Phase Monitor 8 Energy base address 20 426660 26660 Three Phase-Phase Monitor 9 Energy base address 20 426680 26680 Three Phase-Phase Monitor 10 Energy base address 20 426700 26700 Three Phase-Phase Monitor 11 Energy base address 20 426720 26720 Three Phase-Phase Monitor 12 Energy base address 20 426740 26740 Three Phase-Phase Monitor 13 Energy base address 20 426760 26760 Three Phase-Phase Monitor 14 Energy base address 20 426780 26780 Three Phase-Phase Monitor 15 Energy base address 20 426800 26800 Three Phase-Phase Monitor 16 Energy base address 20 426820 26820 Three Phase-Phase Monitor 17 Energy base address 20 426840 26840 Three Phase-Phase Monitor 18 Energy base address 20 426860 26860 Three Phase-Phase Monitor 19 Energy base address 20 426880 26880 Three Phase-Phase Monitor 20 Energy base address 20 426900 26900 Three Phase-Phase Monitor 21 Energy base address 20 426920 26920 Three Phase-Phase Monitor 22 Energy base address 20 426940 26940 Three Phase-Phase Monitor 23 Energy base address 20 426960 26960 Three Phase-Phase Monitor 24 Energy base address 20 426980 26980 Three Phase-Phase Monitor 25 Energy base address 20 427000 27000 Three Phase-Phase Monitor 26 Energy base address 20 427020 27020 Three Phase-Phase Monitor 27 Energy base address 20 427040 27040 Three Phase-Phase Monitor 28 Energy base address 20 427060 27060 Three Phase-Phase Monitor 29 Energy base address 20 427080 27080 Three Phase-Phase Monitor 30 Energy base address 20 427100 27100 Three Phase-Phase Monitor 31 Energy base address 20 427120 27120 Three Phase-Phase Monitor 32 Energy base address 20 427140 27140 Three Phase-Phase Monitor 33 Energy base address 20 427160 27160 Three Phase-Phase Monitor 34 Energy base address 20 427180 27180 Three Phase-Phase Monitor 35 Energy base address 20 427200 27200 Three Phase-Phase Monitor 36 Energy base address 20 427220 27220 Three Phase-Phase Monitor 37 Energy base address 20 427240 27240 Three Phase-Phase Monitor 38 Energy base address 20 427260 27260 Three Phase-Phase Monitor 39 Energy base address 20 427280 27280 Three Phase-Phase Monitor 40 Energy base address 20 SEM3TM - Embedded Micro Metering ModuleTM User Manual 163 Modbus Information (cont'd.) Double Precision Energy Registers (cont'd.) 164 "Modbus Address External" "Modbus Address Internal" Single-Phase Mini-Monitors "Reg. Count" 427300 27300 Three Phase-Phase Monitor 41 Energy base address 20 427320 27320 Three Phase-Phase Monitor 42 Energy base address 20 427340 27340 Three Phase-Phase Monitor 43 Energy base address 20 427360 27360 Three Phase-Phase Monitor 44 Energy base address 20 427380 27380 Three Phase-Phase Monitor 45 Energy base address 20 427400 27400 Three Phase-Phase Monitor 46 Energy base address 20 427420 27420 Three Phase-Phase Monitor 47 Energy base address 20 427440 27440 Three Phase-Phase Monitor 48 Energy base address 20 427460 27460 Three Phase-Phase Monitor 49 Energy base address 20 427480 27480 Three Phase-Phase Monitor 50 Energy base address 20 427500 27500 Three Phase-Phase Monitor 51 Energy base address 20 427520 27520 Three Phase-Phase Monitor 52 Energy base address 20 427540 27540 Three Phase-Phase Monitor 53 Energy base address 20 427560 27560 Three Phase-Phase Monitor 54 Energy base address 20 427580 27580 Three Phase-Phase Monitor 55 Energy base address 20 427600 27600 Three Phase-Phase Monitor 56 Energy base address 20 427620 27620 Three Phase-Phase Monitor 57 Energy base address 20 427640 27640 Three Phase-Phase Monitor 58 Energy base address 20 427660 27660 Three Phase-Phase Monitor 59 Energy base address 20 427680 27680 Three Phase-Phase Monitor 60 Energy base address 20 427700 27700 Three Phase-Phase Monitor 61 Energy base address 20 Total Registers 3720 SEM3TM - Embedded Micro Metering ModuleTM User Manual Acronyms and Abbreviations Acronyms Definitions CPU Central Processing Unit DHCP Dynamic Host Configuration Protocol kWh Kilo Watt Hours MS/TP Master-slave / token-passing NA Not applicable PLC Programmable Logic Controller RAM Random Access Memory RFC Request for Comment SEM3TM Siemens Embedded Micro Metering ModuleTM SMTP Simple Mail Transfer Protocol SNMP Simple Network Management Protocol SSL Secure Socket Layer TLS Description TCP/IP Transmission Control Protocol / Internet Protocol SEM3TM - Embedded Micro Metering ModuleTM User Manual 165 Siemens Industry, Inc. 5400 Triangle Parkway Norcross, GA 30092 1-800-241-4453 info.us@siemens.com Order No.: PDIM-SEM3U-0816 Printed in USA Subject to change without prior notice (c) 2016 Siemens Industry, Inc. Subject to changes and errors. The information given in this document only contains general descriptions and/or performance features which may not always specifically reflect those described, or which may undergo modification in the course of further development of the products. The requested performance features are binding only when they are expressly agreed upon in the concluded contract.