62-11
GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912
© 2012 Glenair, Inc. Printed in U.S.A.CAGE Codes 06324
www.glenair.com E-Mail: sales@glenair.com
62
Strain Reliefs
AS85049/38
Straight Strain Relief
Self-Locking or Non-Self-Locking
A Thread
E
Self-Locking Only
F
Self-Locking
Only
H
Cable
Entry
Note: Screw orientation shown is for
non-self-locking configuration. Screws
on self-locking configurations are on
the same side/face of the clamp.
CONNECTOR DESIGNATOR:
HMIL-DTL-38999 Series III & IV
APPLICATION NOTES
1. Assembly to be identied with manufacturer’s name and part number, space permitting.
2. Cable Entry is dened as the accommodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
3. For complete dimensions, see the applicable Military Specication.
4. Metric dimensions (mm) are in parentheses.
Basic
Part Number
M85049/38 S 11 W
Shell Size
Material and Finish Designator
A = Aluminum, Black Anodize
N = Aluminum, Electroless Nickel
S = 300 Series Steel, Passivated
W = Aluminum, 500 Hour Cadmium
Olive Drab over Electroless Nickel
S = Self-Locking
Use Dash for Non-Self-Locking
N = Non-Detented
TABLE I: Shell Size, Cable Entry and Backshell Dimensions
Shell
Size
Shell Size
Ref.
A Thread
Class 2B
Ø E Max
Self-Locking Only
F Max
Self-Locking Only
H
Max
Cable Entry
Min Max
9 A M12 X 1 - 6H .858 (21.8) .91 (23.1) .85 (21.6) .098 (2.5) .234 (5.9)
11 B M15 X 1 - 6H .984 (25.0) .91 (23.1) .90 (22.9) .153 (3.9) .234 (5.9)
13 C M18 X 1 - 6H 1.157 (29.4) 1.01 (25.7) 1.10 (27.9) .190 (4.8) .328 (8.3)
15 D M22 X 1 - 6H 1.279 (32.5) 1.06 (26.9) 1.15 (29.2) .260 (6.6) .457 (11.6)
17 E M25 X 1 - 6H 1.406 (35.7) 1.16 (29.5) 1.30 (33.0) .283 (7.2) .614 (15.6)
19 F M28 X 1 - 6H 1.516 (38.5) 1.41 (35.8) 1.50 (38.1) .325 (8.3) .634 (16.1)
21 G M31 X 1 - 6H 1.642 (41.7) 1.51 (38.4) 1.60 (40.6) .343 (8.7) .698 (17.7)
23 H M34 X 1 - 6H 1.768 (44.9) 1.66 (42.2) 1.70 (43.2) .381 (9.7) .823 (20.9)
25 J M37 X 1 - 6H 1.889 (48.0) 2.76 (44.7) 1.80 (45.7) .418 (10.6) .853 (21.7)
FOR NEW DESIGN
USE AS85049/124
