TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 77 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Surface Mount Capacitors
TANTAMOUNT® Molded Case, High Performance
FEATURES
• Terminations: 100 % matte tin, standard,
tin/lead available
• Molded case available in five case codes
• Compatible with “High Volume” automatic
pick and place equipment
• High ripple current carrying capability
•Low ESR
• Meets EIA 535BAAC
• Compliant terminations
• 100 % surge current tested (B, C, D, and E case sizes)
• Mounting: Surface mount
• AEC-Q200 qualified
• Compliant to RoHS Directive 2011/65/EU
• Moisture sensitivity level 1
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE/ELECTRICAL CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 125 °C
(above 85 °C, voltage derating is required)
Capacitance Range: 0.10 μF to 470 μF
Capacitance Tolerance: ± 10 %, ± 20 %
Voltage Rating: 4 VDC to 50 VDC
Note
• We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
Voltage substitutions will be marked with the higher voltage rating.
ORDERING INFORMATION
TP3 D 226 K 035 C 0500 AS
TYPE CASE CODE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
TERMINATION/
PACKAGING
ESR SPECIFICATION
OPTION
See Ratings
and Case
Codes table.
This is expressed
in picofarads.
The first two
digits are the
significant
figures. The third
is the number of
zeros to follow.
K = ± 10 %
M = ± 20 %
This is expressed in V.
To complete the
three-digit block,
zeros precede the
voltage rating. A
decimal point is
indicated by an “R”
(6R3 = 6.3 V)
C = Matte tin/7"
(178 mm) reels
D = Matte tin/13"
(330 mm) reels
E = Tin/lead/7"
(178 mm) reels
F = Tin/lead/13"
(330 mm) reels
Maximum
100 kHz ESR
0500 = 500 m
5000 = 5.0
10R0 = 10.0
AS = Standard
DIMENSIONS in inches [millimeters]
CASE CODE EIA SIZE L W H P TWTH (MIN.)
A 3216-18
0.126 ± 0.008
[3.2 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.063 ± 0.008
[1.6 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.047 ± 0.004
[1.2 ± 0.10]
0.028
[0.70]
B 3528-21
0.138 ± 0.008
[3.5 ± 0.20]
0.110 ± 0.008
[2.8 ± 0.20]
0.075 ± 0.008
[1.9 ± 0.20]
0.031 ± 0.012
[0.80 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.028
[0.70]
C 6032-28
0.236 ± 0.012
[6.0 ± 0.30]
0.126 ± 0.012
[3.2 ± 0.30]
0.098 ± 0.012
[2.5 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.087 ± 0.004
[2.2 ± 0.10]
0.039
[1.0]
D 7343-31
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.110 ± 0.012
[2.8 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
E 7343-43
0.287 ± 0.012
[7.3 ± 0.30]
0.169 ± 0.012
[4.3 ± 0.30]
0.157 ± 0.012
[4.0 ± 0.30]
0.051 ± 0.012
[1.3 ± 0.30]
0.094 ± 0.004
[2.4 ± 0.10]
0.039
[1.0]
L
TH (MIN.)
H
WTW
P
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 78 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• ESR limits in shown in parenthesis
RATINGS AND CASE CODES
μF 4 V 6.3 V 10 V 16 V 20 V 25 V 35 V 50 V
0.10 A (20.00,
10.00)
A (19.00,
10.00)
0.15
0.22 A (15.00, 6.00) A (15.00)
B (12.00, 8.50)
0.33 A (13.00, 6.00) B (10.00, 4.50)
0.47 A (12.00,
9.00)
A (10.00, 4.00)
B (8.00, 2.50) B (8.40, 4.00)
0.68 A (10.00, 8.00) A (8.40)
B (7.00, 5.00)
A (7.60, 4.00)
B (6.50, 2.50)
1.0 A (9.30, 6.00) A (8.40, 5.50) A (7.60, 4.00)
B (5.00, 2.00)
A (7.50, 6.00,
4.00)
B (5.00, 2.00)
B (6.70)
C (4.60, 1.60)
1.5 A (8.00, 6.00) A (6.70, 6.00) A (6.30) A (6.70, 4.00)
B (4.60, 2.00)
B (4.20, 2.00)
C (3.80)
2.2 A (7.60, 6.00) A (6.30) A (5.90, 4.00)
B (4.60, 2.50)
A (5.90, 4.00)
B (3.50, 1.50)
A (6.30, 4.00)
B (4.00; 3.80,
1.50)
C (2.20)
B (3.80, 2.00)
C (2.90, 0.90)
C (2.90, 1.50)
D (2.10, 0.80)
3.3 A (6.30, 5.00) A (5.50) A (5.00, 4.00, 3.50)
B (3.5, 2.0)
A (5.90, 4.00)
B (3.00, 1.30)
B (3.10, 1.50)
C (2.30, 1.00)
B (3.50)
C (2.10, 0.70)
C (2.50, 1.50)
D (1.70, 0.80)
4.7 A (6.30) A (5.50, 3.50)
A (5.00, 4.50,
3.00, 2.00)
B (3.40, 1.50)
A (5.00, 2.50, 2.00)
B (2.90, 1.50)
A (5.00, 3.50)
B (2.90, 1.00)
C (2.30, 0.60)
B (2.80, 1.50)
C (2.00,
0.525)
B (3.10, 1.50)
C (1.90, 0.50)
D (1.30, 0.45)
D (1.20, 0.60,
0.30)
6.8 A (5.00)
B (3.40)
A (4.20, 3.00)
B (2.90, 1.20)
A (4.20, 3.80, 3.00)
B (2.50)
C (1.90, 0.60)
B (2.50, 1.00)
C (1.90, 0.55) C (1.70, 0.50)
C (1.80, 0.475)
D (1.8, 1.10,
0.30)
D (0.90, 0.60)
10 A (3.40, 2.00, 1.50)
B (2.90, 1.00)
A (3.40, 2.00)
B (2.50, 0.60, 0.80)
C (1.80, 0.55)
A (3.00, 1.70)
B (2.00, 0.80)
C (1.80, 0.45)
B (2.10, 2.5, 1.00)
C (1.70, 0.50,
0.45)
C (1.50, 0.45)
D (1.00, 0.30)
C (1.60, 0.45)
D (0.80, 0.30,
0.135)
D (0.80, 0.55)
E (0.80, 0.55,
0.30)
15 A (2.90, 2.00)
B (2.50)
A (2.90, 2.00)
B (2.00, 1.20, 0.70)
C (1.80, 0.50)
B (2.00, 0.80)
C (1.50, 0.40)
B (2.30, 1.00)
C (1.50, 0.40)
D (0.90, 0.30)
C (1.20,
0.425)
D (0.80, 0.25)
D (0.70, 0.30,
0.26)
22
A (2.90, 2.00)
B (2.00, 0.60)
C (1.80, 0.50)
A (2.50, 1.50)
B (1.90, 0.60, 0.70)
C (1.50, 0.40, 0.345,
0.245)
B (1.90, 0.70.
0.60)
C (1.40, 0.8,
0.375, 0.35)
D (0.80, 0.25)
C (1.10, 0.375)
D (0.70, 0.225)
C (1.20, 0.40)
D (0.70, 0.20)
D (0.60, 0.30,
0.20)
E (0.60, 0.275)
33
B (2.00)
C (2.0, 1.80,
0.50)
A (2.50, 0.80)
B (1.90, 0.60)
C (1.50, 0.375)
B (1.90, 1.50, 0.60)
C (1.40, 0.60, 0.30)
D (0.80, 0.25)
C (1.10, 0.30)
D (0.70, 0.225)
C (1.00, 0.35)
D (0.70, 0.20)
47
B (1.90, 0.60,
0.55, 0.50)
C (1.40, 0.30, 0.25)
D (0.80, 0.20)
B (1.80, 0.60)
C (1.10, 0.30)
D (0.70, 0.20)
C (1.00, 0.30)
D (0.70, 0.20,
0.15, 0.12)
D (0.70, 0.25,
0.20, 0.15)
E (0.60, 0.15)
E (0.60, 0.20)
68 B (1.4)
C (1.4)
B (1.80, 0.55)
C (0.80, 0.275)
D (0.70, 0.20)
C (1.00, 0.275)
D (0.70, 0.15) D (0.60, 0.15)
100
B (0.9, 1.7)
C (0.80, 0.25)
D (0.70, 0.13,
0.15, 0.14)
C (0.90, 0.25, 0.20)
D (0.60, 0.10, 0.15)
D (0.60, 0.15,
0.125)
E (0.60, 0.10)
E (0.50, 0.15)
150 D (0.60, 0.15) D (0.60, 0.10)
E (0.50, 0.10) E (0.50, 0.10)
220 D (0.60, 0.10)
E (0.50, 0.10)
D (0.60, 0.125)
E (0.50, 0.10) E (0.50, 0.10)
330 D (0.60, 0.125)
E (0.50, 0.10)
470 E (0.50, 0.10)
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 79 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MARKING
“A” CASE VOLTAGE CODE
VOLTS CODE
4.0 G
6.3 J
10 A
16 C
20 D
25 E
35 V
50 T
Marking
Capacitor marking includes an anode (+) polarity band, capacitance in microfarads and the voltage rating. “A” Case capacitors use a letter
code for the voltage and EIA capacitance code.
The Vishay Sprague® trademark is included if space permits. Capacitors rated at 6.3 V are marked 6 V.
A manufacturing date code is marked on all capacitors.
Call the factory for further explanation.
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
4 VDC AT + 85 °C; 2.7 VDC AT + 125 °C
4.7 A TP3A475(1)004(2)6300AS 0.5 6 6.300 0.11
33 B TP3B336(1)004(2)2000AS 1.3 6 2.000 0.21
33 C TP3C336(1)004(2)2000AS 1.3 6 2.000 0.25
33 C TP3C336(1)004(2)1800AS 1.3 6 1.800 0.25
33 C TP3C336(1)004(2)0500AS 1.3 6 0.500 0.47
68 B TP3B686(1)004(2)1400AS 2.7 6 1.400 0.28
68 C TP3C686(1)004(2)1400AS 2.7 6 1.400 0.28
6.3 VDC AT + 85 °C; 4 VDC AT + 125 °C
2.2 A TP3A225(1)6R3(2)7600AS 0.5 6 7.600 0.10
2.2 A TP3A225(1)6R3(2)6000AS 0.5 6 6.000 0.11
3.3 A TP3A335(1)6R3(2)6300AS 0.5 6 6.300 0.11
3.3 A TP3A335(1)6R3(2)5000AS 0.5 6 5.000 0.12
4.7 A TP3A475(1)6R3(2)5500AS 0.5 6 5.500 0.12
4.7 A TP3A475(1)6R3(2)3500AS 0.5 6 3.500 0.15
6.8 A TP3A685(1)6R3(2)5000AS 0.5 6 5.000 0.12
6.8 B TP3B685(1)6R3(2)3400AS 0.5 6 3.400 0.16
10 A TP3A106(1)6R3(2)3400AS 0.6 6 3.400 0.15
10 A TP3A106(1)6R3(2)2000AS 0.6 6 2.000 0.19
10 A TP3A106(1)6R3(2)1500AS 0.6 6 1.500 0.22
10 B TP3B106(1)6R3(2)2900AS 0.6 6 2.900 0.17
10 B TP3B106(1)6R3(2)1000AS 0.6 6 1.000 0.29
15 A TP3A156(1)6R3(2)2900AS 0.9 6 2.900 0.16
15 A TP3A156(1)6R3(2)2000AS 0.9 6 2.000 0.19
15 B TP3B156(1)6R3(2)2500AS 0.9 6 2.500 0.18
22 A TP3A226(1)6R3(2)2900AS 1.3 6 2.900 0.16
22 A TP3A226(1)6R3(2)2000AS 1.3 6 2.000 0.19
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
Capacitance
Code, pF
Indicates
High Performance
Polarity Band (+)
Voltage
Code
V104P
A Case
Date Code
Vishay
Sprague Logo
Indicates
High Performance
Voltage
Capacitance
μF
Polarity
Band (+)
22 P10
XX 2
B, C, D, E Cases
2.8 6 0.500 0.41
47 C TP3C476(1)6R3(2)1400AS 2.8 6 1.400 0.28
47 C TP3C476(1)6R3(2)0300AS 2.8 6 0.300 0.61
47 C TP3C476(1)6R3(2)0250AS 2.1 6 0.250 0.66
47 D TP3D476(1)6R3(2)0800AS 2.8 6 0.800 0.43
47 D TP3D476(1)6R3(2)0200AS 2.8 6 0.200 0.87
68 B TP3B686(1)6R3(2)1800AS 4.1 6 1.800 0.22
68 B TP3B686(1)6R3(2)0550AS 4.1 6 0.550 0.39
68 C TP3C686(1)6R3(2)0800AS 4.1 6 0.800 0.37
68 C TP3C686(1)6R3(2)0275AS 4.1 6 0.275 0.63
68 D TP3D686(1)6R3(2)0700AS 4.1 6 0.700 0.46
68 D TP3D686(1)6R3(2)0200AS 4.1 6 0.200 0.87
100 B TP3B107(1)6R3(2)0900AS 6.0 10 0.900 0.22
100 B TP3B107(1)6R3(2)1700AS 6.0 10 1.700 0.22
100 C TP3C107(1)6R3(2)0800AS 6.0 6 0.800 0.37
100 C TP3C107(1)6R3(2)0250AS 6.0 6 0.250 0.66
100 D TP3D107(1)6R3(2)0700AS 6.0 6 0.700 0.46
100 D TP3D107(1)6R3(2)0150AS 6.0 6 0.150 1.00
100 D TP3D107(1)6R3(2)0140AS 6.0 6 0.140 1.04
100 D TP3D107(1)6R3(2)0130AS 6.0 6 0.130 1.07
150 D TP3D157(1)6R3(2)0600AS 9.0 8 0.600 0.60
150 D TP3D157(1)6R3(2)0150AS 9.0 8 0.150 1.10
220 D TP3D227(1)6R3(2)0600AS 13.2 8 0.600 0.50
220 D TP3D227(1)6R3(2)0100AS 13.2 8 0.100 1.22
220 E TP3E227(1)6R3(2)0500AS 13.2 8 0.500 0.57
220 E TP3E227(1)6R3(2)0100AS 13.2 8 0.100 1.28
330 D TP3D337(1)6R3(2)0600AS 19.8 8 0.600 0.50
330 D TP3D337(1)6R3(2)0125AS 19.8 8 0.125 1.10
330 E TP3E337(1)6R3(2)0500AS 19.8 8 0.500 0.57
330 E TP3E337(1)6R3(2)0100AS 19.8 8 0.100 1.28
470 E TP3E477(1)6R3(2)0500AS 28.2 10 0.500 0.57
470 E TP3E477(1)6R3(2)0100AS 28.2 10 0.100 1.28
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 81 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
1.5 A TP3A155(1)010(2)8000AS 0.5 6 8.000 0.10
1.5 A TP3A155(1)010(2)6000AS 0.5 6 6.000 0.11
2.2 A TP3A225(1)010(2)6300AS 0.5 6 6.300 0.11
3.3 A TP3A335(1)010(2)5500AS 0.5 6 5.500 0.12
4.7 A TP3A475(1)010(2)2000AS 0.5 6 2.000 0.19
4.7 A TP3A475(1)010(2)5000AS 0.5 6 5.000 0.12
4.7 A TP3A475(1)010(2)4500AS 0.5 6 4.500 0.13
4.7 A TP3A475(1)010(2)3000AS 0.5 6 3.000 0.16
4.7 B TP3B475(1)010(2)3400AS 0.5 6 3.400 0.16
4.7 B TP3B475(1)010(2)1500AS 0.5 6 1.500 0.24
6.8 A TP3A685(1)010(2)4200AS 0.7 6 4.200 0.13
6.8 A TP3A685(1)010(2)3000AS 0.7 6 3.000 0.16
6.8 B TP3B685(1)010(2)2900AS 0.7 6 2.900 0.17
6.8 B TP3B685(1)010(2)1200AS 0.7 6 1.200 0.27
10 A TP3A106(1)010(2)3400AS 1.0 6 3.400 0.15
10 A TP3A106(1)010(2)2000AS 1.0 6 2.000 0.19
10 B TP3B106(1)010(2)2500AS 1.0 6 2.500 0.18
10 B TP3B106(1)010(2)0800AS 1.0 6 0.800 0.33
10 B TP3B106(1)010(2)0600AS 1.0 6 0.600 0.38
10 C TP3C106(1)010(2)1800AS 1.0 6 1.800 0.25
10 C TP3C106(1)010(2)0550AS 1.0 6 0.550 0.45
15 A TP3A156(1)010(2)2900AS 1.5 6 2.900 0.16
15 A TP3A156(1)010(2)2000AS 1.5 6 2.000 0.19
15 B TP3B156(1)010(2)2000AS 1.5 6 2.000 0.21
15 B TP3B156(1)010(2)1200AS 1.5 6 1.200 0.27
15 B TP3B156(1)010(2)0700AS 1.5 6 0.700 0.35
15 C TP3C156(1)010(2)1800AS 1.5 6 1.800 0.25
15 C TP3C156(1)010(2)0500AS 1.5 6 0.500 0.47
22 A TP3A226(1)010(2)2500AS 2.2 8 2.500 0.17
22 A TP3A226(1)010(2)1500AS 2.2 8 1.500 0.22
22 B TP3B226(1)010(2)1900AS 2.2 6 1.900 0.21
22 B TP3B226(1)010(2)0700AS 2.2 6 0.700 0.35
22 B TP3B226(1)010(2)0600AS 2.2 6 0.600 0.38
22 C TP3C226(1)010(2)1500AS 2.2 6 1.500 0.27
22 C TP3C226(1)010(2)0400AS 2.2 6 0.400 0.52
22 C TP3C226(1)010(2)0345AS 2.2 6 0.345 0.56
22 C TP3C226(1)010(2)0245AS 2.2 6 0.245 0.67
33 B TP3B336(1)010(2)1900AS 3.3 6 1.900 0.21
33 B TP3B336(1)010(2)1500AS 3.3 6 1.500 0.24
33 B TP3B336(1)010(2)0600AS 3.3 6 0.600 0.38
33 C TP3C336(1)010(2)1400AS 3.3 6 1.400 0.28
33 C TP3C336(1)010(2)0600AS 3.3 6 0.600 0.28
33 C TP3C336(1)010(2)0300AS 3.3 6 0.300 0.61
33 D TP3D336(1)010(2)0800AS 3.3 6 0.800 0.43
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 82 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C; 7 VDC AT 125 °C
33 D TP3D336(1)010(2)0250AS 3.3 6 0.250 0.77
47 B TP3B476(1)010(2)1800AS 4.7 6 1.800 0.22
47 B TP3B476(1)010(2)0600AS 4.7 6 0.600 0.38
47 C TP3C476(1)010(2)1100AS 4.7 6 1.100 0.32
47 C TP3C476(1)010(2)0300AS 4.7 6 0.300 0.61
47 D TP3D476(1)010(2)0700AS 4.7 6 0.700 0.46
47 D TP3D476(1)010(2)0200AS 4.7 6 0.200 0.87
68 C TP3C686(1)010(2)1000AS 6.8 6 1.000 0.33
68 C TP3C686(1)010(2)0275AS 6.8 6 0.275 0.63
68 D TP3D686(1)010(2)0700AS 6.8 6 0.700 0.46
68 D TP3D686(1)010(2)0150AS 6.8 6 0.150 1.00
100 C TP3C107(1)010(2)0900AS 10.0 8 0.900 0.35
100 C TP3C107(1)010(2)0250AS 10.0 8 0.250 0.66
100 C TP3C107(1)010(2)0200AS 10.0 8 0.200 0.74
100 D TP3D107(1)010(2)0600AS 10.0 8 0.600 0.50
100 D TP3D107(1)010(2)0150AS 10.0 8 0.150 1.00
100 D TP3D107(1)010(2)0100AS 10.0 8 0.100 1.22
150 D TP3D157(1)010(2)0600AS 15.0 8 0.600 0.50
150 D TP3D157(1)010(2)0100AS 15.0 8 0.100 1.22
150 E TP3E157(1)010(2)0500AS 15.0 8 0.500 0.57
150 E TP3E157(1)010(2)0100AS 15.0 8 0.100 1.28
220 D TP3D227(1)010(2)0600AS 22.0 8 0.600 0.50
220 D TP3D227(1)010(2)0125AS 22.0 8 0.125 1.10
220 E TP3E227(1)010(2)0500AS 22.0 8 0.500 0.57
220 E TP3E227(1)010(2)0100AS 22.0 8 0.100 1.28
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
1.0 A TP3A105(1)016(2)9300AS 0.5 4 9.300 0.09
1.0 A TP3A105(1)016(2)6000AS 0.5 4 6.000 0.11
1.5 A TP3A155(1)016(2)6700AS 0.5 6 6.700 0.11
1.5 A TP3A155(1)016(2)6000AS 0.5 6 6.000 0.11
2.2 A TP3A225(1)016(2)5900AS 0.5 6 5.900 0.11
2.2 A TP3A225(1)016(2)4000AS 0.5 6 4.000 0.14
2.2 B TP3B225(1)016(2)4600AS 0.5 6 4.600 0.14
2.2 B TP3B225(1)016(2)2500AS 0.5 6 2.500 0.18
3.3 A TP3A335(1)016(2)5000AS 0.5 6 5.000 0.12
3.3 A TP3A335(1)016(2)4000AS 0.5 6 4.000 0.14
3.3 A TP3A335(1)016(2)3500AS 0.5 6 3.500 0.15
3.3 B TP3B335(1)016(2)3500AS 0.5 6 3.500 0.16
3.3 B TP3B335(1)016(2)2000AS 0.5 6 2.000 0.21
4.7 A TP3A475(1)016(2)5000AS 0.8 6 5.000 0.12
4.7 A TP3A475(1)016(2)2500AS 0.8 6 2.500 0.17
4.7 A TP3A475(1)016(2)2000AS 0.8 6 2.000 0.19
4.7 B TP3B475(1)016(2)2900AS 0.8 6 2.900 0.17
4.7 B TP3B475(1)016(2)1500AS 0.8 6 1.500 0.24
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 83 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
16 VDC AT + 85 °C; 10 VDC AT + 125 °C
6.8 A TP3A685(1)016(2)4200AS 1.1 6 4.200 0.13
6.8 A TP3A685(1)016(2)3800AS 1.1 6 3.800 0.14
6.8 A TP3A685(1)016(2)3000AS 1.1 6 3.000 0.16
6.8 B TP3B685(1)016(2)2500AS 1.1 6 2.500 0.18
6.8 C TP3C685(1)016(2)1900AS 1.1 6 1.900 0.24
6.8 C TP3C685(1)016(2)0600AS 1.1 6 0.600 0.43
10 A TP3A106(1)016(2)3000AS 1.6 6 3.000 0.16
10 A TP3A106(1)016(2)1700AS 1.6 6 1.700 0.21
10 B TP3B106(1)016(2)2000AS 1.6 6 2.000 0.21
10 B TP3B106(1)016(2)0800AS 1.6 6 0.800 0.33
10 C TP3C106(1)016(2)1800AS 1.6 6 1.800 0.25
10 C TP3C106(1)016(2)0450AS 1.6 6 0.450 0.49
15 B TP3B156(1)016(2)2000AS 2.4 6 2.000 0.21
15 B TP3B156(1)016(2)0800AS 2.4 6 0.800 0.33
15 C TP3C156(1)016(2)1500AS 2.4 6 1.500 0.27
15 C TP3C156(1)016(2)0400AS 2.4 6 0.400 0.52
22 B TP3B226(1)016(2)1900AS 3.5 6 1.900 0.21
22 B TP3B226(1)016(2)0700AS 3.5 6 0.700 0.35
22 B TP3B226(1)016(2)0600AS 3.5 6 0.600 0.38
22 C TP3C226(1)016(2)1400AS 3.5 6 1.400 0.28
22 C TP3C226(1)016(2)0800AS 3.5 6 0.800 0.28
22 C TP3C226(1)016(2)0375AS 3.5 6 0.375 0.54
22 C TP3C226(1)016(2)0350AS 3.5 6 0.350 0.56
22 D TP3D226(1)016(2)0800AS 3.5 6 0.800 0.43
22 D TP3D226(1)016(2)0250AS 3.5 6 0.250 0.77
33 C TP3C336(1)016(2)1100AS 5.3 6 1.100 0.32
33 C TP3C336(1)016(2)0300AS 5.3 6 0.300 0.61
33 D TP3D336(1)016(2)0700AS 5.3 6 0.700 0.46
33 D TP3D336(1)016(2)0225AS 5.3 6 0.225 0.82
47 C TP3C476(1)016(2)1000AS 7.5 6 1.000 0.33
47 C TP3C476(1)016(2)0300AS 7.5 6 0.300 0.61
47 D TP3D476(1)016(2)0700AS 7.5 6 0.700 0.46
47 D TP3D476(1)016(2)0200AS 7.5 6 0.200 0.87
47 D TP3D476(1)016(2)0150AS 7.5 6 0.150 1.00
47 D TP3D476(1)016(2)0120AS 7.5 6 0.120 1.12
68 D TP3D686(1)016(2)0600AS 10.9 6 0.600 0.50
68 D TP3D686(1)016(2)0150AS 10.9 6 0.150 1.00
100 D TP3D107(1)016(2)0600AS 16.0 8 0.600 0.50
100 D TP3D107(1)016(2)0150AS 16.0 8 0.150 1.00
100 D TP3D107(1)016(2)0125AS 16.0 8 0.125 1.10
100 E TP3E107(1)016(2)0600AS 16.0 8 0.600 0.52
100 E TP3E107(1)016(2)0100AS 16.0 8 0.100 1.28
150 E TP3E157(1)016(2)0500AS 24.0 8 0.500 0.57
150 E TP3E157(1)016(2)0100AS 24.0 8 0.100 1.28
220 E TP3E227(1)016(2)0500AS 35.2 14 0.500 0.57
220 E TP3E227(1)016(2)0100AS 35.2 14 0.100 1.28
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 84 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
0.68 A TP3A684(1)020(2)10R0AS 0.5 4 10.000 0.09
0.68 A TP3A684(1)020(2)8000AS 0.5 4 8.000 0.10
1.0 A TP3A105(1)020(2)8400AS 0.5 4 8.400 0.09
1.0 A TP3A105(1)020(2)5500AS 0.5 4 5.500 0.12
1.5 A TP3A155(1)020(2)6300AS 0.5 6 6.300 0.11
2.2 A TP3A225(1)020(2)5900AS 0.5 6 5.900 0.11
2.2 A TP3A225(1)020(2)4000AS 0.5 6 4.000 0.14
2.2 B TP3B225(1)020(2)3500AS 0.5 6 3.500 0.16
2.2 B TP3B225(1)020(2)1500AS 0.5 6 1.500 0.24
3.3 A TP3A335(1)020(2)5900AS 0.7 6 5.900 0.11
3.3 A TP3A335(1)020(2)4000AS 0.7 6 4.000 0.14
3.3 B TP3B335(1)020(2)3000AS 0.7 6 3.000 0.17
3.3 B TP3B335(1)020(2)1300AS 0.7 6 1.300 0.26
4.7 A TP3A475(1)020(2)5000AS 0.9 6 5.000 0.12
4.7 A TP3A475(1)020(2)3500AS 0.9 6 3.500 0.15
4.7 B TP3B475(1)020(2)2900AS 0.9 6 2.900 0.17
4.7 B TP3B475(1)020(2)1000AS 0.9 6 1.000 0.29
4.7 C TP3C475(1)020(2)2300AS 0.9 6 2.300 0.22
4.7 C TP3C475(1)020(2)0600AS 0.9 6 0.600 0.43
6.8 B TP3B685(1)020(2)2500AS 1.4 6 2.500 0.18
6.8 B TP3B685(1)020(2)1000AS 1.4 6 1.000 0.29
6.8 C TP3C685(1)020(2)1900AS 1.4 6 1.900 0.24
6.8 C TP3C685(1)020(2)0550AS 1.4 6 0.550 0.45
10 B TP3B106(1)020(2)2500AS 2.0 6 2.500 0.18
10 B TP3B106(1)020(2)2100AS 2.0 6 2.100 0.20
10 B TP3B106(1)020(2)1000AS 2.0 6 1.000 0.29
10 C TP3C106(1)020(2)1700AS 2.0 6 1.700 0.25
10 C TP3C106(1)020(2)0500AS 2.0 6 0.500 0.47
10 C TP3C106(1)020(2)0450AS 2.0 6 0.450 0.49
15 B TP3B156(1)020(2)2300AS 3.0 6 2.300 0.19
15 B TP3B156(1)020(2)1000AS 3.0 6 1.000 0.29
15 C TP3C156(1)020(2)1500AS 3.0 6 1.500 0.27
15 C TP3C156(1)020(2)0400AS 3.0 6 0.400 0.52
15 D TP3D156(1)020(2)0900AS 3.0 6 0.900 0.41
15 D TP3D156(1)020(2)0300AS 3.0 6 0.300 0.71
22 C TP3C226(1)020(2)1100AS 4.4 6 1.100 0.32
22 C TP3C226(1)020(2)0375AS 4.4 6 0.375 0.54
22 D TP3D226(1)020(2)0700AS 4.4 6 0.700 0.46
22 D TP3D226(1)020(2)0225AS 4.4 6 0.225 0.82
33 C TP3C336(1)020(2)1000AS 6.6 6 1.000 0.33
33 C TP3C336(1)020(2)0350AS 6.6 6 0.350 0.56
33 D TP3D336(1)020(2)0700AS 6.6 6 0.700 0.46
33 D TP3D336(1)020(2)0200AS 6.6 6 0.200 0.87
47 D TP3D476(1)020(2)0700AS 9.4 6 0.700 0.46
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 85 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C; 13 VDC AT + 125 °C
47 D TP3D476(1)020(2)0250AS 9.4 6 0.250 0.77
47 D TP3D476(1)020(2)0200AS 9.4 6 0.200 0.87
47 D TP3D476(1)020(2)0150AS 9.4 6 0.150 1.00
47 E TP3E476(1)020(2)0600AS 9.4 6 0.600 0.52
47 E TP3E476(1)020(2)0150AS 9.4 6 0.150 1.05
100 E TP3E107(1)020(2)0500AS 20.0 8 0.500 0.57
100 E TP3E107(1)020(2)0150AS 20.0 8 0.150 1.05
25 VDC AT + 85 °C; 17 VDC AT + 125 °C
0.47 A TP3A474(1)025(2)12R0AS 0.5 4 12.000 0.08
0.47 A TP3A474(1)025(2)9000AS 0.5 4 9.000 0.09
0.68 A TP3A684(1)025(2)8400AS 0.5 4 8.400 0.09
0.68 B TP3B684(1)025(2)7000AS 0.5 4 7.000 0.11
0.68 B TP3B684(1)025(2)5000AS 0.5 4 5.000 0.13
1.0 A TP3A105(1)025(2)7600AS 0.5 4 7.600 0.10
1.0 A TP3A105(1)025(2)4000AS 0.5 4 4.000 0.14
1.0 B TP3B105(1)025(2)5000AS 0.5 4 5.000 0.13
1.0 B TP3B105(1)025(2)2000AS 0.5 4 2.000 0.21
1.5 A TP3A155(1)025(2)6700AS 0.5 6 6.700 0.11
1.5 A TP3A155(1)025(2)4000AS 0.5 6 4.000 0.14
1.5 B TP3B155(1)025(2)4600AS 0.5 6 4.600 0.14
1.5 B TP3B155(1)025(2)2000AS 0.5 6 2.000 0.21
2.2 A TP3A225(1)025(2)6300AS 0.6 6 6.300 0.11
2.2 A TP3A225(1)025(2)4000AS 0.6 6 4.000 0.14
2.2 B TP3B225(1)025(2)3800AS 0.6 6 3.800 0.15
2.2 B TP3B225(1)025(2)1500AS 0.6 6 1.500 0.24
2.2 B TP3B225(1)025(2)4000AS 0.6 6 4.000 0.24
2.2 C TP3C225(1)025(2)2200AS 0.6 6 2.200 0.22
3.3 B TP3B335(1)025(2)3100AS 0.8 6 3.100 0.17
3.3 B TP3B335(1)025(2)1500AS 0.8 6 1.500 0.24
3.3 C TP3C335(1)025(2)2300AS 0.8 6 2.300 0.22
3.3 C TP3C335(1)025(2)1000AS 0.8 6 1.000 0.33
4.7 B TP3B475(1)025(2)2800AS 1.2 6 2.800 0.17
4.7 B TP3B475(1)025(2)1500AS 1.2 6 1.500 0.24
4.7 C TP3C475(1)025(2)2000AS 1.2 6 2.000 0.24
4.7 C TP3C475(1)025(2)0525AS 1.2 6 0.525 0.46
6.8 C TP3C685(1)025(2)1700AS 1.7 6 1.700 0.25
6.8 C TP3C685(1)025(2)0500AS 1.7 6 0.500 0.47
10 C TP3C106(1)025(2)1500AS 2.5 6 1.500 0.27
10 C TP3C106(1)025(2)0450AS 2.5 6 0.450 0.49
10 D TP3D106(1)025(2)1000AS 2.5 6 1.000 0.39
10 D TP3D106(1)025(2)0300AS 2.5 6 0.300 0.71
15 C TP3C156(1)025(2)1200AS 3.8 6 1.200 0.30
15 C TP3C156(1)025(2)0425AS 3.8 6 0.425 0.51
15 D TP3D156(1)025(2)0800AS 3.8 6 0.800 0.43
15 D TP3D156(1)025(2)0250AS 3.8 6 0.250 0.77
22 C TP3C226(1)025(2)1200AS 5.5 6 1.200 0.30
22 C TP3C226(1)025(2)0400AS 5.5 6 0.400 0.52
22 D TP3D226(1)025(2)0700AS 5.5 6 0.700 0.46
22 D TP3D226(1)025(2)0200AS 5.5 6 0.200 0.87
47 E TP3E476(1)025(2)0600AS 11.8 6 0.600 0.52
47 E TP3E476(1)025(2)0200AS 11.8 6 0.200 0.91
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 86 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
0.10 A TP3A104(1)035(2)20R0AS 0.5 4 20.000 0.06
0.10 A TP3A104(1)035(2)10R0AS 0.5 4 10.000 0.09
0.22 A TP3A224(1)035(2)15R0AS 0.5 4 15.000 0.07
0.22 A TP3A224(1)035(2)6000AS 0.5 4 6.000 0.11
0.33 A TP3A334(1)035(2)13R0AS 0.5 4 13.000 0.08
0.33 A TP3A334(1)035(2)6000AS 0.5 4 6.000 0.11
0.47 A TP3A474(1)035(2)10R0AS 0.5 4 10.000 0.09
0.47 A TP3A474(1)035(2)4000AS 0.5 4 4.000 0.14
0.47 B TP3B474(1)035(2)8000AS 0.5 4 8.000 0.10
0.47 B TP3B474(1)035(2)2500AS 0.5 4 2.500 0.18
0.68 A TP3A684(1)035(2)7600AS 0.5 4 7.600 0.10
0.68 A TP3A684(1)035(2)4000AS 0.5 4 4.000 0.14
0.68 B TP3B684(1)035(2)6500AS 0.5 4 6.500 0.11
0.68 B TP3B684(1)035(2)2500AS 0.5 4 2.500 0.18
1.0 A TP3A105(1)035(2)7500AS 0.5 4 7.500 0.10
1.0 A TP3A105(1)035(2)6000AS 0.5 4 6.000 0.11
1.0 A TP3A105(1)035(2)4000AS 0.5 4 4.000 0.14
1.0 B TP3B105(1)035(2)5000AS 0.5 4 5.000 0.13
1.0 B TP3B105(1)035(2)2000AS 0.5 4 2.000 0.21
1.5 B TP3B155(1)035(2)4200AS 0.5 6 4.200 0.14
1.5 B TP3B155(1)035(2)2000AS 0.5 6 2.000 0.21
1.5 C TP3C155(1)035(2)3800AS 0.5 6 3.800 0.17
2.2 B TP3B225(1)035(2)3800AS 0.8 6 3.800 0.15
2.2 B TP3B225(1)035(2)2000AS 0.8 6 2.000 0.21
2.2 C TP3C225(1)035(2)2900AS 0.8 6 2.900 0.20
2.2 C TP3C225(1)035(2)0900AS 0.8 6 0.900 0.35
3.3 B TP3B335(1)035(2)3500AS 1.2 6 3.500 0.16
3.3 C TP3C335(1)035(2)2100AS 1.2 6 2.100 0.23
3.3 C TP3C335(1)035(2)0700AS 1.2 6 0.700 0.40
4.7 B TP3B475(1)035(2)3100AS 1.7 6 3.100 0.17
4.7 B TP3B475(1)035(2)1500AS 1.7 6 1.500 0.24
4.7 C TP3C475(1)035(2)1900AS 1.6 6 1.900 0.24
4.7 C TP3C475(1)035(2)0500AS 1.6 6 0.500 0.47
4.7 D TP3D475(1)035(2)1300AS 1.6 6 1.300 0.34
4.7 D TP3D475(1)035(2)0450AS 1.6 6 0.450 0.58
6.8 C TP3C685(1)035(2)1800AS 2.4 6 1.800 0.25
6.8 C TP3C685(1)035(2)0475AS 2.4 6 0.475 0.48
6.8 D TP3D685(1)035(2)1800AS 2.4 6 1.800 0.37
6.8 D TP3D685(1)035(2)1100AS 2.4 6 1.100 0.37
6.8 D TP3D685(1)035(2)0300AS 2.4 6 0.300 0.71
10 C TP3C106(1)035(2)1600AS 3.5 6 1.600 0.26
10 C TP3C106(1)035(2)0450AS 3.5 6 0.450 0.49
10 D TP3D106(1)035(2)0800AS 3.5 6 0.800 0.43
10 D TP3D106(1)035(2)0300AS 3.5 6 0.300 0.71
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 87 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C; 23 VDC AT + 125 °C
10 D TP3D106(1)035(2)0135AS 3.5 6 0.135 1.05
15 D TP3D156(1)035(2)0700AS 5.3 6 0.700 0.46
15 D TP3D156(1)035(2)0300AS 5.3 6 0.300 0.71
15 D TP3D156(1)035(2)0260AS 5.3 6 0.260 0.76
22 D TP3D226(1)035(2)0600AS 7.7 6 0.600 0.50
22 D TP3D226(1)035(2)0300AS 7.7 6 0.300 0.71
22 D TP3D226(1)035(2)0200AS 7.7 6 0.200 0.87
22 E TP3E226(1)035(2)0600AS 7.7 6 0.600 0.52
22 E TP3E226(1)035(2)0275AS 7.7 6 0.275 0.77
50 VDC AT + 85 °C; 33 VDC AT + 125 °C
0.10 A TP3A104(1)050(2)19R0AS 0.5 4 19.000 0.06
0.10 A TP3A104(1)050(2)10R0AS 0.5 4 10.000 0.09
0.22 A TP3A224(1)050(2)15R0AS 0.5 4 15.000 0.07
0.22 B TP3B224(1)050(2)12R0AS 0.5 4 12.000 0.08
0.22 B TP3B224(1)050(2)8500AS 0.5 4 8.500 0.10
0.33 B TP3B334(1)050(2)10R0AS 0.5 4 10.000 0.09
0.33 B TP3B334(1)050(2)4500AS 0.5 4 4.500 0.14
0.47 B TP3B474(1)050(2)8400AS 0.5 4 8.400 0.10
0.47 B TP3B474(1)050(2)4000AS 0.5 4 4.000 0.15
1.0 B TP3B105(1)050(2)6700AS 0.5 4 6.700 0.11
1.0 C TP3C105(1)050(2)4600AS 0.5 4 4.600 0.16
1.0 C TP3C105(1)050(2)1600AS 0.5 4 1.600 0.26
2.2 C TP3C225(1)050(2)2900AS 1.1 6 2.900 0.20
2.2 C TP3C225(1)050(2)1500AS 1.1 6 1.500 0.27
2.2 D TP3D225(1)050(2)2100AS 1.1 6 2.100 0.27
2.2 D TP3D225(1)050(2)0800AS 1.1 6 0.800 0.43
3.3 C TP3C335(1)050(2)2500AS 1.7 6 2.500 0.21
3.3 C TP3C335(1)050(2)1500AS 1.7 6 1.500 0.27
3.3 D TP3D335(1)050(2)1700AS 1.7 6 1.700 0.30
3.3 D TP3D335(1)050(2)0800AS 1.7 6 0.800 0.43
4.7 D TP3D475(1)050(2)1200AS 2.4 6 1.200 0.37
4.7 D TP3D475(1)050(2)0600AS 2.4 6 0.600 0.50
4.7 D TP3D475(1)050(2)0300AS 2.4 6 0.300 0.71
6.8 D TP3D685(1)050(2)0900AS 3.4 6 0.900 0.41
6.8 D TP3D685(1)050(2)0600AS 3.4 6 0.600 0.50
10 D TP3D106(1)050(2)0800AS 5.0 6 0.800 0.43
10 D TP3D106(1)050(2)0550AS 5.0 6 0.550 0.52
10 E TP3E106(1)050(2)0800AS 5.0 6 0.800 0.45
10 E TP3E106(1)050(2)0550AS 5.0 6 0.550 0.55
10 E TP3E106(1)050(2)0300AS 5.0 6 0.300 0.74
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz
(%)
MAX. ESR
AT + 25 °C
100 kHz
()
MAX. RIPPLE
100 kHz
IRMS
(A)
Note
• Part number definitions:
(1) Capacitance tolerance codes: K, M
(2) Terminations and packaging codes: C, D, E, F
(3) Lead (Pb)-free terminations and packaging codes: C, D
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 88 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperatures below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.6
10 6.0
16 10
20 12
25 15
35 24
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
4.0 2.5
6.3 3.3
10 5.0
16 8.0
20 10
25 12
35 15
50 24
TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A 0.075
B 0.085
C 0.110
D 0.150
E 0.165
0.1
1
10
100
1000
0.1 1 10 100 1000
ESR/Z,
Ω
FREQUENCY, kHz
IMPEDANCE
ESR
10 μF, 20 VDC, “C” Case
68 μF, 6.3 VDC, “B” Case
“B” and “C” CASE
0.1 1 10 100 1000
ESR/Z, Ω
1
0.1
0.01
FREQUENCY, kHz
“D” CASE
IMPEDANCE
ESR
220 μF, 10 VDC
330 μF, 6.3 VDC
TP3
www.vishay.com Vishay Sprague
Revision: 01-Mar-12 89 Document Number: 40116
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
A 2000 9000
B 2000 8000
C 500 3000
D 500 2500
E 400 1500
PRODUCT INFORMATION
Guide for Molded Tantalum Capacitors
www.vishay.com/doc?40074
Pad Dimensions
Packaging Dimensions
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.