Product Bulletin
980/1550 nm
Filter Wavelength Division
Multiplexers
These filter multiplexers use interference filter
technology to separate or combine light at two
different wavelengths. These compact devices
provide low insertion loss and low polarization
dependent loss (PDL). The wide operational
wavelength range makes them ideal for 980 nm
pumped optical fiber amplifiers.
Key Features
Wide bandwidth
High channel isolation
Low insertion loss
Low polarization sensitivity
Stable and reliable
Applications
Low noise amplification stages
Metro erbium doped fiber amplifiers
Compliance
Telcordia 1209 and 1221
Performance 980/1550 nm (Model 1) Performance 980/1550 nm (Model 2)
Package Dimensions
5.5 mm
P
C (980+1550)
R32 or 40 mm
WAVELENGTH (nm)
900 1000 1100 13001200 1400 1500 1600
25
30
35
40
20
15
10
5
0
PASS CHANNEL
REFLECT CHANNEL
ATTENUATION (dB)
WAVELENGTH (nm)
900 1000 1100 13001200 1400 1500 1600
25
30
35
40
20
15
10
5
0
PASS CHANNEL
REFLECT CHANNEL
ATTENUATION (dB)
All information contained herein is believed to be accurate and is subject to change without notice. No responsibility is assumed for
its use. JDS Uniphase Corporation, its subsidiaries and affiliates, or manufacturer, reserve the right to make changes, without notice, to
product design, product components, and product manufacturing methods. Some specific combinations of options may not be
available. Please contact JDS Uniphase for more information. ©JDS Uniphase Corporation. All rights reserved.
10113905
U.S. and Canada Toll Free: 877-550-JDSU
www.jdsuniphase.com
FWDM 980 | 2
Specifications
Parameter Pass 980 nm/Reflect 1550 nm Pass 1550 nm/Reflect 980 nm
Pass port (CP) wavelength range λP950 to 1010 nm 1500 to 1600 nm
Pass port (CP) insertion loss Typical 0.6 dB 0.6 dB
Maximum 0.8 dB 0.8 dB
Pass port (CP) flatness Maximum 0.3 dB 0.3 dB
Pass port (CP) isolation at λRMinimum 30 dB 30 dB
Reflect port (CR) wavelength range λR1500 to 1600 nm 950 to 1010 nm
Reflect port (CR) insertion loss Typical 0.3 dB 0.3 dB
Maximum 0.5 dB 0.5 dB
Reflect port (CR) flatness Maximum 0.1 dB 0.1 dB
Reflect port (CR) isolation at λPMinimum 20 dB 20 dB
Directivity Minimum 60 dB 60 dB
Optical return loss Minimum 50 dB 50 dB
Polarization dependent loss Maximum 0.04 dB 0.04 dB
Polarization mode dispersion Maximum 0.1 ps 0.1 ps
Thermal stability Maximum 0.005 dB/°C 0.005 dB/°C
Optical power Maximum 250 mW 250 mW
Tensile load Maximum 5 N 5 N
Operating temperature 0 to 70 °C 0 to 70 °C
Storage temperature -40 to 85 °C -40 to 85 °C
Ordering Information
Indicate your requirements by selecting one option from each configuration table. Please print the corresponding codes in
the available boxes to form your part number. For more information on this or other products and their availability, please
contact your JDS Uniphase account manager, or call 1-877-550-JDSU toll free in the U.S. and Canada, or visit
www.jdsuniphase.com.
Sample: FWDMC01111111
PureMode and SMF-28 are registered trademarks of Corning Incorporated.
ST is a registered trademark of Lucent Technologies.
Telcordia is a trademark of Telcordia Technologies, Inc.
C
Code Connector2
0 No connector1
1 FC/PC
2 FC/SPC
3 FC/APC
4 SC/SPC
5 SC/APC
7D4
8ST
9 FC/UPC
A SC/UPC
Code Fiber Length
1 1 meter1
2 2 meters
3 3 meters
4 0.5 meters
5 1.5 meters
6 2.5 meters
Code Package
1 5.5 (D) x 32 (L) mm
250 µm fiber1
3 5.5 (D) x 40 (L) mm
900 µm loose tube
Code Wavelength
C 980/1550 nm
FWDM 0
Code Model
1 Pass 980/reflect 1550
2 Pass 1550/reflect 980
Code Fiber Type - Port P
1 Corning SMF-281
A Corning PureMode
HI-1060 (for 980 nm ports)
Code Fiber Type - Port C
1 Corning SMF-281
A Corning PureMode
HI-1060 (for 980 nm ports)
Code Fiber Type - Port R
1 Corning SMF-281
A Corning PureMode
HI-1060 (for 980 nm ports)
1. Standard.
2. Insertion loss and return loss depend on
connector type.